Satellite L750 - BIOS update failed with error check

Similar Questions

• 3065dx dv7 - Win7 - BIOS update fail with cannot check the platform ID

  I have a 3065dx DV7 - Win7 Home Premium currently on bios F13. I downloaded sp55068 to update the BIOS and it continues with:

  Warning cannot check the platform ID

  Hello

  Version F.13 is the latest and stable version only the BIOS for your device.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4041777#N1110

  sp55068 is not specific to your unit, which is the reason why you get the error

• Windows Update fails with error [error number: 0x800A0007]-which is not listed

  Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

  The other post:

  Thank you for your reply - but the problem persists - this is mopre complete info.
  The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
  Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
  As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
  Also your "Mr Fixit" was performed several times, but nothing changes.
  Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
  This is what is happening in the process of updating before it fails:
  Keep your computer up-to-date
  Check to see if you need updates for Windows, your programs, your hardware or your devices.

  Get updates of high priority (recommended)
  Select among the priority and optional updates for Windows and other programs

  ... and it does not matter if I say "express" or "custom" - headed then:

  Checking for updates for your computer...

  but fails after a few seconds with the same message as follows:

  [Error number: 0x800A0007]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  -However, it is the State of the system for more complete information for you:
   
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  MISCHU06BLUE system name
  System manufacturer Compaq Presario 061
  ED865AA - ABA SR1610NX NA540 system model
  System Type X 86-based PC
  Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MISCHU06BLUE\Compaq_Owner user name
  Time zone Pacific Daylight Time
  Total physical memory 1 024,00 MB
  Available physical memory 468,50 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.51 GB
  Paging file C:\pagefile.sys

  Please get us some help to solve this problem.
  What else can I provide?

  I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

  [This applies to your recent 'me, too' answer to another thread.]

• Update fails with error code 48 9.

  Original title: code9C48

  I get this update failed with... 9 ethical c 48... any information would be greatly appreciated... Thank you

  Hi TeresaReynolds,

  ·         Update fails with error code 9 48?

  ·         Are you facing this problem with a particular update or all updates?

  ·         Remember to make changes to the computer, after which the issue started?

  Try the following steps:

  Step 1:

  Temporarily disable the antivirus on the computer running software and check if it helps:

  Disable the anti-virus software

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset Windows components updates default and check to see if it helps:

  How to reset the Windows Update components?

  I hope this helps.

• kb953691and all updates fail with Error 8007000 b code

  I have a compaq presario pc sr5507f, all of the updates fail with Error 8007000 b code, when I start it up, he tells me that he don't find, msvcp71.dll, it will download internet 9 error code3715, it will be not to download microsoft lifecam 3.5 error, kb9953691, help help

  Hello

  You can check this link:

  Windows Update Error 8007000 b

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8007000b

• Update fails with error code 652 "WindowsUpdate_00000652" "WindowsUpdate_dt000" Is there a solution?

  Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688). UPDATE FAILS WITH ERROR 652, ENCOUNTERED AN UNKNOWN ERROR.

  Download size: 5.4 MB

  Update type: Important

  Jim,
  Take a look at this article and see if applies: Mike KB971187 - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista premium sp2 updates fail with error 80070643 dt000

  Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

  Hi Ruth,

  Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

  Method 1:

  You can perform the steps described in the article.

  You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
  http://support.Microsoft.com/default.aspx/KB/958052

  If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

  Note: If you have already completed the steps in this article, you can go to the next method.

  Method 2:
  

  You may need to restart the Office Source Engine (OSE) service

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information helps. Response with status so that we can help you.

• Inspiron 5749: BIOS update fails with the error 'Dell id does not match ".

  Hello

  I'm trying to update the BIOS of the Laptop Inspiron 5749. I downloaded the update file 3443A 07. EXE from Dell support website, where the update is supposed to be compatible with my system:

  -Dell Inspiron 3443/3543/5749 system BIOS;

  -Version A07.

  -Pull out the date 18 November 2015.

  I tried to install the update by using the utility to update the BIOS available in the start menu (after pressing F12). The update failed with the error message "Dell id does not match" or similar.

  Running the update of the session Windows don't seem to have any effect either.

  It seems that the update is only compatible with Inspiron 3443.

  Where can I get the update of the correct BIOS for my laptop? Any help is appreciated.

  The problem has been resolved by a motherboard replacement. Thank you.

• System analysis tool update fails with error 0x800704c7

  After having the problem that Windows Update crashes on 'check updates', I followed the recommendations on http://windows.microsoft.com/en-ca/windows7/what-is-the-system-update-readiness-tool, installed the preparation tool system update, but unfortunately after several hours, it failed with error 0x800704c7. What can I do now?

