Why an I get the test page yellow and black with each print job. I have a HP PSC 1350

Similar Questions

• Why am I getting the message - sorry theres a problem with hotmail right now - when I try to open hotmail

  When I try to open my hotmail page, I get the following message - sorry theres a problem with hotmail now - why this phenomenon occur?

  Hotmail support:

  http://windowslivehelp.com/product.aspx?ProductID=1>

  UTC/GMT is 11:06 on Wednesday, February 15, 2012

• Why do I get the error message: NO. CHM with error 2: when you connect windows 7

  My husband clicked on a video from Break.com and after 3 seconds, the screen started jumping and making a static noise then shut down.  It restarts, but we ended up getting a blue screen which eventually do a windows repair, System Restore... etc.  Later, thinking it was a virus, I was able to do a scan, but it did not help.  I took the computer to someone else who tried a few things, anti-virus, one of them, but no virus has shown.    I was trying to get out of fashion "sleep" after using it successfully for months to happen, and you have disabled since this mode.  Now it's blindly for the computer to boot.  I'm not a techie or computer wiz, but I need to know what I can do.  I have an Acer Aspire with Windows 7 64 bit.  Now, when I log in I also get the error message. CHM with error 2:

  Thank you

  Hello

  I suggest you use the scanner online and check if it helps. To do so follow the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 1:

  Check the event viewer for the defective program or application that is the source of the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Method 2:

  I suggest to start in safe mode and check if the problem persists. To do so follow the link below:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 1:

  You can also put your computer to boot and check for the issue:

  http://support.Microsoft.com/kb/929135

• I'm trouble getting the automatic page numbering and TOC to play nice.

  Hello

  I use Indesign CC 2014.

  I created a book, consisting of several separate Indesign documents. The page number for the majority of the documents resets to 1, even though the settings are correctly defined:

  

  The screenshot above shows the second document in the book. The page numbers in the document are properly leaving page 13, as long as the previous document finished at 12.

  But see how the book file shows the numbers restart from 1. And they do the same thing on the table of contents:

  

  Here are the numbers .indb option settings:

  

  I think I have these configured correctly, and yet the book file shows each page 1 reset.

  All the documents have the same exact Document number Options, as I showed earlier.

  I even tried to create a file of book .indb nine, but the problem remains.

  I sent the .idml the version files to a friend who has Indesign cs5, and she said they were numbered everything correctly on the two real pages and in the table of contents - she had absolutely no problem on its version. So there must be another parameter/overide/bug on my system that causes this problem.

  I'd love help on how to fix this please.

  Thank you

  Glynne

  Problem solved!

  I came across this post (Re: automatic numbering does not work in the files of the book of) and the fix was: preferences-> General-> Page numbers and put it in the Section numbering. I had already been advised to have as absolute numbering, but once I changed it, the problem is resolved.

• I get the same messages code and error with Windows Mail for a week that the person in the previous announcement.

  It seemed to have started running last week when we had a huge update of Windows.  Windows Mail does not connect to the top through our wireless network.  He tries to go through several dial-up non-existent.  It is not a problem with my server.  I checked with them.  I tried to pass even if Windows Mail, with tools, through accounts, properties.  Once I get in the window with about 8 tabs on it, I can't get into any tab, except that might do me some good.  When I click on the Connections tab, my computer hangs in Windows Mail, and I leave Windows Mail.  Is there another way to get into Windows Mail to set the connection to Windows Mail?  Is there a way to get my computer to get the network wireless set up as the connection by default because the way he is now, he won't put the connection wireless as the default connection, even if I'm signed up to this time.  It's a problem that has arisen recently and it is extremely annoying.

  Try to compact and repair the database first (see www.oehelp.com/WMUtil/) to rule out the possibility that it is a question of database.

  Then go to tools | Options | Connection and see if you can set the correct connection there.  Then go to tools | Accounts | Add | Post and add another copy of your e-mail account with the correct settings.  Before you download messages, go to tools | Accounts | Mail | The original properties and uncheck the include account when sending and receiving.  Then check mail on the new account you set up and see if it works.  If so, you can delete the old account.

