HP psc 1350 more: printer hp psc 1350 more

Similar Questions

• PSC 1350 printer works but not scanner

  Hello

  Have just upgraded to Windows 7.  I have the printer psc 1350 to work & print documents.  I can not get the computer recognized or even to recognize the scanner function.  I have the installation discs and who have tried but still no scanner function.

  Site Web of HP said that the Windows 7 software should recognize the psc1350.  It recognizes the printer function but NOT the scanner function.

  Any ideas?

  Hello

  Open the program to Scan and Fax from Windows, and then follow the steps set out below, the steps for Windows 7 are identical:

  http://support.HP.com/us-en/document/c03511920

  Kind regards

  Shlomi

• PSC 1350 all prints a test page every time when turned on

  After changing the cartridge, we printed test page.

  Now, whenever we turn on the printer it prints test page automatically.

  How to disable this option?

  Thank you

  Hello vancat,

  If your problem is that your PSC 1350 prints a test page when it is turned on or after every printjob, it is very likely because the cartridge alignment process is not finished. After you have installed a new cartridge in the printer, it will print an alignment page. You must take this page and place it on the scanner glass (make sure that the top of the page is in a good way), then you press the "Scan" button on the printer itself. It will scan the page (that is, read the page) and full alignment process (so it is not scanning in the sense that it sends an image to the computer).

  I hope that clarifies the process of alignment slightly.

• Why an I get the test page yellow and black with each print job. I have a HP PSC 1350

  Why an I get the test page yellow and black with each print job? I have a HP PSC 1350

  Hi - I assume that the page that you see printed is the alignment page.  This happens usually if the alignment process has not been made.  All you should have to do is take the printed alignment page and place it face down on the scan scanner glass and press.  Who must complete the alignment process and eliminate the page printing every time.  If you have problems, try following the procedure described in this document.

  Hope that helps.

• 1350 HP PSC only prints blank pages

  My psc 1350 shows only blank pages even if it displays the print icon and when I opened the icon it shows that it is printing. When it does not print it is a blank page

  Finally found the 1350 had spent its time. Had an unused here and he hung up and seems to work ok now!

• Printer. HP psc 1350 all - in - one.

  I bought a new laptop but cannot find the driver for the hp psc 1350 all - in - one printer. I even bought software for the driver online, but still no luck.

  Help, please.

  Hi Gem20,

  Have you tried to download the driver from the HP website? Try HERE.

  Also, make sure that you select the operating system in the drop down menu to your laptop. To check what operating system, you must follow THESE instructions.

  Good luck, I hope it works.

  KidA

• my default printer is an hp psc 1350 but shows offline

  Hi I have a sony laptop with windows 7 and used the old hp psc 1350 8 months without problem, but now it is showing offline.  I checked all the cables are properly connected, switching off all without success.

  Hi BarbWilliams,

  ·          Did you the latest changes on the computer?

  Check out the link below on the HP site and check if it helps.

  "Printer is off-line" Message appears on the computer and the HP software does not print

• How to change the settings for color for HP PSC 1350 all-in-one printer

  HP psc 1350

  I have a printer psc 1350 HP for my windows vista. I just bought two ink cartridges and the black writing all go faded. How can I change the color settings, so it comes out better?

  I have a printer psc 1350 HP for my windows vista. I just bought two ink cartridges and
  Black writing all going faded. How can I change the color settings, so it comes out better?

  ================================
  Sounds like a bad printer cartridge or possibly a
  ... have printer problem you checked with the help of HP?

  Examples of documents Support HP:

  Colors on the Copies are incorrect
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00712305&cc=us&LC=en&DLC=en&product=306888&tmp_track_link=ot_search

  Solving print quality problems
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bpu04822&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN#N388

  I was wondering are these reloaded cartridges? I tried
  in my old model HP and it still wouldn't print.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• PSC 1350 prints a page of test every time he gets on' "

  PSC 1350 father prints a test page whenever he gets on' ', waste of paper and ink, and it drives me crazy whenever I come to visit!  Is there a way to disable this feature?

  It is currently under Vista Home premium on an HP desktop computer, but I think he has had the same problem when using XP on an old computer.

  The 'test page' has "to get the best quality, follow the steps using this sheet" printed in English in the top left of the page and printed in 8 other languages. Below is a series of three stages of instruction photos, one-third is a finger pressing a black button at the bottom of the row of buttons.  The rest of the page, about 2/3 of the page, is a series of black, grey and yellow lines.

  After printing the map must be loaded into the scanner and you press the button as shown on the sheet to complete the alignment process.  When the alignment is complete, it will not print another page of alignment until the next time that a cartridge is replaced.

