HP ProBook 4520 s wirelless card

Similar Questions

• ProBook 4520 s - exchange of the wireless network card

  Hello everyone.

  I think the exchange of the wireless network card in my Probook 4520 s, due to the low flow.
  So I searched for a while a 5 Ghz supporting the card and found out that I am only able to get in the "white" cards list working. Then I looked at this page:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c02487851 & jumpi...

  These cards can be any, that have been used in 4520 s. Mine (according to the Device Manager) is the Broadcom 4313 802.11b/g/n. This thing only supports 2.4 Ghz. Now, I looked at the list for a 5 Ghz supporting the card. I think that the 802.11A/B/G/N WLAN Intel HMC 572520-001 minicards can operate on 5 Ghz, because I read, that A appears only with maps of 2.4/5 Ghz. I read too, that maps of 2.4 / 5 GHz have 3 antennas, but on this card I only the slots for 2. Is this good? And this card would go into my 4520 s?

  Greetings,

  Colony

  Hi, colony:

  You are right about your statement about the cards being described as A/B/G/N dual-band.

  The best thing to do is look at Chapter 3 of your service manual.

  You can only order one of the cards listed as supported and it MUST have the HP reference on it or it won't work.

  I see only two possibilities for you...

  The 6200 Intel and Broadcom 4322.  Make sure you also get the part # that corresponds to what country you live.

  If your current Broadcom card has integrated Bluetooth, you will lose your Bluetooth capability if you order an integrated HP bluetooth module and probably the cable too.

  None of the dual-band cards have embedded bluetooth.

  Link to the service manual.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02439213/c02439213.PDF

  Then, you can order a card on the link below.

  If you do not live in the United States, you can change your country at the top of the page to yours.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6857BCBBC4CD4470B9282F130A563697

  Paul

• ProBook 4520 s: lack of features on a ProBook 4520 s after upgrade Windows 10

  Hello dear community

  Long story short: I have a HP ProBook 4520 s and yesterday I upgraded manually (with the tool provided by MS) Windows 7 Pro to Windows 10 Pro. Everything went very well and smooth and it works perfectly well until now.

  The problem is that some of the features of the laptop no longer work. Here are some examples:

  -Highlight the option on touchpad

  -built-in camera

  -Some FN buttons like the one for the brightness of the screen while others (for example, the volume and email) working

  My reasoning is that it lacks certain drivers or these functions are somehwat is not compatible with the new OS (it's a 5 + year old PC after all), but I could be wrong. I'd like to hear some suggestions and opinions on this.

  If someone needs to my specifications complete, there are:

  Operating system: Windows Pro 64-bit 10
  CPU: Intel Core i3 330M @ 2.13 GHz 61 ° C Arrandale 32nm technology
  RAM: 4.00 GB Dual - Channel DDR3 @ 532 MHz (7-7-7-20)
  Motherboard: Hewlett-Packard 1411 (CPU 1)
  Graphics card: monitor generic PnP (1366x768@60Hz)
  512MB ATI Mobility Radeon HD 4500 Series (HP)
  Storage: 1043GB Western Digital WDC WD1001X06X-00SJVT0 (SSD) 42 ° C Black2
  Optical drives: DTSOFT device CdRom virtual hp DVDRAM GT30L
  Audio: AMD High Definition Audio Device

  Thank you for reading. All the tips and comments are appreciated.

  Cap.

  Hello

• HP Probook 4520 s: HP Probook 4520 s and Windows 10 > Bluetooth

  Dear jury,

  has obtained a ProBook 4520 s with a Wifi/Bluetooth Combo of Ralink.

  Updgraded to W10 64bits.

  Everything works fine, exceppt Bluetooth,

  be struggling for 2 weeks and about to give up :-(

  any suggestions, the steps, the pilots could work?

  Thanks in advance

  Christoph, Philippines

  Hi, Christoph:

  Unfortunately the Ralink BT 3.0 or earlier version of hardware does not work in 8.1, W8 and W10.

  Ralink cards with hardware version 4.0 BT have supported for these operating systems.

  If you want internal bluetooth, you will need to replace the Board with one of those enrolled in the service manual wireless.

