I'm not able to get the link to download Acrobat Pro XI

Can someone please?

Hello

Please see the link download Pro or Standard versions of Acrobat DC, XI or X

Let us know if this helps!

Tags: Adobe

Similar Questions

  • Qosmio-F750-10N and Win8.1 - were not able to get the right BT drivers

    Hello

    Since upgrading my HARD drive and installing Windows 8 (.1), I was not able to get the right drivers for my Qosmio F750-10N Bluetooth.

    If I go through the section of drivers download site, the drop-down boxes of language and the region appear to be defective, so it shows me all the drivers.

    Tried to install a Toshiba Bluetooth stack generic but it doesn't seem to be able to recognize my Bluetooth device. Also tried to go through the Atheros website without much luck.

    Please could someone help or maybe post a link to a download mirror.

    Thank you very much.

    Hello

    First of all, it seems that the 8.1 win is not supported for Qosmio F750.
    So I might be difficult to operate BT

    However, AFAIK the Qosmio F750-10N was equipped with an Atheros AR9285 Wifi/BT card.

    This means that a single module shares the WiFi network and BT and you need to install the Atheros BT filter driver.
    Next to the BT filter installed, must install the driver of Toshiba system to win 8.1
    The pilot of this system must be installed before the filter of BT driver.

    But like I said: 8.1 win is not supported for this Qosmio unit and you won't find drivers Win 8.1 download section in the driver F750.

    But you should try the drivers released for the other, more recent Qosmio series; i.e. X 870

    Good luck

  • I bought an iphone6.  I registered. On the apple's music. But I'm not able to get the free month trial subscription

    I bought an iphone6.  I registered. On the apple's music. But I'm not able to get the free month trial subscription

    What happens when you try?

  • I'm not able to get the sound card drivers for a sony VAIO desktop computer

    I'm not able to get the audio drivers for a sony VAIO desktopPCV 2253 someone can help me get t for free

    Hello

    Check with the Sony Support, their drivers and documentation online and ask in their forums.

    Sony - Contacts
    http://eSupport.Sony.com/us/Perl/contact-land.pl

    Sony - drivers
    http://eSupport.Sony.com/Perl/select-System.pl

    Sony - Support
    http://eSupport.Sony.com/

    Sony - Forum
    https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.

    Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.

    So I spent all day on this because Adobe did not anywhere that I could find it. But I'm hoping some of you to save a lot of time wasted... you can't upgrade to the latest version of the application if you have not all updates to Windows 7.


    If you're like me and do not want anything to do with the Windows updates... you may encounter the same problem. Summer/don't I am not at all interested in Windows 10 (who they are sneaking into regular updates) so I don't usually have enabled updates. If you don't... you cannot upgrade your program to the latest version. Creative cloud not even give the option.


    I think it's the Microsoft Visual C++ or something like that who needs update to run the latest version of the software... If you do not have it on your system, you do not install the new updates properly, but be careful not to download sneaky windows 10 "update." Know how it's called blindly here before update you.

    I hope that helps some of you save a whole day unnecessarily.

    Some programs on a win os to visual c ++ 2015, Download Visual C++ Redistributable for Visual Studio 2015 of official Microsoft Download Center

  • Not able to get the value of the type defined in the other program

    Hi all

    I have create a type in a single package spec (Globally), now I'm using the same type in another package. Simply I'm calling the first package and try to store the value in the Type and use the same type in the second package.

    But I'm not able to get the value

    Type declaration

    Declared in package Spec

TYPE t_aa_derive_tbl_type IS TABLE OF xxxx%ROWTYPE;
   t_aa_derive t_aa_derive_tbl_type;

    Package 1

    Package1. PROCEDURE name(
some parameters);
is
Cursor
c1 is Select * from dual;

begin
      OPEN c_aa_derive;
        FETCH c_aa_derive
        BULK COLLECT INTO t_aa_derive;
        CLOSE c_aa_derive;
       
     END get_aa_derive;

    In my second package

    I'll call you

    Package1. PROCEDURE name(
some parameters);

and then i am trying to

for i in 1 .. package1.t_aa_derive.COUNT
  LOOP

....

....
...

end loop;

    I can not entered the loop for some reason any.

    Could someone guide me if anything I missed.

    See you soon,.

    San

    And what did you like refcursor c_aa_derive in the call to package1.name? Is it returns all rows? If this isn't the case, COUNT will be 0.

    SY.

  • Not able to get the page bean object bar button in the extended controller

    Hi all

    I'm not able to get the bean button object in my page. But I'm not able to get the buttonbar descriptor itself. any idea?

