HP1510 can't find a draft mode or economy
Hi, I wonder anyone can help?
I bought this printer a few weeks ago, very happy with it, but couldn't find a way to print project!
I use it with 2 computers, running back Win 7 and Win 8.1 times are up to date and works ok.
I searched high and low for a solution but got nowhere.
When I go into the printing including advanced preferences, I get very few options and no sign of a treaty or a power saving mode.
Thanks for reading and for all the answers.
Anthonyf
Hi muirbabe,
It is possible, it could be a nuisance pilot. At this point, I recommend you to try a different driver. Please see this message, How to set other printer in different Versions of Windows drivers, by @Shane_R.
Hope this will solve the problem for you, let me know what happens!
Tags: HP Printers
Similar Questions
-
HP 8100 - can't activate the draft Mode.
Hi, I bought a HP 8100 Pro printer a few weeks ago and I can't try to activate the "Draft" mode with it.
When I try to activate the draft mode I and get an error of type message conflict.
I am running Windows 7 and the HP is connected via a USB cable.
Does anyone know what I need to do in order to print in the project?
Thank you.
Rick.
Well, I have not installed the software yet, but after looking at your screenshots that I came up with an idea and the bear with me, after all, it's just an idea, it cannot be the solution.
We will select plain paper, uncheck the Custom box, choose Project then select Custom and check that the paper is still paper, if it is not try it back. Then try to select the quick project in advanced settings.
I notice that the parameter that you currently have is best, I wonder if it is maybe what is in conflict with the output quality.
Let me know weather this fixes the problem or not, if not I'll install the software and get this figured out for you.
-
When I go to a news web page, it loads with 4:3 aspect ratio, instead of the already in 16:9. This is not limited to a single Web site and is a distinct change since the download of the latest version. I haven't downloaded or changed what would have caused this.
Check that you are not running Firefox in compatibility, or with a reduced screen resolution mode.
You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
Make sure that all items are disabled in the tab "Compatibility" in the Properties window.
-
My s4 is set to headset mode, how can I find this ring mode so I heard the calls?
My s4 is stuck in headphones, not allowing me to hear incoming calls, how to reset ring?
Restart the phone
-
after duplicating the LAYER, I'll EDIT FILL LAYER and can not find the NORMAL Elements 9 mode
after duplicating the LAYER, I'll EDIT FILL LAYER and can not find the NORMAL mode
The arrow keys did! Thank you!
-
Flag: Can I configure printer 5532 want to print in draft mode
I have a printer 5532 Envy which is used by an Apple MacBook 2.0, HP DV 6500 and several mobile devices. To save on printer ink, I thought printing in draft mode called for me. As far as I know, there's no option to make the printing quality does change on a print screen. Draft Mode is available for the 5532 desire and if so, how do I change?
Aardvark1,
Thank you for responding. I thought my question would have got lost
Re: What version of OS X is on your Mac Book? You can find instructions for printing in draft mode:
My MacBook 2.1 uses OS X 10.6.8. FYI, I also use a HP Pavilion dv 6500 with Windows 7.
Please provide the information as my iPad cannot use draft mode, but I read the links you provided on HP ePrint. to see if it will work with the iPad
-
With the latest update of firefox (38.0.5) I take away the new features that I would never use the button 'save for later '. Then the notification popped up in the navigation bar for the new feature 'in player mode', which is another thing that I'll never use. I right click it and chose "remove from toolbar". This action removed my address bar. My navigation bar is still there, but the address bar to enter a URL has disappeared. It's just my research and my download bar and buttons of AdBlock. Usually, I have my bar address/URL/navigation to the left of the search bar with the navigation arrows. When I go to customize I can't find the address bar. I have a particular look, I prefer and would not have to go through the restoration of values by default if I have to. Maybe I'm just missing something stupid obvious and I just need someone to point out. Thank you!
I found this link
https://support.Mozilla.org/en-us/KB/reset-preferences-fix-problems
And was able to "Refresh" my firefox. Now the long process of return to my silent settings I prefer. Really disappointed with firefox for the first time. Not the solution I was hoping.
Details on how to remove the 'drive mode' icon of a book of the URL bar it would be appreciated.
Thank you!
-
Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?
Well you can press Ctrl + Enter or you could re - turn on the menu and the toolbar https://support.mozilla.org/en-US/kb/display-thunderbird-menus-and-toolbar .
-
I have a lot of issues of brand book with websites contained in each folder. I'm able to sort sites within each folder alphabetically by name, but I can't find a way to sort the records themselves in alphabetical order by name. I speak not in a display mode, but in how they appear when I click on the tab my favorites. Can someone explain to me how to do other than manually by dragging because it is extremely difficult for me, due to the fact that I am with limited movement tetraplegic hand dexterity
Folders of bookmarks you created are in the folder Menu bookmarks. "Sort" this folder.
-
Windows xp pro does not work in normal mode. I can make it work in safe mode. I can't find my XP cd. I don't have the serial code and key. How can I load xp and try to fix the problem.
Thank you
Mikeoriginal title: need windows xp proHello
Since it works fine in safe mode, I suggest you to try to perform the audit and the boot if it helps:
http://support.Microsoft.com/kb/310353NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
-
WRT1900AC. I can't find the 802.11ac network Mode option.