  The only other wlan supported with BT that I see listed is this one...

  WiFi 802.11b/g/n 1 x 1 Broadcom 2070 Bluetooth 2.1 + EDR Combo adapter and 4313 - reference HP 600370-00.

  I believe that the bluetooth radio and model wireless card will work on W10, but I can't say 100% for sure.

• HP ProBook 4520 s problems

  Hello

  I recently installed windows XP on my ProBook 4520 s, and I have a problem with my network controller. I can't find the driver for it, even you I've tried a few, but they did not work and I can't connect to the internet.

  Can you please give me a list of software that I install on my laptop? I know that they are in the tab support & driver but I don't really know which is useful or not for my windows XP.

  My product and serial number are: WK511EA #ABB (the product) and {removed privacy} (series)

  Thank you very much

  D. Sorin

  Hello:

  The device that you posted is your HP Bluetooth module:

  This driver and software should take care of this.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145198&prodNameId=4145326&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-80152-1

  What is the string of letters and numbers of your wired network card device ID?  It appears in Device Manager?  If this isn't the case, you must go into your BIOS and in device configuration menu, make sure that your LAN controller is enabled. If this is the case, then set the LAN/WLAN switching for people with reduced mobility if it is set to active.

  You must save the settings, where you changed by pressing the F10 key and exit the BIOS.

  Paul

• HP Probook 4520 s memory 8 GB (2x4gb) Corsair pass without success and failure

  OK, here's the story

  My laptop is HP Probook 4520 s

  with Windows Windows 8.1 (6.3) 64-bit (Build 9600)

  Please see the end of this post for CPU - Z report of specs.

  Currently I have 3 GB of memory installed - had to install their return after failed upgrade.

  Please check back the CPU - Z report for the memory module specifications.

  I bought the memory pack 2 x 4 GB Corsair following

  Corsair CMSO8GX3M2A1333C9 8 GB (2x4gb) 1333 MHz DDR3 SODIMM

  http://www.scorptec.com.au/product/memory/SODIMM/43657-CMSO8GX3M2A1333C9

  Plug new modules:

  Lifetime warranty
  Size 8 GB (2 x 4 GB) Kit
  Performance profile none
  Fan included no.
  Heat spreader-
  Configuration memory dual channel
  Type of DDR3 memory
  Package - memory Pin 204
  Package - Format memory SODIMM
  Tested voltage 1.5
  SPD tension 1.5
  PC3-10600 (1333 MHz) memo speed
  SPD speed 1333 MHz
  Tested speed 1333 Mhz
  Tested latency 9-9-9-24
  SPD 9-9-9-24 latency

  When I installed the memory module on the laptop, I couldn't go essentially exceed the stage of the POST. Is the HP logo appears on the screen and what is it... That's all... nothing beyond this point.

  When I went to the BIOS settings, memory read 81xxMB successfully, it is essentially 8 GB of RAM.

  I tried to reset the BIOS settings, has not yet.

  I removed the 2 x 4 GB modules, put back the two original modules of 1 GB and 2 GB - those who came with the laptop-, everything worked again.

  What was not right here... ?

  PS please don't answer not with lame answers "it's weird", "that's strange", I know it's weird and strange. I want clear and specific suggestions.

  Report of CPU - Z below:

  TXT of CPU - Z report
  -------------------------------------------------------------------------

  Binary files
  -------------------------------------------------------------------------

  CPU - Z version 1.69.0.x64

  Processors
  -------------------------------------------------------------------------

  Number of processors 1
  Number of threads 4

  APICs
  -------------------------------------------------------------------------

  Processor 0
  -Core 0
  -Wire 0 0
  -Thread 1 1
  -Core 2
  -0-4 wire
  -Wire 5 1

  Timers
  -------------------------------------------------------------------------

  Timer ACPI 3,580 MHz
  Timer HPET 14,318 MHz
  Timer perf 2,208 MHz
  Sys 1,000 KHz timer
  Timer 133,02 MHz BCLK

  Information for processors
  -------------------------------------------------------------------------