  If it is still a question, then see point 3 here: www.oehelp.com/OETips.aspx#3 to exclude interference antivirus and see point 15 on this page for updates which could have done (nothing to do with your problem).

  Steve

• How to close the parent page popup and refreshment with click of a button.

  With Aped 4.0, I created a window close popup with this process, I am able to close the popup window after submit. But how do I update the parent page before you close the pop-up window.

  He does ' t work like this, because above JavaScript three calls does not wait for the actions to perform
  Means once the function of the saveChanges method is called, it will run funtions all three with waiting for the first action to perform. This is not the right way.

  Instead, you can use a branch of the page with the guy like branch of PL/SQL procedure with the following code.

  And Point branch: on submit: calculation of before (before the calculation, Validation and treatment)

  Begin
  htp.p('');
  end;
  

• Why am I getting the same update again and again and again

  Why you continue to send me updates to install internet exp 9 when I have already installed and that you sent me the same update 8 times so far

  Hello

  It's not Microsoft '

  These are public forums, only led by Microsoft

  You can right click on the IE9 update - UAC prompt - hide

• officejet1100 HP does not print the test page

  7 the window running. The machine is hp deskdjet 1100, unsupported except in compatible file. Installed compatible driver hp dj 1000. Screen printer. Been the pillar for the test page. tell it to print the test page, order goes into Lake. Printer does not print.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP - DeskJet 1100 c - there is no Windows 7 drivers so check with HP
  Support and their forums to see if there are work-a-rounds.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=14499&TaskID=135&prodTypeId=18972&prodSeriesId=25525&lang=en&cc=us

  HP - DeskJet 1100 - support
  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25525&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• C4750 only prints the test page for office

  My C4750 has just stopped printing from my office and now only prints a test page.  It has been configured to print wireless and my laptop is still able to print anything there.  The printer is now connected via USB and is still the only thing I can print a test page.  MS Office said that no printer is installed.  Firefox said an "unknown print error has occurred" and Chrome says "no printer is installed.  I've disabled the antivirus and tried to reinstall and still nothing.  If I try to install via the packaged HP Installer happens to expire on the first step of"control systems".  I had to manually extract the package and are pointing to the correct drivers.  There is nothing wrong (no yellow triangles) according to the properties of the printer.  This has happened in the past, and the only way to remedy this is to format the hard drive and reinstall the OS.  Everything works very well since mid-December when I've upgraded to an SSD and did a fresh install.  Yesterday my printing problems are back.  No third-party programs have been installed, and only Windows updates it has installed have been updated to Windows Defender.  I tried to re - download the HP install thought package he was corrupt and still not bring anywhere.  My desktop is Windows 7 64-bit.  Any ideas?

  After another full weekend, trying to get this to work, I still have nothing.  Game over HP.  Get the best driver support and pay attention to the outcrys of your customers.  Apparently I'm not the only one with this problem and HP could care less.  I personally will move to the Dell products here on out.  Our Dell servers at work have been nothing less than phenomenal, and Dell customer service is blowing HP.  I'm glad that this problem happened before we have replaced 200 aging computers.  HP may be cheaper, but it is not worth the headache.

• Cannot get the home page of firefox on my computer

  I get the start page. I want to be my firefox home page

  This is the home page of mozilla firefox 3.6 version

  http://www.Google.com.my/Firefox?client=Firefox-a & rls = org.mozilla:-org.mozilla

  Simply go to options. And the link above as your homepage. Firefox 4 does not show this page. I have no idea why.

• DeskJet D2360: Deskjet 2360 - prints wrong colors, even if the test page seems well

  In 10 (64-bit) Windows, Deskjet D2360 prints the well test page, but the colors aren't any application (documents, photos...). Cyan looks like dark blue. Green also appears dark blue. I just updated the drivers from the HP website, but the behavior remains the same.

  The problem appeared after Windows 10 updates (January 2016 and later versions).

