hp1536dnf: Message on control panel says receive... page.

Similar Questions

• Said automatic updated Security Center is disabled; Control Panel says it's on

  Recently starting Win xp, Security Center displays indicating that automatic updates is disabled. When I click to turn it on, he says he cannot not and indicates that it takes to do this via the control panel. In the Panel, it is stated that automatic updates is enabled actually.

  It started a few weeks ago the same then, as a malware attack, which since then has been cleaned (apparently).

  I don't know if associated: try to use Microsoft Windows Update: breaks down, ditto always fails just check the updates.

  Even if the infection has been removed some repair work is needed.

  Take a look at the following article in the knowledge base.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424

  http://support.Microsoft.com/kb/968002

  If restarting of the services mentioned in the article above does not resolve the problem, you may need to use the Reset of Windows Update by using the tool FixIt.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I also found a convenience store of third-party, try at your own risk.

  Tool for troubleshooting Windows Update version 1.2 (April 13, 2011)

  http://hacksys.byethost2.com/winupdate/Windows-Update-Troubleshooter-v1-2.html

  I hope this helps.

• Security alert indicates the auto update turned off; Control Panel says it's. Huh?

  Every time I restart Windows XP Professional, I get a security alert saying that the automatic updates of windows must be activated. When I ask that it be lit, the answer is that it can't: go to control panel. When I go into the Control Panel, it says that the automatic updates is already turned on. When I try to check my status update, I get no results. I was not asked by Windows if we can download any type of update for several months. I have to be sure that my system is up to date and that automatic updates is enabled and functional. Thank you.

  Dan diamond

  I have windows Vista and my laptop does the same thing. After what seemed like hours of trying everything suggested, I decided to clear out all temporary files (again), turn off and unplug the laptop and removed the battery and wait 10 minutes.  After 10 minutes, I've replaced the battery, plugged in and restarted my laptop.  After all, was up and running, I tried Windows update again, and my laptop updated with NO PROBLEM.

• My control panel says "Windows could not search for new updates" error 80244019

  Error is 80244019

  How can I fix Windows update

  Hi Michaelwalsh,

  Thanks for posting your query on the Microsoft Community.

  According to the description that you posted in your message appears that you are unable to install the updates and get 80244019 error code.

  Error code 80244019 indicates a virus infection that has disabled Windows Update, or another service on your computer that is required by Windows Update. Since you've already scanned your computer, your computer cannot be infected by a virus more, now, it is recommended to make sure that all the important services responsible for updates of Windows are enabled.

  Follow the steps below to restart services required by Windows Update

  You must be logged on as administrator to perform these steps.

  1. Open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. In the Services window, double-click in the Background Intelligent Transfer Service (BITS)
  4. Under the tab general , under Startup type, click Manual, and then click apply.
  5. Click the encryption tab, and make sure that the service is enabled in every hardware profile listed.
  6. Click the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  7. Click the connection tab and make sure that the service is enabled in every hardware profile listed.
  8. Click the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  9. In the Services window, double-click Windows event log.
  10. Under the tab general , next to Startup type, make sure that Automatic is selected.
  11. Next to Service status, check whether the service is started. If not, click Start, and then click OK.
  12. In the Services window, double-click the Windows Update service.
  13. Under the tab general , next to Startup type, make sure that Automatic is selected.
  14. Next to Service status, check to see if the road is listed. If not, click Start, and then click OK.
  15. In the Services window, double-click software licensing.
  16. Under the tab general , next to Startup type, make sure that Automatic is selected.
  17. Next to Service status, check to see if the road is listed. If this is not the case, click Start , and then click OK.
  18. Close the Services window and try to install Windows updates again.

  Hope it would help. If the problem persists post returns with the required information, the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Unistall button control panel says that the Setup log file is missing.

  I have been using a registered version of Lightroom 5.4. I tried to uninstall it but the button control panel uninstall produced the answer that the Setup log file is missing and it wouldn't uninstall. I tried to delete all the files in and then put it back, hoping that he might happen to remove or repair. I have now two versions of 5.4 64-bit showing in Panel, neither of which I can uninstall. Help please.

