HP ProtectTools error checking to update

Similar Questions

• Software for updates error checking

  Software for updates error checking

  What should I do?

  There are several threads under microsoft support for update errors and also videos to youtube even try, based on the specific error you get. I had a similar experience yesterday and I had to use system restore.

  BR

• Satellite L750 - BIOS update failed with error check

  Hello

  Update the BIOS to the L750 failled with an ERROR "CHECK". I downloaded the update to the BIOS again and got the same error.

  I wanted to submit a support ticket to do support technical namely that the BIOS update does not work, but low and behold, the creator of support ticket does not accept my model number/number combination.

  Thus, apart from picking up the phone, how can I get a message to Toshiba?

  See you soon

  Hey Buddy,

  May I ask why you are trying to update the BIOS? Do you have questions?

  As you probably know updated BIOS is always somewhat risky because it rewrites the ROM module and if anything goes not the ROM module can be destroyed and you are not able to start the computer. So this update should be made only if you have problems with the computer, otherwise forget it please.

  Remember: never touch a running system! ;)

• Update error. Failed to check the updates. Event ID 1001

  Update error. Failed to check the updates. I rebooted the PC and the Windows Update service (it is activated and automatic when you restart).  Is there an event ID 1001 in the event log that shows when I try to run WinUpdate.

  Can anyone help solve this?

  Thank you.

  How to reset windows update components

  http://support.Microsoft.com/kb/971058

• Error code: 80070490 (Windows is unable to check the updates)

  I get the error code 80070490 (windows is unable to check the updates) I did a system restore, full scan, virus, malware, rootkit, adware and spy ware.  Downloaded and installed the suggested fix for this issue on the microsoft site.  Nothing seems to help.  Any suggestions?

  Hello Pstrjohn,

  Thank you for your message.  You can also click HERE for more information about the Windows Update error Code: 80070490.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• error code 80070424 (unknown) error when checking for updates to Windows.

  Original title : Please help sir its very urgent! I just learned that Windows cannot check the updates.  "Error code 80070424 unknown error" appears when I try to check updates. In 'services', it is set to 'start '... What can I do? Please Sir reply soon...

  Please help sir its very urgent! I just learned that Windows cannot check the updates.  "Error code 80070424 unknown error" appears when I try to check updates. In 'services', it is set to 'start '... What can I do? Please Sir reply soon...

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002/

  or

  You can not turn on automatic updates on a Windows XP Service Pack 2 (Service Pack 3) computer
  http://support.Microsoft.com/kb/916261

  or

  Click Start, select run, type: regsvr32 c:\windows\system32\wuaueng.dll
  Click OK
  (Works for Vista)

  You may need to restart. No guarantee. TaurArian [MVP] 2005-2010 - Update Services

• "Windows cannot check for updates" error Code 80080005.

  I have Vista Home Premium, Dell Dimension XPS 410.

  When Windows tries to automatically check the update of Windows, I get a message saying, ' Windows cannot check for updates.

  Error code 80080005.

  Can any ideas on how I fix? I've had this problem for over 3 months now and cannot find information on Microsoft Support Website.

  Thank you

  JA

  Hello drjoe_anzaldua,

  Thanks for posting on the Microsoft Answers forum.

  Usually the "Windows is unable to Check For Updates" error message produced always of the blocker window update connection attempt.

  1. first of all, please check that there is no any third-party firewall preventing Windows Update to communicate with "update.microsoft.com.

  2. check if Windows Firewall is blocking the update of Windows.

  Please see the following article for connection errors:

  http://support.Microsoft.com/kb/836941

  836941. you may encounter temporary connection errors when you use Windows Update or Microsoft Update to install updates

  After following the steps of troubleshooting in the article, if you still get an error message, thanks for posting again so that we can help you.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• an error occurred when checking for updates.

  error occurred is all I ever get when I use the Help toolbar selection, "check for updates".

  Hello
   
  1. do you have specific error codes with the message?
  
  2. are you referring to the Windows updates?
   
  Follow the steps and check if that helps.
   
  Step 1:
   
  Troubleshooting of Windows update run and check if this is useful.
   
  Step 2:
   
  There are many reasons where the windows updates to date do not settle, most of it is caused by security software.
  Temporarily disable any security software and then try to install the update, follow the steps mentioned below
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
  
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows cannot check the updates - C800044E error code

  Hello

  Since yesterday, I get a notification icon in the taskbar indicating that windows cannot check the updates. If I click on the icon and then click on the button "check for updates" in the new window, the search end reports that an error has occurred and the error code is C800044E. This happens every time after the computer starts and when I try to manually check for updates.

  The operating system is Windows Vista Home Premium 32 bit with OEM license.

  I already googled for this error code, but none of the suggestions found during the search worked. Mode by default with no results, I installed the MicrosoftFixit50202 (have not tried yet aggressive mode). I ran the malware Microsoft Windows (without threats found) removal tool. I downloaded and installed manually the KB947821 update for vista, also without results.

  The last successful update is dated more than a month previously, and I assume that at the same time, some important updates may appear. Can someone help me with this problem?

  I've already solved the problem by using the system restore (I used a restore enjoyed a week point).

  I'll answer your questions anyway, in which case this may help solve one similar problem to others:

  1 Vista SP2 (all updates important/critical installed as of October 1, 2010)

  2. Eset NOD32 antivirus/antispyware with current subscription. No third-party firewall (just the windows firewall).

  3-4. I have never installed a Norton or McAfee application on this computer, but I'm not sure if a trial version of Norton AV is pre-installed with this computer (if it did, I removed it when I originally set up the computer - almost 3 years ago).

• Vista - Error Code: 0 X 80070426 (impossible to check the updates)

  I have a Dell Inspiron 1400 with Windows Vista. When I am invited to the 'check for updates now' I get a message saying "error found: Code 0 x 80070426"

  Along with this, when I click on Control Panel, it appears for about 5 seconds then goes off and won't open unless in safe mode. I also have an HP printer and when the error message started works do not, the printer refused to print well, saying: "the default settings must be reset."

  Help, please!

  -haley

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  See problem control panel: http://support.microsoft.com/kb/936686/en-us 
  Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center, or games in Windows Vista

  For printer: http://windows.microsoft.com/en-AU/windows/help/printer-problems-in-windows

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• An error occurred during the update error checking new Code 80072EFE

  An error occurred during the update error checking new Code 80072EFE

  error 80072EFE infected by a root

  Launch tdsskiller to find any rootkids, download and run from here

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe

  your computer will restart automatelly and start up. Then run the updates.

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• I have windows vista sp2. Windows cannot check the updates. error 80070490 KB968389. last updated on this error 23/10/09

  Windows cannot check the updates. Error 80070490 failed since 10/23/09. Windows Update will not work.  I haves Windows Vista Home Premium SP2

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Windows cannot check for the error code 80070424 updates.

  I have windows vista premium x 64
  Windows Update stopped working and when I they do it manually it says windows cannot check for the error code 80070424 updates.
  I searched everywhere for an answer... Please help

  ----

• When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

  When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

  http://support.Microsoft.com/kb/946414

  «"Error when you download updates using Windows Update or Microsoft Update: 8000FFFF"»

  Follow the information given in the above link to solve your problem.

  See you soon. Mick Murphy - Microsoft partner