Dv6-7229wm Windows 8 for Windows 7 no USB 3.0 supports

Similar Questions

• For HP ENVY dv6-7213nr Windows 7 USB controller

  Recently, I've killed my HP dv6-7213nr Windows 8.1 want to Windows 7 Professional.

  I tracked most of the drivers for it in various sites, but I still need USB controllers for her. The closest to the power cord works, but that's all.

  It's a USB 2.0 controller.  I looked everywhere I know online and found nothing on this subject.  Any help?  I have seen a lot of post on the decommissioning and the difficulties in finding different drivers, it's a pain.

  Thanks for any help in advance!

  Hardware IDS are as follows:

  PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C & REV_03
  PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C
  PCI\VEN_1022 & DEV_7812 & CC_0C0330
  PCI\VEN_1022 & DEV_7812 & CC_0C03

  USB 2.0 is supported by native drivers included in Windows 7. The hardware ID 'PCI\VEN_1022 & DEV_7812 & CC_0C03' you provide is an AMD USB 3.0 controller. Please try the Drivers of the Chipset AMD (USB 3.0, AHCI and Chipset) from AMD. The first driver is for Vista, 7 and 8.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• DV6-2018ax Original BIOS for Windows Vista 32 bit

  I tried for hours to find the original BIOS for DV6-2018AX (windows 32-bit vista) without success. I know that there is no update BIOS... I'm not interested, in that, just the bios it is out of the factory with. If someone could help me I would be very much appreciated. It is a USB flash... As I can't recover the BIOS by normal means. Thank you.

  All versions of BIOS for your model are shown here:

  http://h10025.www1.HP.com/ewfrf/WC/previousVersions?softwareitem=ob-83686-1&CC=US&DLC=en&LC=en&os=4063&Product=4059867&sw_lang=

• HP Pavilion dv6 3060em: HP Pavilion dv6 3060em Windows XP

  Hello! I can't find drivers for my laptop HP Pavilion dv6 3060em with Windows XP Pro. Help, please.

  Hello

  Thanks for posting in the Forum from HP Support.

  Here is the official site to download the drivers for your model-> http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us & lc = in & product = 4226935

  Your computer supports only Windows 7. It is the operating system that is supported.

  In fact, Windows 7 is a good choice considering this support of Win 7 Pro/Ultimate/Enterprise virtual XP, called XP Mode. Learn more about it here:

  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  http://www.howtogeek.com/HOWTO/10911/run-XP-mode-on-Windows-7-machines-without-hardware-virtualization/

  Please, let me know if you need help!

• Pavilion DV6-2140ED: Pavilion DV6: 10 Windows does not start after the upgrade memory (4 GB-> 8 GB)

  After I upgraded the RAM in my HP DV6 from 4 GB to 8 GB (2 x 4 GB Kingston KTA-MB1333 / 4G), Windows no longer starts. I get a blue screen and it keeps restarting.

  I think that the memory specifications are similar to the Samsung M471B5673EH1-CH9 original memory: Ghz 1333, non - ecc, 1.5 volts, case latency 9 etc.etc.

  It's a laptop DV6-2140ED HP with a processor Intel i5 - 430 m and Intel mobile chipset HM55.

  The bios detects 8 GB and it also passes the check/test of memory. As far as I know that I have also installed the latest bios firmware: F.1D. Reinstall my Windows 10 64 bit does not work either: with 8 GB I also get blue screens, after I try to boot my Windows 10 bootable USB drive.

  I read other people having the same problem, but I have not read a solution yet. What can we do about it?

  Hello:

  Please see this discussion.  You buy a very specific memory for any HP laptop with Mobile Intel 5 series chipset.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551/highlight/true#M207994

• HP Pavilion dv6-6c02ax Windows 7 drivers

  Hello

  I have a HP Pavilion dv6-6c02ax with a new installation of Windows 7 on it and a few devices that pilots are coming up as not found.

  They are as follows:

  BCM20702AO

  SM Bus controller

  (USB) Universal Serial Bus controller

  (USB) Universal Serial Bus controller

  Where can I find the drivers for these devices. USB would normally be covered by the chipset driver, but it's not on my support page products. When I used the utility to detect my drivers and update updated some said but now I have everything but I do not have.

  Can someone tell me please in the right direction?

  Thanks in advance

  Steve

  Hi, Steve:

  I don't understand why HP does not include the AMD chipset drivers for AMD laptops.

  Their products all based Intel have the drivers (chipset, USB 3.0, etc.), all on the laptop support and driver page.

  They gave you a real double-blow hard.  No driver chipset and no driver Broadcom Bluetooth!