    Structure of the page is:

    PageLayout - having not controller
    -buttonbar
    -button1
    -submitbutton2
    -regiion1(stack layout)-controller assigned (seededCO)

    I extend the seededCO and I'm trying to get the handle of bean button1 by the following code.

    OAPageButtonBarBean pbb = (OAPageButtonBarBean) webBean.findIndexedChildRecursive ("buttonBar");
    if(PBB!=null)
    {
    System.out.println ("PBB" + PBB);
    BB = (OAButtonBean) pbb.findIndexedChildRecursive ("button1");
    }

    Hello

    Try like this,
    Import oracle.apps.fnd.framework.webui.beans.nav.OAPageButtonBarBean;
    Import oracle.apps.fnd.framework.webui.beans.nav.OAButtonBean;

    PBar = OAPageButtonBarBean
    (OAPageButtonBarBean) pageContext.getPageLayoutBean () .getPageButtons ();
    OAButtonBean = ctButton
    (OAButtonBean) pBar.findIndexedChildRecursive ("YourRequiredButtonName");

    Thank you

    With respect,
    Kali.
    OSSi.

  • I have the link to download acrobat adobe 11

    I have the link to download acrobat adobe 11

    Hi harjeetd83735855,

    You can download Adobe Acrobat XI (11) here:

    " Download Pro or Standard versions of Acrobat DC, XI or X

    Kind regards
    Maurice

    This answer was helpful? Please consider marking it as 'Useful' or 'Right answer' (as appropriate) to help future customers with the same problem. Thank you!

  • not able to locate the link HERE, in this FORUM mozilla firefox, change my password HERE. How can I change my password for mozilla help forum (only one)?

    I want to be part of this mozilla firefox support community forum. That's what I call it: a help forum. but it's sorta a little ironic, don't you think (?) that I'm not able to change my password, here, on this forum.

    do you know how I can change my password for THIS website in mozilla firefox help? There is no link that takes me to this particular thing. It is not available in all the links that are related to my profile. If I can not log on in the future, what good is to join?

    Bellissimo! I am so grateful. It worked! I might suggest that a link to change your password is immediately visible at the top of page for new members of this forum.

    I am also very grateful with the rigor that you put into your response, because it gives me the way to mark this issue as being resolved, too. Be healthy and happy!

  • Not able to install the common module on satellite Pro A120

    Hi guys:
    I recently reinstalled xp professional on my satellite pro A120. I could download and install the main drivers of http://uk.computers.toshiba-europe.com and my phone is functional. However, I did not all sounds and (F6 & F7 and toggle) function keys not working, even after insalling the sound card. I read some of the posts on this forum and found that I needed insall the 'common' module to make them functional. I downloaded the driver from module common too, but when I run the Setup it starts initially, but fails both the configuration is complete.

    The same thing happens also with a few other drivers as saver of energy etc... I was not able to run the Setup program for the common module & driver power saver, basically, nothing happens after I have the respective installation.

    Can anyone help please?

    Pravesh

    As far as I know on the download page you can find the installation instructions with exact installation document order how to install drivers and tools specific to Toshiba and utilities.
    You have installed all the stuff after this installation order?

  • Because getting an email that recurs every 5 minutes, we were not able to get the new email, even from block the bad email.

    An email was sent to our account from an iPhone; the e-mail contained two photos. For the next two days, that E-mail reproduces itself in our Inbox (with the same time/date) more than two hundred times... like every 8 minutes. I have blocked using the object, and those still in the Inbox disappeared. (We were constantly moving them to the trash). A computer guru suggested I unlock now, and he has not returned. However, because the e-mail arrived Wednesday morning we have not been able to get new emails. They appear on in Yahoo email, but nothing will come by Thunderbird. (Get new emails seems to be "stuck"). Our Norton account has done many tests, and that did not help. Can someone help us get our email back to normal? Moreover, the same email/photos were sent to two other people of the same phone I, and they had no problem at all with him.

    Menu help > troubleshooting information.

    Please copy to the Clipboard and paste the information into a message here so your settings can be checked.