• Unable to print on hp psc 1350 all-in-one of imac (os 10.6.8) but capable of scanning

  Unable to print on HP psc 1350 all-in-one of iMac (OS 10.6.8) but capable of scanning; also able to print other printers connected to the same computer.  The printer is connected directly via the USB port and I downloaded and installed software for printing on Mac using OS 10.6.  Shows the impression that labour is on hold whatever program originating the print job.  The State of the 'mistake' poster print job, but there is no information about error numbers or other details of the error. The correct printer is selected by default and layout is correct.  The printer has been disconnected, turned off and restarted and the computer has been restarted several times.  Able to print/scan/to 1350 PSC all-in-one of older Mac laptop (OS 10.5.8).

  Additional suggestions are sincerely appreciated.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Problems to install my printer all in one HP PSC 1350 to Yosemite mac 10.10.2

  I can't seem to install my printer all in one HP PSC 1350 Yosemite 10.10.2 Mac

  Choose my printer in the window 'Add' and 'Add' is disabled, and I get a message saying something like "there is not any software avaible for this printer." "Get in touch with the manufacturer of. But I can see this list,

  http://support.HP.com/us-en/document/c04473034

  so, I know it's true, the software he's somewhere.

  Help please.

  Thank you very much

  Hi @Nattaka

  I can help you use your PSC 1350 with your Mac running Yosemite.

  Please first reboot the Mac and printer, then download and install the HP printer drivers.

  You can now go ahead and add the printer. Please let me know if that fixes the problem, thanks.

• 1350 PSC all-in-one printer will not print

  I have a PSC 1350 which do not print.  The flashes check print cartridge and display Copies E line.  How can I fix my printer?

  You will need to follow the steps for the following scenario:

  On RESUME light: on
  Check paper light: Off
  Check the black print cartridge light: flashing
  Light black start copy: on
  Light to launch color copy: on

  The presence of a E, however, does not affect the meaning of the blinking lights and can be ignored for troubleshooting purposes.

• PSC 1350 printer all-in-one: the "scan" button is grayed out.

  I'm looking for just a simple answer to this.

  My 1350 all-in-one (an old model by the way) has all of a sudden the "scan" button grayed out

  He shows me the overview of the analysis, but it does not scan.

  I used this computer and the printer together for many years.

  This isn't a device, just a regular connection.

  Frustrating.

  Hello

  Or select an area on the preview of the scan with the mouse or uncheck the custom size option and choose the required scan size, then you will be provided with the opportunity to complete the scan.

  Kind regards

  Shlomi

• I have a Compaq Presario SR5250NX with a PSC 1350 printer all-in-one. There are 12 programs listed.

  I would like to delete some of them.

  Improvement of customer experience

  8.0 customer Participation program

  HP Easy Setup - Frontend

  HP depending on the imaging device. 8.0

  8.0 HP OCR software.

  HP Photo Creations

  HP Photosmart ERssential

  HP Photosmart Essential 2.01

  HP Photosmart, Officejet, PSC & eskjet all-in-one driver Software 8.0

  HP Product Detection

  HP Solution Center

  HP UpIdate

  I have Windows Vista.   Have tried to remove the center of solution before.  Always says it could damage other programs.  So don't do it.

  Hello louielou581.  I understand that you're curious what applications you can safely remove.

  I suggest that you keep HP Imaging Device function (it is your scanner), HP's OCR software (it's also for scanning), Deskjet, Officejet, PSC, and HP Photosmart All-in-one-softwware, HP, HP Product Detection and update HP Solution Center.

  The rest of the software should not be required and you should be able to remove it safely.  If you have any questions about the specifics of the software please do not hesitate to ask.

  If you find this useful or mean please make sure you click on the White Star under my name to give me congratulations.  I really appreciate it!

  Have a great weekend!

• HP psc 1350 &amp; Windows 7 64 bit. The drivers are installed, but when I try to print...

  I've deleted and reinstalled several times.  I've done that it is connected to the internet, etc.  I even watched the progress of the drivers being installed.  And nothing.

  The scanner works perfectly, is not the cable.  I tried all the HP diagnostic tools who say there is nothing wrong, checked for new drivers.  He drives me crazy now!  Can anyone suggest that a last resort solutions please?

  Thank you

  VB

  -Office 2010

  -AVG internet Security 2012 (I test to see if the firewall was causing a problem)

  I (literally) dusted off our old computer and tried the printer.  Similar problem, despite all the old drivers are always there.

  Due to the backlog of work at home of my son, we have admitted his defeat and bought a new printer. And we had the same type of problem.  Further research on the internet, which suggests to restart the print spooler in Services.msc and finally we managed to print something!

  Thank you for your help.