  Processor 1 ID = 0
  Number of cores 2 (max 8)
  Number of threads 4 (max. 16)
  Name Intel Core i5 430M
  Code-named Arrandale
  Specification Intel (r) Core i5 CPU M 430 2.27 GHz
  Package (platform ID) Socket 989 rPGA (0x4)
  CPUID 6.5.2
  CPUID long 6.25
  Core Stepping C2
  The 32nm process technology
  TDP limit 25 Watts
  Basic speed 2527,3 MHz
  Multiplier x Bus 19.0 x 133.0 MHz speed
  2394,3 MHz rated Bus speed
  Stock frequency 2266 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT - x
  Data L1 cache 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB, size 4-way set associative line, 64 bytes
  L2 cache 2 x 256 KB, size 8-way line set associative, 64 bytes
  Cache 3 MB L3, size 12 channels line set associative, 64 bytes
  FID/VID control Yes

  Turbo Mode supported, enabled
  2533 MHz Max turbo frequency
  Max-non-Turbo report 17 x
  Max turbo report 19 x
  Rate of return max 9 x
  TDC limited 21 amps
  Basic NT 21 Watts
  Uncore PDT 4 Watts
  Power @ 9 x 7 Watts
  Power @ 10 x 8 Watts
  Power @ 11 x 9 Watts
  Power @ 12 x 11 Watts
  Power @ 13 x 13 Watts
  Power @ 14 x 15 Watts
  Power @ 15 x 18 Watts
  Power @ 16 x 21 Watts
  Power @ 17 x 25 Watts
  Number of bus max 255
  PCI peripheral device connected to the 255 bus, device 2, function 1

  Chipset
  -------------------------------------------------------------------------

  Northbridge Intel Havendale/Clarkdale Host Rev. Bridge. 12
  Southbridge Intel HM57 Rev. 06
  Graphics interface PCI-Express
  Width link PCI-E x 16
  PCI-E Max Link width x 16
  Type of DDR3 memory
  Memory size 3 GB
  Double channels (symmetrical)
  Frequency 532,1 MHz memory (04:16)
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Time to Row Refresh Cycle (tRFC) 60
  Control rate (CR) 1 t
  Base address e/s MCHBAR 0x0FED10000
  E/s MCHBAR size 4096
  MCHBAR records

  DMI
  -------------------------------------------------------------------------

  DMI BIOS
  vendor Hewlett-Packard
  version 68AZZ version F.0F
  Day 18/02/2011
  ROM size 2560 KB

  System DMI information
  Manufacturer Hewlett-Packard
  product HP ProBook 4520 s
  Unknown version
  series 2CE0211M4C
  UUID {1520830E-6A57-11DF-8C36-42C05900004D}
  SKU WS879EA #ABV
  family 103C_5336AN

  DMI Baseboard
  vendor Hewlett-Packard
  model 1411
  review of KBC Version 57,34
  series 2CE0211M4C

  DMI system box
  Manufacturer Hewlett-Packard
  chassis type Notebook
  2CE0211M4C series chassis

  DMI processor
  Manufacturer Intel(r) Corporation
  model Intel (r) Core i5 CPU M 430 2.27 GHz
  clock speed 2264,0 MHz
  The FSB 133.0 MHz speed
  multiplier x 17.0

  DMI Extension slot
  PCI SLOT1 designation
  type of PCI
  32-bit width
  No. populated

  DMI OEM channels
  String [0] 70/71 79 7 ABS has 7 b 7 c
  v01.4A CSM chain [1]
  chain [2] www.hp.com

  DMI physical memory matrix
  location motherboard
  use system memory
  correction no
  Max 8192 MB capacity
  Max # of devices 2

  DMI memory device
  name high-Slot 1 (top)
  format SODIMM
  unknown type
  width total 64-bit
  64-bit data width
  Size 2048 MB

  DMI memory device
  name high-Slot 2 (under)
  format SODIMM
  unknown type
  width total 64-bit
  64-bit data width
  size 1024 MB

  Storage
  -------------------------------------------------------------------------

