HP1000: request for bios password
Hello.. I'm really grateful if you can provide the bios password for my computer laptop hp1000. Thank you in advance. Serial number: 5CG3100DZF
Enter: 33144579
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Request for BIOS password after trying to wipe the hard drive?
Hi - I got a new computer and tried to erase the hard drive on my old Toshiba laptop for sale on. It is a Toshiba A-210 and is about three years old.
I put the "settings factory restore disk" and tried to follow the instructions on the CD cover. However, the instructions don't match the options given, I did something where I thought I was wiping the HARD drive. It seemed to go ok, but when I tried to start it again, it loads a black screen type "MS-DOS" asking for a password.
The password only I put up on the computer was for my user profile, and it's not accept that. If I try to go on without the password, the computer turns off.
I tried Googling and it could be a BIOS password, I think, but I've never been one of these. The only suggestions I could find for fixing involved by pressing one of the buttons "F" and move to Windows, but I can't get an answer using the 'F' keys On the Toshiba site it said that I needed to have it fixed by one of their authorized places, but I don't want to spend money on it, because I was trying only to erase the hard drive before trying to sell it on or scrapping it.
Does anyone have any suggestions? My hard drive was erased? There is nothing really confidential there, but I like it as clear as possible, I really don't mind if its working, I would consider it breaks to pieces.
Post edited by: katy_c
Hello Katy
After reading your thread I don't understand what you've done to lock your computer.
Still is it BIOS password cannot be set by mistake.When the BIOS password to settle should be written twice before, it will be activated.
What to do now? Is that the BIOS password can be deleted by a combination of keys or something simple. BIOS password is the most important safety feature and must offer the maximum protection of the BIOS.
You can sell your laptop without HARD drive too. On eBay, I saw many laptops that will be offered without HARD drive for data protection reasons. HARD drive can be exchanged for less money and it is not so important hardware component.In the history I see a problem only: BIOS password. You can offer a little cheaper laptop and the new owner can pay for password removal.
It is not easy to give you the right answer. I just want to be a little more realistic.
-
Equium P300-16 t has not started up - now asking for Bios password
Hi everyone, I hope someone can help.
I have an Equium P300-16 t.
First it wouldn't start, just the media & power led lights.Found that the upper ram module no longer works.
With only of ram in the computer laptop lower slot will start. Test different combinations of modules, but unit will not start with the lower module filled.At least it starts I thought, but now after the toshiba screen, I now get a screen asking me a bios password.
Research on the web, I see that it is a random problem.
The unit is out of warranty.Any suggestions please
Thank you
FIAHi mate
Unfortunately, it seems that the laptop calling you the BIOS password (don't know why) who is not known to you
In this case, you should ask a technician using ASP.
The guy was able to remove unknown BIOS password by using a special procedure.As far as I know it of not possible to remove unknown BIOS password without help from ASP.
Good luck
-
Just change the administrator account for standar now the computer keep on asking the password I continue to put the one I use to have but nothing happen how to find the password, usted an i have I removed it now what?
Hello
see if that can help you with this status has changed for the account
worth a try
You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:
- Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
- Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
- Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
- Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.
-
Administrator for BIOS password
Hello, I will like to know my administrator password. My 3 try error code is 77107427 on a Hp Pavilion G4. Thank you!
Please try the below indicates password to unlock and log on to your laptop:
68865409
OR
33064142
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
K N R K
I work on behalf of HP
-
Enter admin password or power on system disabled password 59304604
Hello:
Enter the unlock code...
46062220
-
Requests for excessive password
My HP610 just started I have to retype my password whenever the screen is resting. How reset so I just type the password when I start the cpt.
Hello
Open windows control panel. Open preferences, click on the link of the screensaver at the bottom right and in the next window, Remove the tick from the box "on resume, display logon". Click on apply, then Ok to save the change.
Kind regards
DP - K
-
Requests for current password at startup. I don't know the password
Error code: CNU9292NY2
Hello
Please enter (all lower case)
e9lo7o79i7
Kind regards.
-
Envy 17 Notebook PC E0K85UA #A: reset of password for BIOS
I put my password in the BIOS using special characters. (ie. xxxx % ^ % &)
Long story short, I can't return to my computer.
How can I reset my password for the BIOS boot?
Product: E0K85UA #ABA
Model: 17-j013cl
Thanks in advance!
Hello
Enter the BIOS password incorrectly 3 times and it will generate an error code or system stop the code. Once the code is generate, use the link below to generate the reset code
1. use the unlock code you generated to enter BIOS
2 disable all passwords that are enabled in the Security menu of BIOS.
