HP touchsmart tx2 display at startup problems

Similar Questions

• Blue screen during installation of Windows XP on my Touchsmart TX2

  Hey guys.

  l am trying to install Windows XP on my new HP Touchsmart TX2, but the startup configuration every time l, the Tx2 stops with a blue screen when loading drivers. l tried with several discs, even those created with nLite and understood the SATA drivers, but nothing has worked.

  Does anyone else have this problem?

  Thank you

  Nightmare

  @Nightmare,

  You need to integrate your drivers Sata (only x 86 drivers) with nLite.

  Here are the Sata drivers for you. Just unRAR it drivers with Winrar. (This driver is different then what gave you Cheryl.)

  Here you will find the file .doc with guide how to integrate this with Windows XP Sata driver. (You will need to open the Microsoft Office).

  Here you will find the file with the same guide *.pdf . (You must open the Acrobat Reader software. Download link for this program here. Select your language and your system it.).

  Also, remember that you use at least version of WinXP SP2 . If you have not got the version SP2 here you can download this service pack and here you have a guide to how to integrate this with XP file written by nLite.

  In nLite, you can even burn your new XP CD with these changes.

  I hope this will solve your problem.

• HP TouchSmart tx2-1275dx crashes at startup.

  HP TouchSmart tx2-1275dx crashes on start up, black screen, numlock and capslock LED flashes slowly.  Win7 Ultimate.  First occurrence was fron sleep with closed lid, battery power.  After cold reset, the unit began normally, start Windows.  Then backup, complete analysis and calibration of the battery.  Ran on battery up to the stop.  Afterwards, will not start.  Unable to enter the BIOS.  Not leaving a bootable cd.

  1 remove and reinsert the hard drive.

  2. optical drive removed and reinserted.

  3 checked memory for solid mechanical installation.

  4. battery cmos checked was firmly inserted.

  Took to Best Buy geek.  After an attempt to start, he said motherboard was bad, and I have to buy a new computer.

  Can you help me?

  I think that the tx2, repeat a decline, if it continues to Flash, so it is LIKELY that the CPU is having problems.

• HP Touchsmart TX2 1270US reinstall Windows 7

  Hello

  I have a HP Touchsmart Tx2 I 1270US updated since Vista about six months ago. Quite recently, my laptop started to act up. Now it crashes when connecting (just before my password screen), I have to force close down. It freezes Explorer (that prevent me from throwing anything) and slowed down considerably. I would like to do a clean install and reinstall all my software from HP site. The two questions I have are,
  Can I reinstall Windows 7 with my upgrade disk? I really don't want to have to go back to Vista (Wait For hours while bloatware and the drivers are installed) and then attend re-setting level to Windows 7.
  The other issue I had is on auto rotation (it's a coincidence that it is). The screen rotates automatically to the opposite landscape when I convert it to a tablet. Does anyone know where is the driver or the file to do this? I don't see it on the HP support site.
  Also, I do not make an image of the system because of the space (or lack thereof) on my external hard drive (Excuses, excuses)... So I can't just restore.
  Thanks in advance!
  P.S. I found all the other drivers and files I think I need on the site of HP support (I hope so: O).

  To avoid having to phone activation, it would be better you really reinstall Windows Vista, and then repeat the upgrade. If you don't want...

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• iMac troubleshooting ADVANCED startup problem

  Hello. My iMac does not complete the boot process. It chime, then display the Apple logo.

  The progress bar will get about halfway, then disappears from the apple logo. Gray rest screen for about 2 minutes, then the computer shuts off and the process repeats. NOTE: the computer does NOT respond to the "safe" mode (shift key) or (command-R) disk utility commands. What else can I try?

  Start - computer restarts by itself-Yosemite

  Resolve startup problems-

  Resolve startup problems - (2)

  Resolve startup problems - (3)

• HP touchsmart tx2-1025dx pc

  Hi I have a Hp Touchsmart tx2-1025dx pc and he go and turn on the locking caps keeps blinking and the computer doesn't show anything on the screen, but all the lights are on and I hear the fan sometimes it works sometimes is not anyone can help with this

  Hi Hernandezerick2 and welcome to the Forums of HP!

  I understand that you have a problem getting your HP TouchSmart tx2-1025dx Notebook PC to turn on. I'll try my best to help you solve this problem.

  Here is a document for computer does not start and the lights blink or the computer will beep with information about what mean lights and beeps and how to fix it.

  I hope that this information help, please let me know how it goes.

  Thank you and have a great day!

• HP Touchsmart Tx2 1024ca.

  So a few months I posted because that randomly my serial number and the name of the product from my Touchsmart Tx2 laptop disappeared to be replaced by 1234567890 and Soyuz 3.0.  I was correct, without being able to find a solution because the computer itself still worked.

