HP psc 2400 all in one printer does not print the size of the image that I take

Similar Questions

• Why, when I send an email using windows mail (RoadRunner ISP) sometimes it does not transmit the image that are in the original.

  Why, when I send an email using windows mail (RoadRunner ISP) sometimes it does not transmit the image that are in the original.

  Some messages are not complying with the standards of the Internet and the images do not show before their delivery.  You can overcome this by transmitting the message as an attachment instead, and then the images will be intact.

  Steve

• All-in-one software does not provide the option of wireless connection

  I have improved my all-in-one software on my HP laptop, but when he asked how to set up the connection, there is no option for a wireless connection. There were 2 options: usb cable and ethernet cable. I chose the ethernet cable, but it does not work. Prior to this level and even now, I can print to the wireless laptop, but I can't scan.

  My configuration is:

  OK, be sure to restart and do a Windows update after you HAVE uninstalled the HP software.  Then install from the link 'Support & drivers' at the top of this page.

• Windows RT and HP PSC 1510 all-in-One printer connection

  Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

  Hello

  I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

  http://support.HP.com/us-en/document/c03168175

  Kind regards

  Shlomi

• HP PSC 1510 all-in-one printer

  My OS is Windows 7.

  I tried to get this printer is installed.  Error messages ' print spooler does not "or" error in C:\program files analysis file (X86\HP\Digital imaging\bin\hpqscloc\103.xml "."). sevveral times it worked for a few pages after his farm and re-booting printer displays "printer troubleshooting."

  Hello

  Please contact the Microsoft Community Forums. I understand you when you try to install the printer you get an error message indicating the print spooler does not.

  Follow the steps for troubleshooting instructions.

  (1) how you try install the printer?

  (2) using a CD/DVD to install the printer?

  Follow the steps for troubleshooting instructions.

  Method 1:

  I suggest you to refer to a link.

  Diagnose and automatically fix problems printing and printer.

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I suggest you the link and download the drivers from the manufacturers Web site and are trying to install.

  HP PSC 1510 All - in - One Printer Drivers & Downloads.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=428800

  If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install

  Hello

  HP PSC 1317 all-in - One Printer driver Windows 7 64 bit does not.  I tried to install the driver after the incredibly long download (362 MB) to be told by windows that there is no driver.  I have uninstalled the software 3 times and reinstalled.  I unplugged, disconnected, re-downloaded and re-installed.  I downloaded the 64 bit vista drivers (they do not work).  I came to your site to seek support that is denied to me because the printer is out of warranty.  Unless, of course, I want to pay for it.  Which I did, after spending a considerable time (see above) trying to get it work on Windows 7.  Last thing to install on another machine, which I just do exactly the same result, and no sign of anyone else having the same problem everywhere.

  Now what can I do to get this printer to work?

  

  I solved this by using Windows update, which then installed a driver in the end.

  This was not a great experience.

  Why have a download for the version of 64-bit Windows 7 for this printer that puts all the other bloatware of HP but does not contain any driver.  Then you perform the update from Microsoft to get a signed HP driver?  Why can't the HP driver actually be content in the download presumed HP so you can Dodge all the crap software I just uninstall anyway.  A huge waste of time and effort.  Two weeks to solve a problem that should have been done in twenty minutes.

  Not good PR client on any level.

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• HP psc 1210 all-in-one printer: HP PC all-in-one printer

  Printing test page fine.  Prints the first page of the document very well.  After than that, each page becomes lighter and blurred until unreadable.  This "bad s.  Printer is several years old and has been the impression so far.

  Hello @bdr777,

  Welcome to the HP community!

  I hope you have a pleasant experience here.

  I would like to help with the discoloration print issue you have with your HP PSC 1210 all-in-one printer, when printing from your computer Windows 8.1.

  Could you try to make 3 copies of something on the printer for me? If the three pages of fine print, then we know that the problem is related to the software on your computer. If the pages are starting to fade and blur, then we know that the problem is probably with the printer cartridges.

  Are the cartridges you use genuine HP? Can you check the date of guarantee on them for me if they are? If they are relatively old cartridges, the nozzles down can be a bit clogged and start getting muddy upward while you print. (This is particularly likely if you use the printer very rarely).