  Print and Scan Doctor couldn't fix it. Help!

  (Suggestion: If your printer prints the test page, why not propose an image file with what the test is supposed to look like.) This is useful especially to confirm colors. If I have a print test and see a few squares of color, how could I know if they are the correct colors?)

  After a long period of frustration, I found the non-professional magic solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/printer-prints-wrong-colors-after-Windows-10-update/TD-p/5242565/highlight/false/page/3

  Print a test page with HP print and Scan doctor. Once the problem is resolved.

• Why do I get the HP CUE scanning flow component has the work stoppage?

  Why do I get the HP CUE has stopped working message scanning flow component when I try to use the scan?  HP PSC 1610 ALL-IN-ONE printer-scanner-copier

  Hi smith6806,

  Try the procedure described below and then let me know if you are able to scan from Microsoft Paint or Windows Fax and Scan?

  Let me know what you find on your laptop?

  Follow the steps below to check the WIA Service:
  1. type services.msc in run or search and files program
  2. scroll the page up to the WIA Windows Image Acquisition
  3. make sure that the service is running. Click on stop and then restart to ensure
  4 restart the computer
  
  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake. This should solve your problem

• HP Photosmart C4795 of only printing blank pages - including the test page.

  I have a Macbook Pro IOS 10.7.5.

  WARNING - I have had this printer for about 2 years and it is literally never worked for me. I finally gave up and its been sitting in a closet. I really need to be able to print at home again this is why I'm asking now.

  I have tried all troubleshooting ideas given to me by the HP site and nothing works.

  The printer behaves like its printing but springs from the white pages, including the test page. I connect via a USB port, so I'll make sure that I had a strong connection. I have new black and color ink cartridges.

  Help, please!

  I would check the printer without connecting to a computer first.
  Do not copy work? If copy does not ink on paper, you can be dead cartridges or blocked. There is an option in the menu Tools 'cleaning print head', if that is not printed a page, the cartridges don't work.

• HP 5150: After each print job, I get a "printed in the test document. How to stop the test sheet?

  After each print job, I always get a 'test page print '.   I don't know how to stop printing. Any ideas?

  Hello

  ·         Using the HP Deskjet 5150 color inkjet printer or all-in-one printer, HP Photosmart C5150?

  ·         Were there recent changes made on the computer or the printer before the show?

  Follow the form of measures troubleshooting article and check if that helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  If the problem persists I suggest you contact HP support for help:

  http://WWW8.HP.com/us/en/support-drivers.html

• Could not print anything else than the test page.

  With the help of Windows XP 64-bit Edition Pro with 8 GB of memory. I have two printers on network I'm having difficulties with printing

  I cannot print from any products of MS Office, adobe reader/acrobat or something else and could not also do the print list preferences. I am able to print the page of test of all printers with Notepad, Microsoft Paint, and Microsoft WordPad cannot print. Printers are setup correctly, because I uninstalled the drivers completely, downloaded the drivers from the manufacturer and install them also and always the same story.

  I get the following error messages when I try to print the following applications from each.

  Microsoft Word 2002 SP3
  
  When you click Help on the Web, need me http://support.microsoft.com/kb/q223420/ which does not help to solve my problem

  When you click OK, I get...
  
  and do not help either and clicking on the Cancel button I get...

  
  by clicking on the names proposed Web takes me http://support.microsoft.com/kb/q223418/ that does not help either

  by clicking on the OK button simply closes the dialog box.

  In Microsoft Excel, when I click on the button to print in the toolbar, I get the following error.

  
  When I click on help, excel printing troubleshooting opens on the side of Excel 2002 SP3, and it helps not at all.

  Clicking OK closes the dialog box.

  I'd appreciate any help, and I don't want to reinstall XP since it is pain and I want to solve it without making, since there are so many thing so install.

  I hope that all the information I have given will help you to give me any suggestions to solve the problem here.

  Thank you

  It turned out to be Preo Printelligence, that has been installed by the COMPUTER to track printing resources. After retiring, everything was back to normal.

  I hope it helps someone