  When I turn on my laptop (running windows 7 Home premium) I can single connection before she pronounces it now wants to restart without letting me see the blue screen that says. Or he hangs up and freezes and I have to reboot myself.

  The same thing happens in Mode safe, apparently by chance I can connect at times.

  Tried to get this back to an earlier point, problems persist.
  CD/DVD drive is recognized by the computer / device but Manager does more or the other.

  Currently, I have no money to replace my laptop, so this isn't an option, but if anyone has any ideas / tips, they would be greatly appreciated. Because now I'll see if I can fix the restarting so I can see what the beautiful blue screen has to tell me. Will update this if I can get more information.

  Edit:

  Noticed before computer shutdown errors do not have to be turned on;

  0x0000000A & 0x0000003D.

  Transferred and took my computer to my girl in town IT probably will never know exactly what is happening, but it is back in working order.

• TouchSmart tx2-1370us: laptop found in the trash

  Yes, found this laptop in the trash. Replace the power adapter, it turns very well.  Problem is that the hard drive is a paperweight now. How to make a recovery disk? I get no option to order one of HP in the downloads section.

  Thanks for any help.

  Hi, @bullmecha :

  The page for your laptop on the link below product specification shows it came with Windows 7 Home Premium 64-bit.

  http://support.HP.com/us-en/product/HP-TouchSmart-TX2-notebook-PC-series/3999427/model/4041812/document/c01888937/

  I don't see that you can order a recovery disc for this model online but you may be able to order them by phone.

  Call HP at: 1-(800) - 474-6836

  If HP does them, you can always get a game from this provider no HP on the link below...

  http://www.computersurgeons.com/p-17159-recovery-kit-589307-001-for-HP-model-number-TX2-1370us.aspx

• AuthenTec AES1610 on HP TouchSmart tx2 1025

  I have3 a TouchSmart tx2 that I recently upgraded to Windows 7 Professional 64-bit with a clean install.  Everything works fine except for the AuthenTec AES1610 fingerprint reader.  I installed the drivers for it as DigitalPersona directly on the site of hp.  Device Manager tells me that my awesome biometric device works, but digital persona tells me that the drive cannot be detected and I connect my player or install the driver for it.  I looked online for this problem and found that DigitalPersona has compatibility issues with the latest driver for this drive.

  Performed troubleshooting.

  -Uninstalled and deleted the driver manager device and then checked for material changes that installed automatically the driver.  IN CASE OF FAILURE

  -Install an older version of DigitalPersona.  IN CASE OF FAILURE

  -Installed an older driver for Vista on my Win7 computer.  IN CASE OF FAILURE

  -A attempted to install the beta version of AuthenTec True Suite.  IN CASE OF FAILURE

  -J' I did other things but I don't remember and I have to go to class at the moment.

  Please help me, I spent weeks on this problem.

  OK, I downloaded on Mediafire.  Here is the link.

  http://www.mediafire.com/?m2av2qygjvm

  I hope this works.

• TouchSmart tx2-1370us Recovery Disc Set failure

  I am writing on behalf of my sister.  Here is his story:

  Screen of her laptop TouchSmart tx2-1370us broke earlier.  It's under warranty where she bought in so he was expelled to be repaired.  When he returned, the screen has been set, but there was a note indicating that they had lost its Windows 7.  The computer loaded and executed perfectly, but it was the pop-up "is not a genuine copy of windows.  She claims that she was unable to read the sticker product key the computer good enough to get it to accept anything, she entered.  When she called the store, they said that HP would be able to help get it back.  HP sold its recovery disks which were to restore the computer.  It is a 3 disc set, marked 2 System Recovery DVD Windows 7 Home Premium and 1 additional CD labeled Application & Driver recovery CD.  CDs ran several times still to come as fruitless after the first 2 CDs.  I won't get in his experience of the customer support, but she claims that she spoke on the phone with HP 6 times in the course of a week and nothing they had to say or to offer.  Always unsuccessful recovery message.  She abandoned, almost crying at this time, and I said I'll try.

  After a bit of searching I found a patch on the HP website that would supposedly solve the problem of recovery disks.  The patch was properly installed, green checkmark and all, and all 3 CDs was successfully.  The computer restarts, the screen of the Installation of the HP software ran for a while before another restart then the usual recovery failure message.  I tried many times with the same result every time.  I saved the newspaper from the last go to it and post it below.  It seems the States BIOS Vista as OS, but she bought the computer pre-loaded with Windows 7.  Could there be something in that fact cause a problem?

  Someone suggested to reset the BIOS to factory default, but that didn't work either.

  When you save the log to USB, I could see all of the files, there are 3 readers listed SDV (C Local disk (D & BOOT (X))

  For any help or suggestion would be appreciated.