  Drive 0
  Device path \\?\scsi#disk&ven_&prod_st9320423as#4&1f4bc32b&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
  Type set
  Name ST9320423AS
  Capacity GB 298,1
  SMART Support Yes

  USB devices
  -------------------------------------------------------------------------

  Generic USB hub USB Device class = '0 x 09' subclass = 0 x 00, seller = 0 x 8087, product = 0 x 0020
  Peripheral USB device USB Composite class = '0xEF' subclass = 0 x 02, seller = 0 x 0461, product = 0x4DB6
  Generic USB hub USB Device class = '0 x 09' subclass = 0 x 00, seller = 0 x 8087, product = 0 x 0020
  Peripheral USB Microsoft mouse and detection (USB) keyboard driver, class = "0x00" subclass = 0 x 00, vendor = 0x045E, product = 0 x 0745

  Graphics
  -------------------------------------------------------------------------

  Number of cards 1

  API chart
  -------------------------------------------------------------------------

  ATI I/O API

  Graphics cards
  -------------------------------------------------------------------------

  Display adapter 0
  Name ATI Mobility Radeon HD 4500 Series (Microsoft Corporation - WDDM v1.1)
  Manufacturer 0x103C (0 x 1411)
  512 MB memory size
  Bus device PCI 1 (0x1), device 0 (0x0), function 0 (0x0)
  Vendor ID 0 x 1002 (0x103C)
  The model 0 ID 9555 x (0 x 1411)
  Performance level 0

  Win32_VideoController AdapterRAM = 0x20000000 (536870912)
  Win32_VideoController DriverVersion = 8.97.10.6
  Win32_VideoController DriverDate = 20/06/2012

  Software
  -------------------------------------------------------------------------

  Windows Version Microsoft Windows 8.1 (6.3) 64-bit (Build 9600)
  Version of DirectX 11.0

  Clear and precise. Your laptop uses the memory of 1.35 volts and that you have installed 1.5 volt.

  This is the crucial page for memory you need:

  http://www.crucial.com/store/listparts.aspx?model=ProBook%204520s

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ProBook 4520 s - HP Recovery Manager?

  Hi-

  I have a new Probook 4520 s, product #XT989ut, Windows 7 Professional factory-installed.  I got no CD, DVD or any other media.  I want to make a system image backup, I can restore it on a new hard drive full hard drive failure. HP Recovery Manager is not on my laptop and I can't find a version for my laptop on HP's web site.

  What is the HP solution for a total failure of the hard drive on this laptop?  Is there a version of HP Recovery Manager?  If I need to use Microsoft Backup, then I need a Windows 7 installation disc, then how can I get this drive?

  Thank you

  Hello:

  I would order a set of recovery disc for your laptop. I don't think that any professional laptops come with a restore CD game more. My new 6930p did not come with a game, so I ordered a set for $10.00. Mine came with Vista Business 32-bit. I was disappointed that the restore for the 6930p disc contained only a 32 bit OS disc.

  What good is being able to install 8 GB of memory in this machine, when you only have a 32 bit OS?

  Oh, well... I have a restore disc Vista Business 64-bit I can use of a 6910p.

  Anyway, if you live in the United States or the Canada, here's how to get a set of restore for your PC disks:

  1. Enter the reference number and the serial no on the underside of the computer on the white label. The model # is one 4520 s HP-Compaq, but the part number is on this tag below the serial number.

  2. call HP at 1-800-952-7689, option 1 (ranking in the list in the option made restore disks).

  3. provide the information asked by the representative who answers the phone. Some simply ask the serial number, some want at the same time, or they'll want just the serial number and the type of computer (4520 s). I hope that your restore disks set W7 will ship with two disk OS 32 and 64-bit as one made for my 6910p.

  4. do you have a Master Card or Visa ready for purchase. They do not take discover. I believe that you will be charged $10.00.

  You will receive the discs by first class mail, or you can pay an additional $10.00 for shipping FedEx.