  If copies are still faded and blurred, try these steps to clean the cartridges:

  1. Open the all-in-one with the power on and then remove the ink cartridges by slightly pressing the cartridge while pulling gently toward you.
  2. Inspect the ink cartridge ink nozzles and contacts for the accumulation of debris and ink.
  3. To clean build-up, dip a q-tip in distilled water (or water if distilled water is not available) and press the remaining water from the swab.
  4. While now the cartridge by the sides, as shown in Figure 3 below, gently wipe off any buildup of debris.
  5. Reinsert the ink cartridges and perform the alignment of ink cartridges.
  6. Print a test page to check the ink cartridges and rinse any remaining accumulation of the nozzles of the cartridges.

  

  -Source

  If the copies to print without any problem, try to download the HP printer installation wizard to make sure you have the latest drivers for your product.

  I hope this helps!

  Please reply to let me know if we have solved the problem.

  

• HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  Hello

  Please see the links to check ink levels.

  Check ink levels

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c00257147&tmp_task=prodinfoCategory&CC=US&DLC=en&LC=en&os=4132&Product=390315&sw_lang=

  How can I check my ink or toner levels?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

• first instance LR 6 cc import goes well with the various cards, that one card does not work, usb HDD with only images, map 9571 photos 115GB, sometimes only 300 photos, then wait all night nothing, try the separate subfolders, only two (including su subfo

  trial LR 6 cc import goes well with different cards, that one card does not work, usb HDD with only images, map 9571 115GB, sometimes only 300 photos pics, then wait all night nothing, try separate subfolders, only two subfoldrs(including subfolder) done well, 175, and 125 peaks, other subfolders doesnot work, opendLR as administrator : no difference. I7 import about 60-70%. on the import of only about 300 visible pictures, the other empty square. solution?

  Hi willemm,

  first instance LR 6 cc import goes well with different cards, that one card does not work.

  Could you please develop the issue you are facing?

  What is the image format you import?

  USB HARD drive with only images, card 9571 115GB, sometimes only 300 photos pics

  I would not recommend to import gb 115 library at once.

  Kind regards

  Assani

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!

• Windows Messaging does not mask the images in emails after installing ie9

  I have Windows Mail to block images in my emails, but that after the installation Internet Explorer9 windows mail does not block the images in my emails even if the parameters are always the same. I had to uninstall ie9 for this reason, except that ie9 seems to work. Vista Home Premium SP2.

  Stringy salvation,

  Try to upgrade to windows live mail 2011 and check if it works with IE9.
  Maybe just the problem of the software with Windows mail.

  http://explore.live.com/Windows-Live-Mail?OS=other

• Windows 7: the search does not find the files that should be, directory is indexed and *.php included on the list of extensions

  Windows 7: search does not find the files that should be. I have indexed directory and *.php included on the list of extensions, but search can't find files for Word searches that I know there are files with these words in them.

  If you're frustrated by research (aka Desktop Search), you are not alone. Click the Start button and type find and click the button 'change the way Windows search'. Now click on the Advanced button and select the tab file types scroll down and find your type of file (in your case .php) and make sure the radio button "index properties and the content of the file" is selected for the file type.

  Out the form by clicking on the OK button, but do not close the form when you click the Advanced button.

  Then, you may need to change the indexing locations. If the folder where your files are located is not known for indexing search, then search is not even bother looking for here (a source of frustration for many users). Maybe your files are located on another drive or partition without the knowledge of the indexing engine. Using the options icon and select/deselect expand, make sure that at least the files of interest are included for the indexed locations. I hope this helps.

  samc1

• The source does not contain the Image of HP recovery

  I am trying to create a bootable USB key with the HP recovery disk creation utility. After having moaned that my 8560w was working on battery power, and that he has no place on a USB stick formatted to FAT32 16 GB, I finished in the next screen that says ""source drive does not contain the Image of HP recovery " which is wrong: D partition is the main, contains the recovery disc." So what? Cannot create a recovery disk? Also note that I have no Recovery Manager (?) and F11 never worked (?). Decision of HP out of the PC business is probably the best thing that can happen to the customers.

  pher

  Hello

  See the link below:

  Creation of recovery disks or saving a recovery Image on a USB drive (Windows 7)

  Quote from this document:

  "Use a blank USB key with at least 32 GB of memory. HP recommends using a brand name of a manufacturer, to trust you. »

• Why the tool completely slice does NOT despite the fact that the layer is NOT locked, or 'Lock Slices' accidentally on is checked in the menu 'View' Illustrator CS6?

  Well want to can someone help pointing at me - why the tool cuts (for a simple in CS6 path) totally does NOT despite the fact that the layer is NOT locked, OR 'Lock Slices' accidentally on is checked in the menu 'View' Illustrator CS6?

  It is the slice tool you are trying. The only wrong.

  Use a knife or scissors.