  So, here are the drivers you need...

  First, install the AMD chipset driver and restart. This will install the SMBus Controller and USB 3.0 controllers.

  You want the first file listed.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Broadcom bluetooth driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103251-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• Problems with HP Simplepass 2011 - HP Pavilion dv6 Notebook Windows 7 64 bit

  HP Pavilion dv6 Notebook Windows 7 64 bit

  I have this laptop about two years. I had have to rely on the factory affecting several times on circumstances independent-(donjon de Norton Utilities supprimant les registres essentiels). But, recently, I restored to factory setting and updated my Norton Internet Security to the latest version and everything was fine until my fingersensor stop Saw several hours after. He reads is no longer my fingerprint.  I am prompted by the software to enter my password by typing only and not in the typing and scanning. Right now my quick launch is based on numbers from 0 to 9. Can someone guide me to recover my software working properly?

  You can try to uninstall the driver and the software for Simplepass, then re - install, refer to this guide

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-SimplePass-identity-protection-validity-fingerprint-and/m-p/742013

• By connecting to Window Vista is errro ' configuration data for this product is damaged contact the support staff.

  1. I get this error before moving on to the windows vista login ' configuration data for this product is damaged contact the support staff "I tried repairing the system by using the Windows disk installation and chkdsk/f/r and none of the steps helped.
  2. on a different vista machine it keeps restarting on before we get to the opening of windows session, I managed to make system repair using the windows disc and he managed to survive but, unfortunately, after a couple of stop and restart, the same problem happens again.

  Kindly help on how I can make these problems disappear.

  Hello

  Method 1: Check to see if you can boot into safe mode. If you can start in safe mode, you can perform the clean boot and test functionality.

  Step 1: Check the functionality of the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine, you can check if the problem exists in a clean boot state.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: If you are unable to boot into safe mode, try to Start the computer using the disk and recovery options, select command prompt, run System File Checker tool.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Download link for the tool (SFC.exe) System File Checker.

  http://support.Microsoft.com/kb/929833

  I hope this helps!

• I saved a downloaded version 10 Windows on a USB key. What I should download Windows 10 by 29 July in any case to get it for free or I can wait until Windows no longer supports 7?

  * Original title: Windows 10

  I saved a downloaded version 10 Windows on a USB on my laptop Windows 7 SP1 to change my laptop at 10 Windows at a later date. What I need to download Windows10 by 29 July in any case to get it for free, or can I wait that Windows can't stand 7 and then use USB to update my laptop?

  Yes, there actually upgrade your current installation before the 29th, which means the 28.

  Download means nothing.

• I get that for Windows Server 2003 is no longer supported the KBs on these issues do not have a correction action.

  I get that for Windows Server 2003 is no longer supported the KBs on these issues do not have a correction action. My network is disconnected, so the automatic update is not an option but I always receive as a vulnerability on the scans. How can I obtain the latest CRL to mitigate these vulnerabilities.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• I need help for my reader to USB drive on my windows 10 ACER?

  I need help for my reader to USB stick on my chrome windows 10 plug ins acer. Can you help me?

  What Adobe application that you use?

  This is the Adobe Media Encoder forum, and you did not mention anything on this subject. If you can let us know what Adobe application, you need help, we can help you make the right forum.

  Thank you

  Regalo

• I bought 13 PS elements and did not know that the Windows Vista operating system is not supported by this version.  How can I exchange the PS13 bought for a version of Photoshop that supports the Windows Vista operating system.

  I bought Photoshop elements 13 and did not know that the Windows Vista operating system is not supported.  How to exchange the 13 elements of Photoshop for a version of Photoshop that supports the Windows Vista operating system?

  Adobe does not sell older versions of their software, the best you could expect if the software will not work on Vista is to get a refund.

  Please see return, cancel or Exchange an order - Adobe

  http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• What is a Windows 8 certified USB flash drive?

  I just bought my 3rd USB flash drive in the hope of being able to copy my recovery image. My computer would not use the first two I tried all ports USB 4 - port 2.0 and 3.0. This time, I bought a HP flash drive who said that she supports Windows 8. I understand that I should not use a Windows 8 certified USB flash drive. Before I open this disc, I want to know if it's a. If so, I will return it not open - unlike the first two I tried.

  The States of package under requirements that Windows 8 is one of the necessary systems. For me, this does not mean that it is certified for Windows 8. Am I wrong?
  
  Computer: HP 500 - a60. 8.1 Windows (x 64)

  Hello

  Your question has not been answered by Erico on one of your other posts?