  Paul

• ProBook 4520 s: upgrading my ProBook 4520 s

  Hey there dear community,

  I have been using my HP ProBook 4520 s for more than 5 years. It serves me well throughout my college and colleges after years so I decided to try to muscle it a little rather than change. My current system specs are (have it with Speccy):

  Operating system: Windows Pro 64-bit 10
  CPU: Intel Core i3 330M @ 2.13 GHz 61 ° C Arrandale 32nm technology
  RAM: 4.00 GB Dual - Channel DDR3 @ 532 MHz (7-7-7-20)
  Motherboard: Hewlett-Packard 1411 (CPU 1)
  Graphics card: monitor generic PnP (1366x768@60Hz)
  512MB ATI Mobility Radeon HD 4500 Series (HP)
  Storage: 1043GB Western Digital WDC WD1001X06X-00SJVT0 (SSD) 42 ° C Black2
  Optical drives: DTSOFT device CdRom virtual hp DVDRAM GT30L
  Audio: AMD High Definition Audio Device

  Now, I have done my share of reading and I reach two conclusions:

  -This laptop simply is not designed to work image or processors so my two options above are dual-core i5 or i7 CPU.

  From what I've read here and there, the most optimal processor that can be used on this particular device are the i7 - 640M, i7 - 620 M and i5 - 580 M. I understand that if I go with either of these three, productivity would increase with about 25-30%.

  -J' have already updated the 3 GB memory to 4 GB, but to my understanding of this laptop supports up to 8 GB of memory, so I'm considerring getting a 2 x 4 GB DDR3 PC3-10600 • CL = 9 • unbuffered NON - ECC DDR3 - 1333 • 1.5V 512Meg x 64 kit SDRAM SO-DIMM 204-PIN.

  My storage is pretty much the best thing to get for this laptop (there the SATA2 port (3 Gbps)) a full 1 TB SSD would be a bit pointless.

  My questions are:

  -Are there problems or other things to consider about the possible CPU upgrade? I would love to see a video tutorial on how properly to the replacement

  -Am I missing something with the memory upgrade? I'm a little hesitant on that tensions must be on the memory sticks (1.35v or 1.5V).

  -Are there else I can do for this in order to make a little more current (drive optical swap with something else, etc..)?

  I really appreciate every suggestion and comment.

  Thank you!

  Cap

  I7 - 640 M is the top processor of the page. Memory DDR3-1066 and is 1.5 volt. The most recent memory of 1.35 volts to the DDR3-1600 not will probably support. HP recommends this:

  4 GB (PC3-10600 1333 MHz, DDR3) 599092-001

  http://www.Amazon.com/HP-DDR3-SDRAM-memory-module/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1438431520&SR=8-1&keywords=599092-001

  Your repair manuals

  YouTube video

  Technology in the video does not actually remove the CPU but it shows. Remove the processor carefully by turning the locking screw for "open" and lift the CPU out. Be extremely careful with the pins. The new line backup the same orientation as the old and drop it in. Just be sure to block the processor setscrew down tight when you go back. You must follow the instructions on the installation of thermal paste and cleaning.

  You can also consider a SSD drive. The gains to be achieved will be more sensitive than the CPU or memory. Also keep an eye on what you spend and make sure it makes sense. If I could only do an upgrade, it would be the SSD. I would like to bother with a Blu - Ray player on a laptop.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Probook 4520

  Hello everyone, I have a Probook 4520 and the operating system is Windows 7, I'm having a problem connecting to the internet, all other laptops work in the household.  I have it connected directly to the router with the ethernet cable but still no luck.  What is my network card?  The top of the tower was pretty hot on that side also before it stop working.  Any suggestions on what could be the problem would be useful and if it's the network card, which is something that I could replace my car, or must it be done professionally?

  Hi libralyn,

  Welcome to the Forums of HP Support!

  I understand that you have a problem connecting to the internet with your laptop HP ProBook 4520.  Your laptop HP ProBook 4520 is a professional computer, and you get the best answer to your questions on the trading forums. You can do the HP Enterprise business community.

  In the meantime, here is your support page of laptop HP ProBook 4520 s , which you may find useful.

  I hope this information helps.

  Be careful and good luck with your HP Probook!

• HP Probook 4520 s not power up! Help with the power button light / stop!

