HP Sectre XT Pro Windows question 8 USB 3.0

Similar Questions

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Windows 8 pro upgrade - question about relocation

  I am running Windows 8 (Standard Edition) - it came preinstalled on my computer, and thus the product key is stored on my BIOS.

  I would like to be running Windows 8 Pro. However before I have to spend $200, I want to know exactly how the upgrade system - the rest of the internet is very clear on that. I have the following questions:

  (1) if I buy an upgrade Windows 8 Pro on the Microsoft Store (search > add features > purchase online product key), and then later I want to do a clean reinstall Windows pro 8, if I can install Windows 8 Pro or what I need to install Windows 8 and then go again?

  (2) if I have to upgrade again can I use the option 'I already have a product key' in 'Add features' and use the product key that I bought?

  (3) if I go out to a retailer and buy Windows 8 Pro and do a clean install, it will install in Windows 8 Pro or I have to use "add features"? If I have to use 'Add features', will be the product key that comes with my Windows 8 Pro that I bought work detailing if I select "I already have a product key?

  (4) if I want to upgrade to Windows Pro 8.1 in what order should I upgrade? Is - this Windows 8 > Windows 8 Pro > Windows 8.1 Pro or Windows 8 > 8.1 Windows > Windows Pro 8.1? (Please do not link me to the FAQ section, I've been there and that you can't find the answer. If you wish to make a reply in this section it otherwise I'll have to ask you to clarify rephrase please.)

  (5) is there a way I can save windows 8.1/Windows 8.1 Pro upgrade files so that I don't have to download again if I clean install my OS? If so, how do I.

  1. You need to install Windows 8 and upgrade to Pro again.
  2. Yes, you can of course. This code will work for you for ever. Just keep it somewhere safe (I keep all my OneNote product keys, but you can also store them as text files OneDrive or another course).
  3. The complete packaging product key will work as well.
  4. You cannot jump directly from Windows 8 > Windows Pro 8.1.  You would have either A) download the 8.1 update before you type the key Pro 8.1 or B) to obtain a Pro 8.0 and use it, then go to 8.1.
  5. There is really no files actually.  Each version of Windows has everything, the code is that it unlocks for use.  What is new, starting with Vista, this is why the "features add to Windows ' (formerly 'AnyTime Upgrade' is here.

     But you could always take your computer, update / update to 8.1 Pro you have, then do a system image backup, so you can always go to immediately exactly hassle-free.  Bonus, this backup can even include all of your installed programs, settings and customization.

• I've been using Lightroom 5.2 for about a year on a laptop Windows 7, general catalogue on a drive hard usb removable.  I now have a Surface Pro Windows 3 I want to edit photos on it too.  What should I do to get both devices using LR 5.2.  Not

  I've been using Lightroom 5.2 for about a year on a laptop Windows 7, general catalogue on a drive hard usb removable.  I now have a Surface Pro Windows 3 I want to edit photos on it too.  What should I do to get both devices using LR 5.2.  Note the tablet doesn't have a CD player.

  Also if you wish, you can also download a version update 5 LR:

  Install Photoshop Lightroom

  5.7.1, same serial key.

• Dv6-7229wm Windows 8 for Windows 7 no USB 3.0 supports

  I have a HP Envy dv6-7229wm. I have almost all my drivers installed and running, except on Windows 7 Pro SP1 64-bit.

  It is a system of AMD with the APU A10 - 4600M / 7660 G HD / 8 GB memory / replaced 750gig HDD 250gig DSS

  I have 4 x (3 x USB 3.0 Ports) USB Ports & (1 x USB 2.0 Port)

  USB 2.0 Port works great!

  USB 3.0 ports offering power, but no info is detected by Windows 7 Pro

  My mistake: (!) XHCI USB controller compatible host

  I need Windows 7 to work as 8 or 8.1 is not supported. Can HP if you please help me with this problem. I'm on 4 hours of research on just this issue and I'm stumped.

  Again, everything works fine and as you can see in the Device Manager the ony question is USB 3.0.

  Thanks in advance for the help. Let me know if any additional info is needed.

  Plug connection http://support.hp.com/us-en/document/c03497773

  

  

  Hello:

  Download and install the driver for AMD chipset on the link below. The first file listed.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• What is a Windows 8 certified USB flash drive?

  I just bought my 3rd USB flash drive in the hope of being able to copy my recovery image. My computer would not use the first two I tried all ports USB 4 - port 2.0 and 3.0. This time, I bought a HP flash drive who said that she supports Windows 8. I understand that I should not use a Windows 8 certified USB flash drive. Before I open this disc, I want to know if it's a. If so, I will return it not open - unlike the first two I tried.

  The States of package under requirements that Windows 8 is one of the necessary systems. For me, this does not mean that it is certified for Windows 8. Am I wrong?
  
  Computer: HP 500 - a60. 8.1 Windows (x 64)

  Hello

  Your question has not been answered by Erico on one of your other posts?

  If a piece of equipment is certified MS then it should be presented to MS for certification.  Some USB flash drives are marked on the package compatible with Windows 8, but this does not mean that the particular flash drive is "certified."

  There is to many, many USB flash drives that work with Windows 8. Some have argued that, if the USB flash drive as a 'removable' device, so it should work with the HP Recovery Media Creator.  However, I recently discovered that one of flash USB 2 (team F108 64 G) drives that I is not set up as a 'removable device' when you open my ThisPc (myPC) and it works perfectly for me.

• Is it possible to install Windows XP with USB / (Pendrives) with a CD?