    Connect to your e-mail account using a browser (webmail ;) and delete the e-mail following undownloaded (in case it is corrupted))

  • Not able to get the values of distict even after the definition of the FUNCTION of MEMBERSHIP card

    Hello

    I'm trying to get distinct values of a query to an array type. Please see the code below
    CREATE OR REPLACE TYPE T_COPY_EVNT_DTL
IS
  OBJECT
  (
    eventId               VARCHAR2(100),
    eventDescription      VARCHAR2(100),
    promoMonthDescription VARCHAR2(100),
    promoStartDate        VARCHAR2(100),
    promoEndDate          VARCHAR2(100),
    PROMOCOSTSTARTDATE    VARCHAR2(100) ,
    ,
    MAP MEMBER FUNCTION sort_key
    RETURN VARCHAR2 );
CREATE OR REPLACE TYPE BODY T_COPY_EVNT_DTL
AS
  MAP MEMBER FUNCTION sort_key
  RETURN VARCHAR2
IS
BEGIN
  RETURN eventId ;
END;
END;
/
CREATE OR REPLACE TYPE T_EVENT_TABLE
IS
  TABLE OF T_COPY_EVNT_DTL; 

          with event_data as (
select '1' event,'event1' event_desc,'monthdesc1' promo_month_desc ,'01/01/2001' promo_start_date     ,'01/01/2002' promo_end_date,'01/02/2001' promo_cost_start_date from dual union all      
select '1' event,'event1' event_desc ,'monthdesc1'promo_month_desc ,'01/01/2001' promo_start_date     ,'01/01/2002' promo_end_date,'01/02/2001' promo_cost_start_date from dual union all
select '3' event,'desc3' event_desc ,'monthdesc3' promo_month_desc,'01/01/2001' promo_start_date     ,'01/01/2002' promo_end_date,'01/02/2001' promo_cost_start_date from dual union all
select '2' event ,'desc2' event_desc ,'monthdesc2' promo_month_desc ,'01/01/2001' promo_start_date     ,'01/01/2002' promo_end_date ,'01/02/2001' promo_cost_start_date from dual ) 
SELECT  cast(collect(distinct t_copy_evnt_dtl(event,
                                                                                                                    event_desc,
                                                                                                                    promo_month_desc,
                                                                                                                    promo_start_date,
                                                                                                                   promo_end_date,
                                                                                                              promo_cost_start_date) ORDER BY
                                                            event_desc,
                                                            promo_month_desc,
                                                            promo_start_date,                                                    
                                                            promo_end_date,                                            
                                                            promo_cost_start_date) as t_event_table)  from event_data;

result :

T_EVENT_TABLE('T_COPY_EVNT_DTL('2','desc2','monthdesc2','01/01/2001','01/01/2002','01/02/2001')',
          'T_COPY_EVNT_DTL('3','desc3','monthdesc3','01/01/2001','01/01/2002','01/02/2001')',
          'T_COPY_EVNT_DTL('1','event1','monthdesc1','01/01/2001','01/01/2002','01/02/2001')',
          'T_COPY_EVNT_DTL('1','event1','monthdesc1','01/01/2001','01/01/2002','01/02/2001')')
    Please help me find the reason why it does not work...

    Manjusha Muraleedas wrote:
    Please see the link: http://www.oracle-developer.net/display.php?id=514
    Title: using complex types

    And as the article says, combining DISTINCT and ORDER BY does not work so well:

    The diagram of the syntax in the documentation suggests that the two extensions can be combined to build ordered and distinct collections for each group.
    However, in the version 11.2.0.1, this does not work.

    I can confirm that this does work on 11.2.0.2 either.

    As a solution, I would probably use a subquery or MULTISET:

    select cast(
         multiset(
           select distinct
                  event
                , event_desc
                , promo_month_desc
                , promo_start_date
                , promo_end_date
                , promo_cost_start_date
           from event_data
           order by event_desc
                  ,     promo_month_desc
                  ,     promo_start_date
                  ,     promo_end_date
                  ,     promo_cost_start_date
         )
         as t_event_table
       )
from dual;

  • Not able to get the 192.168.1.1 console configuration in Bridge Mode only

    Hello

    I use the Linksys WAG200G wireless modem and connection mode is ' Bridge Mode Only ', in this mode I do not get the console configuration 192.168.1.1 and Wifi set-up. Please help me to solve these problems. Appreciate your help. Thank you.

    1. you set a static IP address, for example 192.168.1.2 mask 255.255.255.0 on the computer and he wire the WAG to get access.

    2. do not allow the wireless and basically anything else on the WAG during a bridge mode. In bridge mode, it works like a standard modem and all you can change is the modem related settings.

  • Why it is that I am still not able to get the promo email ' Promo time offer limited Add Windows Media Center for Windows 8 Pro?

    Waited for almost 12 hours for the email to arrive... still not able to receive it... have already sent around 2 to 4 times of request... still not received the email... Why is that i am not yet receive? already checked my spam and trash folder... its still not in there.what do?

    You should have around 24 hours after you provide your email address for this promotion.

  • not able to get the response of an async bpel process

    How to get the answer of async bpel

    What DO YOU call the ASYNC SERVICE. USE INVOKE TO CALL AND USE A RECEIVE ACTIVITY TO RECEIVE THE RESPONSE.

    should work...

Maybe you are looking for