  HP Probook 4520 s not power up! The power led button summons and after 3 seconds its the same constituent but still not be able to. Please help me with this problem.

  It was the last resort.

  Your laptop seems to have a hardware failure on the system board.

  It will require the replacement of the card system to return the laptop to a useful condition.

  I wish I have had better news for you.

• ProBook 4520 s: updates to driver for all components

  Salvation; I read the posts on the update of the drivers on the ProBook 4520 s and I do not understand that we should select the most recent drivers from the drop-down list under EACH item listed.  I'm still a bit confused, however.  Some components have several drivers listed under them, some of which have different names/Descriptions.  I need to know WHICH of these "components named" is installed on my ProBook?  Alternatively, they are ALL different names in EACH of the installed components?  I'm afraid to install the wrong drivers if I select just the most recent review date, irrespective of the name/description.  I have had my ProBook 4520 s about 5 years and NEVER updated ALL drivers (that I can remember).  I am running Windows 7 Professional, 64-bit with the Intel Core i5 460 M/2.53 GHz Quad Core processor, a 320 GB Serial ATA-300, 7200 RPM hard drive and a HD Graphics Dynamic video memory technology Intel graphics controller, etc., etc.  The problems I encounter are: it is slow to start, it delayed opening opening sites & programs & there is a power outage occasional temporary graphics (gel?).  So, at the very least, I think that my graphic card driver needs to be updated.  But surely most other pilots must update as well.  (And Internet HP site lists a ton of drivers when I plug my ProBook.  I use my laptop every day and have not had a major problem.  I recently had to update the drivers on my HP printer, and even if the printer is NOW printing again, I ALWAYS shows an error on the ProBook (when I go in devices & printer from the control panel), on the Officejet Pro 8600 Plus e-all-in-one. As the error message did not disappear after I solved the printing problem, I think it's probably a good idea to update ALL the drivers in my ProBook before I start to experience more problems... Is someone can you PLEASE help me understand WHAT drivers should I install and in WHAT order, so I do not screw up my ProBook?  Thank you very much!  I appreciate all help.

  Go to the Device Manager in Control Panel, check the names of the devices under each category. Download the latest version of the one you want from the HP support page depending on the installed operating system

• HP ProBook 4520 s USB 3.0

  Hello

  I only have HP ProBook 4520 s with USB 2.0. Must be made some BIOS upgrade if I want to add USB 3.0 Express Card 34, or it will not work properly?

  No BIOS upgrade is needed. You will need a driver. I guess you have to least Windows7. A driver disc will probably come with the unit.

  If that's the answer you need, please click on accept as Solution so that others can find it later.

• HP probook 4520 s ram replacement for

  I have hp probook 4520 s

  running windows 7 ultimate 64-bit

  Intel core i5 cpu M460 2.53GH

  RAM 4 GB

  ATi mobility radeon HD 4300/4500 series graphics card

  Dedicated video memory: 512 MB

  1719 MB shared system memory

  total avalible: 2231 MB
  My quistion is: if I upgrade my RAM to will of 8 GB that improve my performance of the graphics card? specially for the games?

  and there at - it something I can do to improve the performance of my game?

  This will help a little bit, but not enough to make unplayable games playable. The only thing you can do is to make sure that you have the latest drivers and the game settings a lower value.

• BSOD BCCode 116 - generated after installing updated drivers for ATI Mobility Radeon HD display drivers for HP Probook 4520 s 5470

  I continue to work through issues with my HP Probook 4520 that is now almost 4 years with the same problem of a frozen screen.

  Today, I decided to work in seeing if there was new ATI Mobility Radeon HD 5470 available display drivers.

  I have the version of 15/03/2011 of the ATI Mobility Radeon HD 5470.  With that came the AMD Catalyst install Manager Version 3.00.0868

  .

  During his visit the HP site I saw that they had a newer version available on the graphics card available with the date of April 30, 2011 and the download file has been identified as sp52818.exe for the Version of the graphics driver to download 8.743.2-- 110315 5A - 115833C.

  In light of the penalty, that I got with my graphic display driver 15/03/2011, I decided to uninstall the drivers of my 15/03/2011 and download the drivers of 30/05/2011.

