HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install

Similar Questions

• Re - install a hp psc 1401 all-in-one for windows 7 64 bit

  does anyone know how to re - connect a hp psc 1401 all-in-one for windows 7 64 bit? This configuration worked flawlessly for several years now, but it has suddenly stopped working.  I discovered that this model is even more appears on the software and drivers HP site.  Peroxide of hydrogen used to have such excellent customer service, but now it's like this all-in-one is useless without the right software.

  Hello

  The HP PSC 1401 software can be obtained from the HP site.

  Here's the product page with the download of the software of your device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4063&product=1103491&sw_lang=

  Kind regards

  Shlomi

• Download the software to use for HP PSC 1600 all in one for Windows 7 64-bit full version

  HP P-7 1003 wb desktop, windows 7 64 bit. New computer.

  I want to use my HP PSC 1600 all-in-one printer, but the software disk is for XP.

  I see a complete solution software downloads and driver for XP and Vista only. Thought about trying to install the disc in compatibility and then update.  Would rather download it from the hp site. Can someone help me pin point one to use. Thank you!

  Hello

  Setup of full software functionality for Windows 7 can be downloaded from the page on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4062&product=390328&sw_lang=

  Kind regards

  DP - K

• PSC 1350 all-in-one: HP Director for PSC 1350 all-in-one - using Windows 10 (64-bit)

  Hello!  I recently had a new hard drive installed on my Samsung laptop year-and-a-half-year-old, as well as 10 (64-bit) Windows as well. Instead of using the original installation disc for my printer range all-in-one HP psc1350 (bought 1/2004), I have used your site and just did a download tonight HPPIW. EXE .  My question is: I do not see the original HP Director on the desktop now after the above file download. The copying, printing, scanning are all working well, if that's fine! So all the "Director" now wonder, if I can get in a way that - since the original my installation disc or HP support Web site? Thank you, CR-Issquah (26/08/2015, 21:00 - PT)

  Hello

  HP Director has been supported only for your printer up to Windows XP, since Windows Vista full features software is no longer available for your printer, and there is no HP Director application or provided HP solutions Center.

  You can follow the following document which lists no available workaround solution and the limitation of the provided solution:

  http://support.HP.com/us-en/document/c04740294

  Shlomi

• HP Photosmart C7280 all-in-One Printer Windows 7 64 bit automatic duplex printing

  I have a new laptop Dell, Windows 7 64 bit computer.  I am able to download my printer (which is connected wireless), but I can't get the automatic duplex printing function to work. I bought this particular printer precisely to be able to do automatic double-sided printing. The downloads that I have tried do not work for Windows 7 64-bit. What can I do else?

  Hey,.

  You should enable the option of automatic duplex printing:

   

  Go to control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  The accessory in Duplex face as installed two automatic and then click OK to save the change.

• Re: HP Officejet J4680 All in One Printer - Windows 7 64 bit

  I changed my wireless printer.  How to scan a document using my wireless printer.  I get a screen on my printer that says no 'connected to the computer.

  Hi, you can download the drivers and the software complete features on the site, if you have not already.
  http://goo.GL/BVOOg

  1 printer in the search box
  2. choose your operating system
  3. when he asked for the download, select FULL FEATURE SOFTWARE

  If you have the HP Solution Center already installed on your computer, you should not download the drivers.
  Click SCAN SETTINGS
  Select ENABLE SCANNING

• Stuck on "Checking system" during the installation of the driver. J4580 all-in - One Printer, Windows 8 64-bit

  Hi all

  I have no idea why it doesn't work. For always remains in stage "verification system. There is no bar of progression, just an of these in loop task bars, so I can't say if something is really installation. Does anyone have a solution for this?

  Thank you!

  Janek

  Hello again,

  I followed the steps and even once, it did not work. However, I found a solution

  I tried to install the software after I cleaned the temp folder and did a clean boot, but the same questions redoubled. I opened the Task Manager and I force closed "HP Installer re-install Plug In (32 bit). This caused an error that caused the installer to uninstall/delete anything on my computer. When I tried to install the software after that, it worked. Clearly there is something already on the system at the origin of a problem.

  Thanks again for your help!

  Janek

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Windows RT and HP PSC 1510 all-in-One printer connection

  Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

  Hello

  I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

  http://support.HP.com/us-en/document/c03168175

  Kind regards

  Shlomi

• HP psc 1210 all-in-one printer: HP PC all-in-one printer

  Printing test page fine.  Prints the first page of the document very well.  After than that, each page becomes lighter and blurred until unreadable.  This "bad s.  Printer is several years old and has been the impression so far.