  I'm on a Toshiba PC with Windows 7 professional service Pack 1 32-bit.

  If looking for updates to hang on a current installation,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  You can try and install the latest client update manually let your update settings to never check for updates until you install it.

  https://support.Microsoft.com/en-us/KB/3138612

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• Automatic update fails with error #16824

  I just deployed a new version of my app and AutoUpdate updates fail with the dreaded #16824 error.

  

  However, I have not upgraded my SDK between releases, nor I have changed anything in my other than the version numbers update.xml. And the build and deploy process is automated, so that should not have changed either. What could be going on here?

  Old update.xml:

  <?xml version='1.0' encoding='UTF-8'?> 
   <update xmlns='http://ns.adobe.com/air/framework/update/description/1.0'> 
     <version>2.1.22</version> 
     <url>http://ramp.leancoder.com/client/downloads/ramp.air</url> 
  </update>
  

  New update.xml:

  <?xml version='1.0' encoding='UTF-8'?> 
   <update xmlns='http://ns.adobe.com/air/framework/update/description/1.0'> 
     <version>2.1.26</version> 
     <url>http://ramp.leancoder.com/client/downloads/ramp.air</url> 
  </update>
  

  The two versions were built with:

  $bin/adt -version
  adt version "2.0.2.12610"
  

  This error, in this case, is the result of a self-signed certificate has expired.

  Generate a new certificate and using the "adt - migrate" command (description here) solved the problem.

• Windows Update fails with Error 0x80072F76 on Windows 2003 server number

  I try to run windows update on my windows 2003 server. The update fails with number 0x80072F76 Errow. The Windows Firewall/Internet service Connection Sharing (ICS) is stopped and the security settings on IE is set by default. IE version is 8. The Windows Update screen is also not displayed correctly.

  You talk about servers, you use WSUS?

  Forum specific support by WSUS:
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

• Update fails with error 8007057

  Tried to update windows Vista with Vista Service pack 2.  Update failed with code 80070570

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Suggestion:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Brother MFC-7820N update fails with error 80070490

  Original title: Brother MFC-7820N failed update

  Apparently, I have to use the construct in Windows 8 pilots for the Brother MFC-7820n (connected via a network). I can print fine, but cannot scan. None of the drivers of brother works for the installation of the scanner. After talking with brother, they said I should use Windows Update to get the latest drivers. I tried this several times, but the update fails with 80070490. Any ideas?

  Original title: Brother MFC-7820N failed update

  Apparently, I have to use the construct in Windows 8 pilots for the Brother MFC-7820n (connected via a network). I can print fine, but cannot scan. None of the drivers of brother works for the installation of the scanner. After talking with brother, they said I should use Windows Update to get the latest drivers. I tried this several times, but the update fails with 80070490. Any ideas?

  According to brother Tech Support, brother does not support scanning or PC to Fax printers MFC (connected Ethernet) network.  Here is a direct quote to support Brother on 24/11/12:

  «Currently we have everything planned out a complete set of MFL Pro Suite software (Control Center, send/receive PC - Fax, etc.).» Scan of the MFC
  on a network connection is not supported by the built-in support to
  Windows 8 operating system. "

• Satellite L500 - BIOS update the 100 error code

  I downloaded "sln0v190.exe" (Phoenix WinPhlash 64) and extract to a folder and then choose to run the BIOS flash of routine.

  I get the following error:
  "Failed to retrieve information from the system bios.
  Block BCPSYS signature not found
  Error code - 100"

  As I can't read - and save - the old corrupt BIOS I can't Flash the BIOS again!

  Any ideas please?

  Hey Buddy,

  Update you the BIOS with the administrator account?
  Have you disabled the security software on your computer?
  Toshiba Value added Package is installed?
  What operating system do you use?

  But can I ask why you want to update the BIOS? Problems with the computer? If not I Don t do this update. As you know probably never touch a system running ;)

• KB2564958 and KB2567053 updates fail with error code 800b0100

  I get the error 800b0100 code.  Only security updates fail.  All other updates installed correctly.  I tried to update KB2564958 and KB2567053 for days.  I ran Hitman Pro, AVG, Malwarebytes and Spybot Search and Destroy to see if I had a bug that prevented the update with negative results.  I downloaded and ran patch KB941821 and it did not help.  Also tried Microsoft fixit.  I even ran a disk check that has been proposed in the Microsoft forums without success.

  http://support.Microsoft.com/kb/956702