  Here is the log:

  --------------------------------------------------
  [2:30:01.41] enter audit OS Edition...
  ----------------------------------------
  [2:30:01.41] check RStone.ini file to determine the required edition.
  [2:30:01.44] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [2:30:01.46] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [2:30:01.47] current edition is [HomeBasic]...
  [2:30:01.47] [start] necessary. Don't need to upgrade...
  [2:30:01.47] [Starter] needed...
  [2:30:05.17] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [2:30:05.17] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7600.16385

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  Error found: you have set the flag of Vista on an image of Win 7, please use EEPROM to set ~ OS SKU ~ value = 2
  ---------------------------------------------------------------------------------

  [ 2:38:37.07] ------------------------------------------------------------------------------------------
  ...
  Failed to update factory! ***
  [2:38:37.07] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [ 2:38:37.07] ------------------------------------------------------------------------------------------
  [2:29:20.80] Start BBOffline.cmd...
  UPDrv = [C:]
  [2:29:21.35] value UIA 951 error Code
  [2:29:21.68] start [corrections].
  [ 2:29:21.68] ---------------------------------------------------------------------
  [2:29:21.68] FixUps.cmd...
  [2:29:21.68] create overall progress information...
  [2:29:21.72] complete FixUps.cmd...
  [ 2:29:21.72] ---------------------------------------------------------------------
  [2:29:21.72] start [Tweaks for SDRD].
  [ 2:29:21.72] ---------------------------------------------------------------------
  [2:29:21.72] SDRD Tweaks to change the regional settings default user...
  [2:29:21.72] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [2:29:21.76] Run "IntlCfg.exe - skudefaults: US-image: C:
  [ 2:29:27.64] ---------------------------------------------------------------------
  Housing starts [2:29:27.64] [Sleep 10 sec].
  Starting price [2:29:37.68] [creation RStoneFUpdate.INI].
  [2:29:47.78] start [create 1 GB Pagefile for offline].
  Volume in drive C has no label.
  Volume serial number is 60E6-4F60

  Directory of C:\system.sav\bbv

  01/01/2001 02:29 1 073 741 824 pagefile.sys
  1 file (s) 1 073 741 824 bytes
  0 26,019,311,616 dir bytes free
  [2:29:47.85] start PININST.exe for offline...
  [2:30:13.27] Start SysID Check...
  [2:30:16.34] Start Option control code...
  [2:30:18.37] Start PIN Tweaks...
  [ 2:30:19.44] ---------------------------------------------------------------------
  [2:30:19.44] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [2:30:19.44] update PININST_BBV.ini...
  [2:30:19.46] update PININST_BBV2.ini...
  [2:30:19.48] update PININST_BBV2POST. INI...
  [2:30:19.49] update PININST_BBVClean.INI...
  [ 2:30:19.52] ---------------------------------------------------------------------
  [2:30:20.40] starting factory updates...
  [2:30:27.43] installation start QFE offline...
  [2:38:36.81] PININST_OFF: PAST...

  [2:38:36.91] Type C:\System.sav\Logs\BBFindEr.log...

  [2:38:36.93] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [2:38:36.93] FUList.log to check if there are double Desc...
  No duplication.
  [2:38:37.05] duplicated No. Desc is located... PAST.
  [2:38:37.05] there was no update from the factory...

  Lets take a chance it's for W7

  Go here and download the correct version of W7 (home or pro, they have not a starter edition), version 32 or 64 bit and the language, it's going to be a file iso very large, once downloaded, burn it to a blank disc DVD + R as an Image, this can be done on a Windows 7 PC, right-click on the iso file and select 'Open with' > 'windows disc image burner.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  This will make a regular windows 7 installation disc allows you to get Windows installed, use the key to see if it will be ignited.

  Then, you will need to download the drivers for your specific model on the HP site and install it.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4041813&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

• where is the fingerprint reader for a laptop of HP TouchSmart tx2-1025dx

  where is the fingerprint reader for a notebook PC HP TouchSmart tx2-1025dx help please

  Hernandezeric2, welcome to the forum.

  Here is a guide that has a video on how to configure the fingerprint reader.  It should show you the location of the reader.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• I'm running Windows SP2 of Visa and get the following message is displayed at startup: "sasnative32 file not found Autocheck ignored."

  sasnative32 not found

  I'm running Windows SP2 of Visa and get the following message is displayed at startup:

  'sasnative32 file not found that autocheck ignored. '

  I found this message in the registry and deleted but it keeps reappearing.

  It does not seem to cause operational problems, but I want to fix.  Any suggestions?

  The BootExecute key should contain autocheck autochk *. This measure of Chkdsk to run at startup.

  You have all Tune Up or optimization programs installed? It is possible, it is distributed with a different brand.

  You can determine what is written in the registry key by using the Process Monitor program

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645

  If you have not used before, there is an introduction to use it here:

  Windows Sysinternals Primer: Process Explorer, Process Monitor and more. Tech· Ed 2010 North America | Channel 9

  If the value has been restored in the register at the time wherever you can connect, you will need to use logging to start. This can significantly slow down the boot.