  The uninstaller entry in Control Panel is created by an entry in the register. Remove the registry key will remove the list. This is normally done by the uninstallation process, but because quite simply, you have deleted the files, he left the info record behind. As shown here should clean your registry: solve the problems that the programs may not be installed or uninstalled

• Hi, I read all the articles say that more-hd - 9.5 must be removed from the Control Panel, uninstall program page... damage than more-hd - 9.5 does not appear...

  .. .on this page, nor done anything unusual. My antivirus avg picked up something two days ago and after that plushd remained calm down, come back later. Help!

  She is quoted in your list of Extensions

  • More-HD-9, 5-0.94.32 (e46480cf-7cf6-495e-af69-573053f52c72@b33ab36d-5952-49aa-adb2 - a41b3dbe51a5.com)

  You can remove it by going to:

  • Firefox orange button
  • Add - ons
  • Extensions
  • Find Plus-HD - 9.5.0.94.32, then click on remove
  • Restart Firefox, if you are invited to

• I recently had to re - install Windows XP on my computer and lost all my stored programs. Now my speakers do not work. The control panel says no audio device. What should I do to recover my audio? None

  My audio does not work. It worked before I re-install Windows XP. What should I do? I'm supposed to have an audio installation disc? I'm new on the technical aspect of computers, so I know only the basics?

  Using the Device Manager is a good way to get the drivers, but if you do a clean install on a computer or laptop, you must download the supplied drivers initially installed on the computer or laptop to the manufacturer. that is, if you have a Dell, then go to the Dell website.
  the site Web of HP/Compaq
  the Site of Asus
  Acer site
  Alienware website (Now owned by Dell)
  eMachines Web site
  IBM Web site
  Sony Web site
  Toshiba Web site

  Have I no all the em? Anyway, if you have a driver supplied with the computer disc, use this cuz he'll have original manufacturer drivers and the software that you get on the website anyway.
  Also, if it's a Dell, you would like to have a look and print their Instructions on how to install the drivers, Dell cuz drivers must be installed in a specific order.
  Good luck.

• After download of Internet Explorer 8 I can't open all the icons in the control panel. On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.

  Dear Sir/Madam,

  Yesterday, I downloaded Microsoft Internet Explorer 8 web from Microsoft Download Center.

  After downloading Microsoft Internet Explorer 8, I can't open any icons in the control panel.

  On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.

  Help, please. Thanks Gene.

  Thanks Gene.

  Dear: :

  Running sfc/scannow will not replace the missing rundll32.exe file.

  Why you post methods that do not work and will be just wasting time?

  Hove you never even seen this problem before, tried to recreate it so that you can actually see, or have you never really fixed?

  Why you learn not what sfc/scannow does and does not do?

  Here is a simple test to you and all your colleagues in the technical support engineer:

  Rename or delete just your c:\windows\system32\rundll32.exe file is "missing".

  Rename rundll32.exe---> rundll32.xxx

  If you started normally, before you can blink, the 'missing' rundll32.exe file quickly and quietly replace the copy in the dllcache folder.  It is the Protection of Windows file in action and you will see something like this in the Event Viewer log system:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\rundll32.exe. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5512.

  I beg you to perform this simple test to know how the sfc/scannow:

  Boot your system to Safe Mode or the recovery for the Windows File Protection Console does not run.

  For this example, we will use the system critical file rundll32.exe.

  Rename or delete your c:\windows\system32\rundll32.exe.exe file so the file is now "missing."

  A critical file, is it true?  It is on the list of the file 3498 knows the Protection of Windows and SFC files, but now he isn't.

  If Windows File Protection is running, the "missing" file would be quickly and silently replaced (try to rename or delete it in normal mode and it will be quickly and quietly replaced).

  Now, with your file rundll32.exe missing, start in Normal mode and try to use something like control panel to open something like Power Options and you'll see that familiar message:

  Control Panel
  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search.

  Now you have recreated a common problem with the missing file and seen the error of our own eyes.  A Microsoft Support Engineer will usually suggest running sfc/scannow for this kind of problem, but it will not work or help and you can prove it to yourself, and now you have reproduced the error.

  You follow own advice and run sfc/scannow to the end.

  The rundll32.exe is always had disappeared, right?  Did run sfc/scannow replace the missing critical system file?

  How can he be so sfc/scannow is supposed to replace the missing system files?  This is because it is not this that sfc/scannow does.

  Now you know sfc/scannow does not.  He did not replace your missing system file (don't forget to put your rundll32.exe back so you will have a).