  Hello @bdr777,

  Welcome to the HP community!

  I hope you have a pleasant experience here.

  I would like to help with the discoloration print issue you have with your HP PSC 1210 all-in-one printer, when printing from your computer Windows 8.1.

  Could you try to make 3 copies of something on the printer for me? If the three pages of fine print, then we know that the problem is related to the software on your computer. If the pages are starting to fade and blur, then we know that the problem is probably with the printer cartridges.

  Are the cartridges you use genuine HP? Can you check the date of guarantee on them for me if they are? If they are relatively old cartridges, the nozzles down can be a bit clogged and start getting muddy upward while you print. (This is particularly likely if you use the printer very rarely).

  If copies are still faded and blurred, try these steps to clean the cartridges:

  1. Open the all-in-one with the power on and then remove the ink cartridges by slightly pressing the cartridge while pulling gently toward you.
  2. Inspect the ink cartridge ink nozzles and contacts for the accumulation of debris and ink.
  3. To clean build-up, dip a q-tip in distilled water (or water if distilled water is not available) and press the remaining water from the swab.
  4. While now the cartridge by the sides, as shown in Figure 3 below, gently wipe off any buildup of debris.
  5. Reinsert the ink cartridges and perform the alignment of ink cartridges.
  6. Print a test page to check the ink cartridges and rinse any remaining accumulation of the nozzles of the cartridges.

  

  -Source

  If the copies to print without any problem, try to download the HP printer installation wizard to make sure you have the latest drivers for your product.

  I hope this helps!

  Please reply to let me know if we have solved the problem.

  

• HP PSC 1510 all-in-one printer

  My OS is Windows 7.

  I tried to get this printer is installed.  Error messages ' print spooler does not "or" error in C:\program files analysis file (X86\HP\Digital imaging\bin\hpqscloc\103.xml "."). sevveral times it worked for a few pages after his farm and re-booting printer displays "printer troubleshooting."

  Hello

  Please contact the Microsoft Community Forums. I understand you when you try to install the printer you get an error message indicating the print spooler does not.

  Follow the steps for troubleshooting instructions.

  (1) how you try install the printer?

  (2) using a CD/DVD to install the printer?

  Follow the steps for troubleshooting instructions.

  Method 1:

  I suggest you to refer to a link.

  Diagnose and automatically fix problems printing and printer.

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I suggest you the link and download the drivers from the manufacturers Web site and are trying to install.

  HP PSC 1510 All - in - One Printer Drivers & Downloads.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=428800

  If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• HP PSC 1410 all in one printer scanner does not work

  My printer, HP PSC 1410 all-in-one works fine as a printer, a scanner and a copier until I had a virus and had to reformat.  I have the original HP for the printer drive, downloaded the software undated and have loaded, deleted and reloaded the software 20 times.  The printer and copier works well.  Microsoft appears saying that scanner drivers are not certified, etc. and I can't scan to work.  I had put in hundreds of hours trying to get this to work.  I am 71 years old and I already have the computer work for my company 18 years ago.  My inability to solve this problem that bothers me more than anything else.  I need some young soul to help me that whip.  I don't buy a new computer or upgrade to Windows 7 until I fix this.  It has become a challenge, but I need help.  Kenny:

  Hi KennethPlaisance,
   
  Method 1: HP has created an update to update the driver to scan and fix the problem. Check if it helps you to fix the problem.
  For more information, see:
  The digitized files disappear after scanning with HP Solution Center
   
  Method 2: Use the diagnostic utility scan to fix the problem automatically.
  Visit this link to download the utility:
  "Scanning device could not be initialized" and related scanning errors display in Windows XP, Windows Vista and Mac OS X

• Need to download a driver for my HP psc 1205 all-in-one printer

  My HP psc 1205 all-in-one started to play up.   It takes forever (if there is one) to get a page to print.  I end up having to go to services.msc, select "Spooler" and then "restart".  It is said that said in the Description column "files charges to memory for later printing.  I want to just print a page.  I can't find my original disk to restore the printer.  I have check the print queue is empty (no file waiting to be printed).  When I master and P to print the report says 'Idle '.  What can I do to get to normal printing.

  The printer goes back to late 2003. Driver for Windows 7 support and beyond, it is everything that Windows Update has and that's going to be the absolute essential only.

  See here... http://support.HP.com/GB-en/search?q=HP%20psc%201205&filter=-1

  You'd want to consider purchasing a newer model which seeps pilot full support of its manufacturer... :-)

• PSC 1610 all-in-one printer: PSC 1610 will not print

  HP PSC 1610 all-in-one

  No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

  Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.