  If a piece of equipment is certified MS then it should be presented to MS for certification.  Some USB flash drives are marked on the package compatible with Windows 8, but this does not mean that the particular flash drive is "certified."

  There is to many, many USB flash drives that work with Windows 8. Some have argued that, if the USB flash drive as a 'removable' device, so it should work with the HP Recovery Media Creator.  However, I recently discovered that one of flash USB 2 (team F108 64 G) drives that I is not set up as a 'removable device' when you open my ThisPc (myPC) and it works perfectly for me.

• Z500 8.1 Windows 64-bit USB ports not working not

  Hi everyone, now I have bought a lenovo Z500. After update to 8.1 Windows 64 bit, USB flashdrives could not run properly eventually Explorer Windows did not. When I try to restart, it blocks on the screen "Restart" and I have to press and hold the power button to power unit off which is very dangerous for the laptop. Other usb devices work well as a drive external hard, mouse and keyboard. USB flash drive only have such a problem. When I insert my USB key, I hear the sound which indicates that a device has been inserted. It is not the usb flash drive, because I tried with different USB keys and the same thing happens. All USB keys works well on my desktop (Windows 7).

  Thank you..!!

  After you uninstall a software firewall, USB port, back to normal.

  Thank you.

• Aspire driver V3 - 772 G Windows 8.1 USB 3.0 problem

  Hi all

  I bought my V3 - 772G 1 months ago about.

  Yesterday everything worked well and today, I noticed that none of the 4 USB ports were working (laptop was suspended since yesterday)

  No USB not connected, nothing. Key/mouse USB/hard drives /... does not work.

  I noticed that in Device Manager, I had problems with the ' USB 3.0 eXtensible Host Controller Driver "that the driver was not loaded. I've seen people online saying to uninstall and restart the computer. That and once again no operation USB, Device Manager, the device with problems was now "Compliant Host Controller xHCI USB".

  I tried WITHOUT success to the following:

  -Downloaded ' USB 3.0 eXtensible Host Controller Driver "Intel has failed (available only for W7) - Web site

  -Restart windows full - same

  -Disconnecting the battery and power for a few minutes, restarted - even

  -Remove all USB devices (hubs and so forth), restarted - even

  -Uninstalled all updates of 2 days before (to the point that I know that it worked) - pilot months before change - same result dates

  -Tried to search the BIOS to disable USB3.0 and put 2.0 - not found

  -Tried to get back to another restore - point na not work, complained that the disc is maybe damaged

  -Widnows run chkdsk/r several times - no error found - nothing resolved

  -Run chkdsk/r - stuck at 16%, but I guess that needs all night (TODO) - solved anything

  -Tried to do a repair without losing files (using recovery partitions) - always guess how

  Any idea or any help? They just stop working. I plug laptop already with windows 8.1 and they worked for 1 month

  Thank you

  -UPDATE1-

  I used the command-line (via recovery windows at startup) and copied all the files from backup drive (I assume) X:\Windows\System32\Drivers\usb* on the local drive C:\Windows\System32\Drivers

  Rebooted - still nothing

  [Solved]

  Here's what you can try:

  (1) ensure that the ntbtlog.txt file located in C:\Windows it is removed (to clean the logs)

  (2) to activate the startup log check which driver loading fails:

  Option A:

  (1) open administrator command prompt

  (2) write "bcdedit/set {default} bootmenupolicy legacy" to allow the start of legacy with F8 (don't forget to change the settings after this guide)

  (3) reboot and press F8

  (4) select this option to start with active log

  Option B:

  1) press "WIN + R" and write "msconfig".

  (2) in the Startup tab, select the option "Startup journal."

  (3) to apply the changes and reboot (remember to change the settings after this guide)

  (3) check the drivers failed in the log (C:\Windows\ntbtlog.txt) file (in my case I got "ucx01000.sys" driver failure)

  (4) after researching online (Source) I saw the USB3.0 stack consists of 3 files of accommodation with the xHCI Host Controller: Usbhub3.sys, Ucx01000.sys and Usbxhci.sys.

  (5) restart the laptop and press 'ALT + F10' to enter in the menu ACER recovery

  (6) select "Troubleshooting", then "Advanced Options", then "Command Prompt"

  (7) you will be located in the "X:" drive and the folder "system32" of the recovery unit

  (8) write "cd drivers.

  (9) "copy write Usbhub3.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (10) "copy write Ucx01000.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (11) writing "copy Usbxhci.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer 'Yes')

  (12) write 'exit '.

  (13) restart your laptop, and you should be able to use USB again

  (14) disable the startup option if you used Option B.

  In my case, the "Ucx01000.sys" file was missing in the drivers folder.