3. If the request for current password - enter the unlock code
4. for the new password, simply press the ENTER key
5. repeat the same thing to check the password column.
-
There is no URL line, that anything can be taken.
Also, I have reinstalled the program as well. No change. Always default to a request for a password THAT I HAVE EVER CREATED.
Full disclosure: I reached to reconnect cable and pressed my chest against my keyboard while the computer was in mode 'sleep', with Firefox running in background. When I was in, the browser has been locked. I tried all the passwords I know and use. No luck. Following addy won't charge, even if the entry on the home page.
chrome://pippki/content/ResetPassword.XUL
Yet once, no url line does open, I run the browser, more. I just get the following message:
Please enter the master password for the software security device.
Help! Thank you!
Create a new profile as a test to see if your profile is the source of the problems.
See "basic troubleshooting: a new profile:
There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.
If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.
See:
-
Satellite A200 - 1 GB BIOS password request
Hi all
to date, I have replaced my old battery and I saw my laptot to request a bios password.
I don't know what happends excactly because I never use any pass in my pc.
Could someone explain to me what is happening?
PS: I already talk with the Greek customer support but... never mind.
Thanks in advance
Unknown BIOS password can be removed by an authorized Toshiba.
-
I need a universal password for bios
Sir help on my computer.
I have an Acer emachines e525 laptop asking for bios password before you start the computer. so, what should I do. Please help me by providing the universal bios passwordContact Acer technical support. MS - MVP - Elephant Boy computers - don't panic!
-
HP Mini 110: HP Mini 110 off months, now wants a BIOS password at startup
It was off for a few months. This seems to be a request for bios.
Whatever I give it fails and on the third attempt and gives what appears to be the serial number of the computer: CNU9384JRV
Clues as to what the self-generated mystery password can be?Hello:
Please read the first post on the link below which should solve your dilemma.
-
HP 15-g019wm laptop bios password
Please help with system of disables the code. Need password to enter the bios. Thank you
Dear customer,
Welcome and thanks for posting your query on the Forum from the HP Support
Looks like you are looking for a password here, we will surely help you with this problem
Please try this password = 73134207
Steps to follow:
1. use the posted above unlock code to access the BIOS
2 disable all passwords that are enabled
3. If the request for current password - enter the unlock code
4. for the new password, simply press the ENTER key
5. repeat the same thing to check the password column.
6. then exit the BIOS saving & exit option to save the changes.
Troubleshooting:
Incase if the password does not work please try a Hard Reset as follows.
1. power off the laptop
2 disconnect the power adapter and remove the battery
3. press the Power button for 30 seconds
4. connect the power supply/AC adapter (leave the battery for now) & start Notepad
5. If now see you a password, please enter the same password I've shared before and press on enter
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
K N R K
Although I am an employee of HP, I speak for myself and not for HP -
Hello
Another request BIOS password.
My code is 56923061
I recently got this and need to access the BIOS.
Thank you!
Hello:
Please see this post that should solve your dilemma.
stems-and-Software/System-Halt-Error-M http://h30434.www3.HP.com/T5/notebook-operating-Sy...
Then...
You can:
1. use the unlock code you generated to enter BIOS
2 disable all passwords that are enabled in the Security menu of BIOS.
3. If the request for current password - enter the unlock code
4. for the new password, simply press the ENTER key
5. repeat the same thing to check the password column.
6. then exit the BIOS saving & exit option to save the changes.
Maybe you are looking for
-
G6-1A60US: upgrade my CPU
I want to improve my CPU on my G6-1A60US. The current CPU is the ATHLON II P360 2.3 GHZ 35W DC. So here's where to find issues. My card mother manufacturer is 640893-001. Here are all the processors and laptops G6 supported: SPS - IC PROC ATHLON II
-
my computer is not let me finish my system recovery it says windows does not start because the followingfile is missing or damaged \system32\hal.dll. of and re - install a copy of it
-
Update wireless adapter on Sony Vaio VPCF23EFX
Hi all I want to improve my Atheros AR9287 wireless adapter that came with my Vaio laptop. I try to have the party upgrade compatible with the dual-band standard and therefore, compatible with our new 802.11ac 802.11ac router. 1 is it possible? 2 the
-
HelloI am having some problems with muse. I use the latest version.2015.2.1.21, CL 801520 File Format: 352Mac Os 10.11.6I can't exit the application.I can open the app, works without problem with muse docs (create, edit, save and publish sites).I can
-
Help driver HP Pavilion a6300f
Hey guys, so I lowered the windowss vista(pre-installed) for windows XP Pro SP3 note but I don't think about drivers before doing so. So now I have no internet connection, and I'm pretty sure that the sound is not there as well the nvidia driver. I l