  You may be able to determine what is responsible for disabling the departure of items using msconfig.

  http://support.Microsoft.com/kb/929135

• Error that is displayed at startup is the file 0 x 80070570 is corrupted deleted od.

  I have a laptop Vaio VGN-NW11S startup it goes in the recovery of the system, but the system restore does not work and the error that appears is the file 0 x 80070570 is corrupted deleted od.  I can't do more.  I don't have a recovery disk.  Help, please!

  Hello

  To troubleshoot further, we demand that the Vista installation disc. I suggest you contact the manufacturer of the computer to do. However, try the following steps:

  Step 1: If the Startup Repair tool is an option of recovering preinstalled on your computer:

  a. remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer.

  b. do one of the following:

  ·          If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·          If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  c. the display Advanced Startup Options , use the arrow keys to select repair your computerand press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).

  d. Select a keyboard layout, and then click Next.

  e. Select a user name and password, and then click OK.

  f. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

  See: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

• "Windows Error Recovery" displays at startup

  original title: when I turn on my computer I get a black screen that says "Windows Error Recovery".

  He then said: "cannot start Windows. A recent hardware or software change might be the cause. "To solve the problem:

  It said to put in my Windows installation disc and restart and then use the "repair your computer".

  I put the disc and start again, so the same screen came. Then I hit OK to start Windows normally and a screen that says "Windows Boot Manager: could not start Windows."

  I keep hitting good for all options and keeps it running across 3 screens. Does anyone know what I need to do?

  How to start windows from a cd or dvd

  If the page install Windows does not appear and you are not asked to press a key to start (or "boot") from CD or DVD, you may have to specify that your computer use its CD or DVD drive as the boot device. This means that you must set the CD or DVD drive as the first startup device in the basic input/output system (BIOS). Here's how:

  1. Turn on your computer, insert the Windows installation disc, and then restart your computer.

  2. Newer computers usually display a startup (or boot) menu. In the start menu, select "Configuration of the BIOS," or "BIOS settings," or something similar.

     Note:

     • Procedures for this vary depending on the manufacturer. Check the documentation that came with your computer or visit the website of the manufacturer of the computer. Each computer has its own options of starting (or starting) and access to the configuration of the BIOS. If your computer lacks a start menu, look for a message that says "Configuration of the BIOS", "Settings of the BIOS", or something similar, and then press the appropriate key when prompted to display the BIOS Setup screen.

  3. The BIOS Setup screen. On the BIOS Setup screen, select the option called "Boot order" or something similar.

  4. Select your CD or DVD drive as the first boot device.

  Restart your computer, and then start Windows from the installation or the DVD CD

  Startup Repair
  

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows Vista installation disc:

  1. Insert the installation disc.

  2. Restart your computer.

     Click the button start , click the arrow next to the button lock and then clickRestart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  4. Choose your language settings, and then click Next.

  5. Click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  If the Startup Repair tool is an option of recovering preinstalled on your computer:

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock and then clickRestart.

• Do one of the following:

  • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  • If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

• In the Advanced Boot Options screen, use the arrow keys to highlightRepair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).

• Select a keyboard layout, and then click Next.

• Select a user name and password, and then click OK.

• In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs

If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• TouchSmart tx2 digitizer pen acts as if it was more 'ink '.

  Hello

  I have a TouchSmart tx2 1370us possessing a pen from the digitizer.  I don't know if the pen or display for the pen hardware goes wrong.  The best way to describe what I see is when a real pencil is about to run out of ink. When you write, you get a little ink, then nothing and then ink again.

  I would like to be able to determine if it's the pen or display hardware which is a failure.

  I tried the following.

  Installed Windows 7: the same results

  Install windows 8: same result

  Note: each installation of Windows was a new installation again.  No upgrades or 'repair' installation.

  I'm pretty confident that it is not a driver issue because the result was the same.  I tried with the pilots and pilots of the digitizer.  Windows supports the pen without the drivers of manufacturing.  honestly, I have the best results in time of response without drivers leaving the default windows drivers to support the pen.

  I know that the display was not all tasks 'dead' because the pen is able to operate in all areas of the screen, but eventually it will stop writing on the screen a bit and stutter a bit and then resume writing.  The cursor will disappear at the same time.  During the failure of pen touch and mouse will continue to function.

  The fault returned the pen usless right now and I would like help to determine if the pen is defective and, possibly, a new pen.  I think that HP would be a good source to know that there could be a solution or a previous case in the CV database. I was not able to find a solution from the side of consumers.

  -Thank you

  I bought a replacement ballpoint pen, and so far things are working properly.  So far, the issue seems to have been the pen.