I bought the router WRT1900AC last Thursday. I did the initial installation (manual mode). I use a Toshiba Chromebook 2 with a wireless adapter.
But on the 5 Ghz wireless tab, I can't find the 802.11ac mode. I only have these options:
- Mixed mode
- 802. 11A / n only
- 802.11n only
- 802. 11 a only
Where is 802.11ac? How to use it?
My wireless settings are:
Mixed or are A/D only the CA Protocol.
-
Hi all!
I'm a newbie here, please help me. Just bought a new laptop, 4520 s and can not install windows in AHCI mode. Very strange things are below:
-I'm reading on this tread: http://h30434.www3.hp.com/t5/Operating-systems-and-software/No-SATA-AHCI-drivers-for-6440b/td-p/2592... And I havea even question...
-Have these:
PCI\VEN_8086 & DEV_3B2D. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D.
PCI\VEN_8086 & DEV_3B2E. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B2E.
Hardware items, but can not change driver PCHM SATA AHCI Controller 4 Port or Port 6 ... BSOD and reboot even when...
-tried to find out all the correct drivers, no results...
-When it is used the nLite and running the Windows installation again with ACHI (setting in BIOS) mode I just receive this message in the first minutes of blue screen: can not find the ACPI. SYS... Press a key to reboot.
Help me please guys, if you can.
Thanks in advance, Peter
I had the same problem and now works properly. That's what I did:
1 position (BIOS) setting to IDE compatible mode
2. install XPP as usual.
3. install the drivers for the chipset Intel (sp46692)
4. download and run softpaq for Intel Matrix Storage Manager (sp45106)
5. go to the controller Start > Run > devmgmt.msc > IDE ATA/ATAPI
> Port controller 5 series/3400 Series 6 Chipset
6. set to update manually the folder c:\swsetup\sp45106, with option "have a disk.
7. Select "PCHM SATA AHCI Controller 6 port".
Windows says it is not compatible, but it will be restarted from the nest
8 restart the computer, and set its mode controller SATA (BIOS)
9 complete! Windows does not boot ok
I hope you understand my instructions: English is not my mother tongue and may be poorly written. In any case, it worked for me.
Miguel.
-
I need to disable the Mode of UAC Group Policy by accessing local policies in W7 but start/search can't find secpol.msc. Access is denied to the different files of the user, search on internet Explorer 9 wit request options for the approval of the system of. Iamthe single personal onthis computer administrator at home. Start/Search can not find secpol.msc, nor can I change the default search even IE9 mode without failure. How can I Devil Mode of UAC Group Policy and eliminate the ghost system administrator?
If you have Windows 7 Home Premium then it didn't GOT secpol.
Why do you feel the need to turn off UAC on a computer at home? You should not really, you know, and in fact there is absolutely no need to do.
So what user files you are denied access to? Is it Documents and Settings perhaps?
-
I tried a few things to get my sound. am in safe mode and can't find a way to go back to normal mode, I fixed my sound
I have no sound. I have an emachine that less old of one year here I tried Click START TYPE MSCOFIC HIT ENTER ON BUTTON EDGE WENT to UNCHECK SAFE MODE click APPLY & OK there is no having worI
I have fixed my sound I restored in eight days and it worked
A moderator has moved this thread to the music and its Forum.
Hi, James.
Try this:
In the box to start the search , click Start .
- Type msconfig and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
Click on the Startup tab
If secure boot option ensure that you do not have checked (no options must be checked)
If you, uncheck the box
Click on apply (you can then restart windows or go to the next step)
- On the general tab, click Normal Startup - load all drivers of devices and services, and then click OK.
- When you are prompted, click restart.
http://support.Microsoft.com/kb/331796
Edit: No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
-
Windows 8 CS6 bridge I can't find the tool magnifying glass on the screen, the Preview Mode
Windows 8 CS6 bridge I can't find the tool magnifying glass on the screen in Preview Mode, I need to have metadata, preview, thumbnails and missing all operational at the same time, but where to commit loupe tool?
Hello
You display a picture in single view?
See Creative Suite * preview and compare images in Adobe Bridge
Let us know if this helps
Concerning
Assani
Maybe you are looking for
-
Is there a Firefox app for iPad/iPhone?
Is to see an app for Android. Is there a Firefox app for iPad/iPhone?
-
I have a lot of pages bookmark in Google Chrome, and I don't want their favorite one at a time.
-
"Unavailable" or any Bluetooth simply not there (Pavilion DV7-4180ea)
Dear members of the staff and forum, I use a nine Pavilion DV7-4180ea (Windows 7 64-bit) that was given to me as a gift for a little less than a week, but since the beginning have not been able to get bluetooth. I can't find a solution on the interne
-
Loading screen, do not appear
I'm working on a code that was developed by my colleague. I think that there are some flaws in the design. I'm putting a loading screen when browsing the A SCREEN-> SCREEN B. The reason to use the loading is, data SCREEN B screen is obtained from net
-
orders ms back does not not in windows 7
xcopy used to work for me on windows 7 (version Home premium) but now xcopy will not work under windows 7. I get a "command not recognized...... not operable...» "message