  Doing this has my computer I notified that I already have the sp52818.exe file and so I was a little confused, but I allowed him to install over my existing file.

  To install the file sp52818.exe successfully, I went to work.  Then after some time (within an hour), I got a message generated by computer at the bottom right of my screen saying a newer version of my graphics card was available at www.amd.com .

  (first thought was - why HP had it?)

  In any case... I decided to click on the suggestion box, visit www.amd.com and see what they had.  I was directed to install a driver to automatically detect the utility, and during the installation, the utility's suggestion came back that my computer can access a new graphic display driver.  I thought it was nice and so I then proceeded to of course download the .exe file for my HP probook 4520 s.  The proposed file was qualified: 13-12_mobility_win7_win8_64_dcl_ccc_whql_exe (graphic display for the ATI Radeon HD 5470 by suggestion of AMD driver.)

  Everything goes well.  It starts to download the Catalyst install Manager Version 08.00.0915, then the ATI display drivers with > .NET Framework 4.5 (I'm just observing things that are facts).  Several times the black screen comes on, but that is to be expected.  I wait patiently, and finally I see the green bar of progress.  Just as the green bars come in the end, the screen goes black again for about 1 to 2 minutes.  Then suddenly the dreaded BSOD Blue Screen of Death comes with an error message saying that something has gone wrong and closing of windows, and he mentions something about Windows display drivers.  I'm not panicking yet, but is offered the possibility of recovering and I let the computer pick up normally, and I return to the screen of welcome with happiness and connect to.

  From the entrance, the first thing I see is a Windows Error Message, I opened and saved and here provide for our education and research.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8008E1D010
  BCP2: FFFFF88004EFFD88
  BCP3: 0000000000000000
  BCP4: 0000000000000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\021414-72946-01.dmp
  C:\Users\Owner\AppData\Local\Temp\WER-179057-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\System32\en-US\erofflps.txt

  * * * * *

  I'm not able to open the .dmp file to display as the file associations cannot establish a connection, and I am unable to find the AppData file under users.  Windows 7, it is extremely difficult find the files suggested by error messages.

  I would like to know why the BSOD appeared, then please explain the error message that came as I was trying to install a driver recommended for my computer using download driver acceptable practices, causing me concern and frustration, as well as the 4 years of intermittent to faithfully display failure.  I'm not sending the machine backwards.  There must be a solution.

  (Rabbit Trail - the suggestion to display the privacy statement is also an attempt to distract people to get a real fix and do believe that Windows 'help' you who isn't.)

  The laptop is running and I can see things on the screen.  It seems OK, but I'm going to face other issues?

  Thinkgal.

  VIDEO_TDR_FAILURE (116)
  Try to reset the display driver and recover from timeout failed.
  Arguments:
  Arg1: fffffa8008e1d010, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
  Arg2: fffff88004effd88, the pointer in the responsible device driver module (owner tag).
  Arg3: 0000000000000000, optional error (NTSTATUS) of the last operation code failed.
  Arg4: 0000000000000002, optional internal context dependent data.

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  atikmpag + bd88
  fffff880'04effd88 4883ec28 sub rsp, 28 h

  SYMBOL_NAME: atikmpag + bd88

  KD > lmvm atikmpag
  start end module name
  fffff880 '04ef4000 fffff880' 04f94000 atikmpag T (no symbol)
  Loaded symbol image file: atikmpag.sys
  Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
  Image name: atikmpag.sys
  Timestamp: Fri Dec 06 15:21:45 2013 (52A231D9)
  CheckSum: 0009FEFF
  ImageSize: 000 A 0000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Bug Check 0 x 116: VIDEO_TDR_ERROR

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263 (v = vs. 85) .aspx

  You are right that the accident may have been caused by the newly installed ATI driver. I checked on the HP Site and there is a version of the same display offered with the same output driver date on the ATI site, so the difference may be that the version of HP's specific system, while the ATI Version is just generic, so my suggestion would be to uninstall the ATI Version and replace it with the HP driver.