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  Installation of Windows Xp from a usb key involves a lot more than simply copy the files from one windows on a USB disk. It is much more difficult than don't imagine most (but not impossible). I did it a few times. Read the instructions on the two links below. The first link below is your best bet. You are not likely to do things immediately. It's ok, we are here...

  Install Windows XP using USB Flash disk / Flash Drive - step-by-step Guide

  Install XP from USB - reboot.pro

• How can I backup my windows vista on USB?

  How can I backup my windows vista on USB?

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  If you try to use a USB Flash drive, which is not supported on Vista.

• Cannot install Windows 7 error USB "Setup could not create a new partition system.

  Windows 7 install gets o Acer Aspire 5100 hard (perhaps by EzBack Pro II)

  So the problem is that I want to install windows 7 (from USB, no more details coming soon), but it gives me the error "Setup could not create a new partitiojn system or locate a system partition. See thwesetup for more information log files".

  I flashed the bios because caouldn can't EzBackPro II freaking be uninstalled on vista.

  I formatted all partitions and have now 1 x 150 GB partition (still the partition OEM.. angyr I because recovery tools did not work ~. ~)

  now I want to install windows 7 and it does not just ;/

  any help? I hope that I destroy my laptop ;/

  Hi Grasmanek,

  You can try to dollow steps and check if it helps you to difficulty of installation of Windows 7 from a USB.

  (A) have no USB stick plugged in when the computer starts.

  (B) in the configuration page that says that you can load other drivers, insert the USB key, then click on the link and load drivers.

  (C) disconnect the USB.

  (D) to continue with the installation and check if it ends well.

   

  Access the links below and make sure you follow the steps mentioned in the items to install Windows 7 from a USB key.

  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-7-on-a-NetBook

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  * Original title: Windows 7 - CD to USB

  I bought Windows 7 (the two CD 32 & 64) many years for use on my early 2008 MacBook Pro, with an optical drive, via BootCamp. It worked very well.

  Now I have a new MacBook Pro without optical drive, but would like to install BootCamp and use Windows again.

  How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  Thanks in advance for your help.

  Use Rufus:

  Rufus - create USB bootable the easy way discs

  Another solution:

  http://www.AddictiveTips.com/Windows-tips/create-bootable-Windows-7-USB-flash-drive-from-DVD-disc/

• Sony dcr-hc35e Windows 7 by usb connection

  Is it possible to connect a sony dcr-hc35e to a computer running windows 7 via USB?

  I could do it on my old XP computer but when I plug it into my new Windows 7 computer, it does not recognize the camera.

  Please help, I have several hours of footage of my little girl to download.

  You will need to check with Sony to see if they have Windows 7 drivers for your camera because Windows 7 does not automatically detect it.

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver&SR=NAV:service_support:Electronics:drivers_software:ESUP & Ref = http % 3A % 2F % www.sony.com%2Findex.php 2F

  Or you can transfer your question in the Sony Forums.
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I don't find it on the Windows 7 Compatibility Center, but it can still be compatible.

  Thank you

  Marilyn

• What is the unit allocation size that is displayed in the window to format USB?

  Original title: allocation unit size

  What is the unit allocation size that is displayed in the window to format usb

  Hi Moaz,

  Thanks for posting your question in the Microsoft Community.

  I understand that you want to know the unit allocation size that is displayed in the format USB window. Correct me if I'm wrong.

  I will certainly help the question of fixing.

  In computer file systems, a cluster is the unit of allocation of disk space for files and directories. To reduce the load of the management of data on disk structures, the file system allocates no individual disk sectors, but contiguous groups of sectors, called clusters.

  On a disk that uses 512-byte sectors, a 512-byte cluster contains one sector, whereas a 4-Kibibyte (KiB) contains eight sectors.

  Refer to the below mentioned article and see if it provides information that you are looking for.

  By default for NTFS cluster size, FAT and exFAT:

  http://support.Microsoft.com/kb/140365

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port.

  Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port. I looked for the answers here and I can not find my problem even for questions answered with Dibcom TV Tunder device since I can't find this device in my laptop. He is able to install and operate in another laptop running Windows XP. Been tried to uninstall and reinstall more than 5 times and he continues to meet with even has no message and I even downloaded the latest drivers from the local Web of ISP site. Helpdesk of mcafee and contacted microsoft, but they are not able to solve my problem.

  Thank you.

  Managed to solve by referring to the answer below posted by Rudolph_DT asked on thread

  Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  Thank you.

• Problem installation of Acrobat Pro, windows

  I have an Acrobat Pro install question, previously to install Acrobat Pro (Creative cloud) for Windows, we had to use this command at the command prompt

  exceptionDeployer - workflow = install - mode = pre

  now it does not work (new year, new acrobat pro?) but if we change pre to post it seems to work. What is the fix?

  Thank you

  Hi MICHAEL CROUSE,

  DC Acrobat is installed using setup.exe through the command line (and not through the Exception Deployer tool) before you run the MSI CCP and if necessary for the deployment of other applications exception, run the Application deployer of Exception. For more information, please visit CC help | Deploying Adobe Acrobat

• Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hello Sajid,

  The community here is about the countries United States, Canada and Asia-Pacific. Your DCR-TRV356E model is a model British camcorder.

  However, to answer your question,.

  The DCR-TRV356E USB streaming function is not compatible with the operating system Windows Vista and Windows 7. You can connect the camcorder to the computer using the A / V cable connection or using an i.Link cable.

  You can visit the European Forums of suggestions regarding the transfer of videos to Windows Vista or Windows 7 computer.

  http://www.Sony.co.UK/discussions/community/en/support/cameras_and_camcorders

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.