  Laptop HP ProBook 4520 s

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=4145326&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4053%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Driver ATI video and control panel (VERSION from HP)
  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4145326&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_93664_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  *********************************************************************************************************

  Drivers who have to update or delete.

  ArcSoftVCapture ArcSoftVCapture.sys Thu Dec 03 13:32:41 2009 (4B 180449)
  Driver Description: Magic - i Driver ArcSoft

  Driver update Site: Inc.
  --------------------------------------------------------------------------------------
  Impcd Impcd.sys Fri Feb 26 18:32:11 2010 (4B8859FB)

  Description of the driver: Intel® Turbo Boost technology driver

  Driver update Site: http://downloadcenter.intel.com/
  --------------------------------------------------------------------------------------
  PxHlpa64 PxHlpa64.sys Fri May 15 17:43:06 2009 (4A0DE1EA)

  Driver Description: Driver of Sonic CD/DVD (used by many different programs of CD/DVD)

  Driver update site: http://www.carrona.org/pxhelp20.html lists some of the programs it is used in.
  --------------------------------------------------------------------------------------
  RsvLock RsvLock.SYS Fri Oct 02 05:18:24 2009 (4AC5C560)
  Driver Description: McAfee SafeBoot Endpoint Protection driver

  Driver update site: http://www.mcafee.com/us/products/endpoint-protection/index.aspx
  --------------------------------------------------------------------------------------
  These drivers appear to be the remnants of a previous installation of a McAfee product. Please run the cleaning of Macafee utility to completely remove the remnants of MacAfee.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  SafeBoot SafeBoot.sys Fri Oct 02 05:18:05 2009 (4AC5C54D
  Driver Description: McAfee SafeBoot Endpoint Protection driver

  SbAlg SbAlg.sys Wed Nov 26 06:00:08 2008 (492D2C38)

  SbFsLock SbFsLock.sys Fri Oct 02 18:05:28 2009 (4AC5C564)

  --------------------------------------------------------------------------------------------------------------
  STREAM STREAM. SYS MON Jul 13 20:06:18 2009 (4A5BCBFA)
  No info?
  --------------------------------------------------------------------------------------------------------------
  stwrt64 stwrt64.sys Thu Sep 09 03:12:10 2010 (4C8888CA)

  Driver Description: SigmaTel Audio Driver

  Driver update Site: OEM - no to http://www.freescale.com/webapp/search/Serp.jsp?SelectedAsset=Downloads

  --------------------------------------------------------------------------------------------------------------

  
  
  --------------------------------------------------------------------------------------------------------------
  TuneUpUtilitiesDriver64 TuneUpUtilitiesDriver64.sys Fri may 25 06:28:19 2012 (4FBF5EC3)

  Please uninstall immediately. This program seems to do more harm than good to your system.

  Delete completely using Revo Uninstaller.

  REVO UNINSTALLER (FREE)
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  After uninstalling this program, open a command prompt and run the file system (CFS) Checker to verify the intergrity of your system files.

  Remove AVG and replace with Microsoft Security Essentials to see if some of your performance problems are resolved. If you decide that you don't see any remarkable improvement, you can always reinstall AVG.

  Utility to remove AVG.

  http://www.Avg.com/us-en/utilities

  Microsoft Security Essentials

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  If you decide to replace AVG and after completely removing TuneUpUtilities, run (SFC.exe) System File Checker tool to verify the integrity of your system files...

  How to run SFC.exe.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  You monitor the system and let us know if you have any other questions.

• HP probook 4520 s

  Dear Sir

  All of a sudden my cell phone was not able to read any memmorycard more. When I look in the devices section I see a sign, unknow device. I tried to reinstall the drivers (SP47066), says configurations that everything is installed succusfully but still does not have the card reader. Does not also restart.

  The fault has occurred when using the cardreade

  PS: my laptop is: HP probook 4520 s and is always during the term

  Kind regard

  Kristof B

  Hello

  Try this

  BIOS

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145198&prodNameId=4145326&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-98202-1

  Driver Realtek Media Card:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145198&prodNameId=4145326&swEnvOID=4059&swLang=13&taskId=135&swItem=ob-82903-1&mode=3