  Now, go to c:\windows\system32\dllcache and delete or rename the file rundll32.exe from there - and it will be gone and not replaced automatically because the Windows File Protection does not seem after this record.

  Run sfc/scannow in full again.

  Replace the file rundll32.exe missing in the dllcache folder, since it handles missing files (not the system32 folder) IS the folder that sfc/scannow.

  Now you know sfc/scannow does.

  Do you need help to know too much about the corrupt system files?

  Since most people do not have a genuine XP bootable installation CD, they will not be able to develop a copy of the file that is missing from the installation CD, they have not.

  After some directions on how to replace the file when the user has no XP bootable installation CD authentic and that will be useful to all.

  If you don't know how to say "I don't know how" and I'll help you.

  You want to inform/warn the poster that SP3 is installed that running sfc/scannow will take a long time for the installation of SP3 CD?

  If you do not have a CD with the same Service Pack as your installation (most people don't), the posters are in for a rough and frustrating time.

  Of course this will help with the detachment of the Ministry of Education of the impossible to try things that don't work, but I thought I'd throw it out there for the 100th time.

• Control Panel does not open with a list of programs

  I need to remove a printer from the control panel & while the page opens it will not load programs

  I need to remove a printer from the control panel & while the page opens it will not load programs

  ==============================================
  Add - Remove programs can be slow fill pending...
  may be the answer.

  The freeware version of Revo Uninstaller can be worth a try...
  It allows to uninstall anything:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Revo Uninstaller - free and Pro Downloads
  http://www.revouninstaller.com/revo_uninstaller_free_download.html
  (Windows XP, Vista, 7, 8)
  (The free version supports 32-bit operating systems only)
  (The Pro version supports 64-bit and 32-bit operating systems)

  If you prefer not to install Revo Uninstaller on your system...
  There is a download link for a Portable version at the bottom
  downloads screen. Just download it to your desktop,
  Unzip it and open the folder revouninstaller laptop left click
  Revouninstaller.exe to run the program.

  Revo Uninstaller Pro FAQ
  http://www.revouninstaller.com/revo_uninstaller_how_to.html

  How to use Revo Uninstaller
  http://www.4kcc.com/How2/Revo.html

• can not turn on automatic updates in Control Panel

  I have Windows XP (SP3) and for some reason, I can't turn on updates Auto Windows in the control panel.  The page to make it is grayed out.  I am registered as an administrator.  Any suggestions?

  Hi MikeTinVA,

  You can check if this article helps.

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

• Huh? "Remote Control Panel" came with the update of the firmware, LaserJet P4014n

  I have 3 Laserjet P4014n recently updated to firmware 20140127 04.210.5.  If I use EWS log in as local administrator I see there's a new entry on the tab named "Remote Control Panel. I'd love to see what he does, but I can't.

  With the help of IE11, I click on 'Remote Control Panel' and receive a alert 'ActiveX settings are required to use the remote control panel. There is an 'OK' button below this alert. By clicking on the button 'OK' makes me a "sorry, unsupported browser.

  I fooled with my settings ActiveX IE11 and not got anywhere. The documentation for the update of the firmware is vague.

  Can someone tell me what is this new feature of 'Remote Control Panel' intrigueing?

  Answering my own question:

  A couple firmware updates, this EWS feature has been removed from my P4014n printers but added to my printers LaserJet Enterprise M601n.

  I dropped the past months trying to understand what he's doing since clicking on it never did much. But today, I accidently clicked on 'Remote Control Panel' and got a double chart of the front of the printer with all the buttons (OK, up/down arrows, red X, home, back and a numeric keypad). There is also an option "restart".

  It's very cool like SAP M601n does not in any way to simply cancel a job stuck in the queue. I was remotely restart the printer.

• When I connect to Hotmail I get a message saying "this page is access to information that is not under its control. It is a security risk. »

  original title: new Info box in hotmail:

  Recently when I sign in to hotmail messages I get a box that says: this page is for access information that are not under its control, it is a security risk. -What this means and what I can do to get rid of him?

  Hello

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• When you try to send a file from a Web site, I get a message that doesn't say "none created a profile. Use mail icon in Control Panel.

  When you try to send a file from a Web site, I get a message that doesn't say "none created a profile. Use mail icon in Control Panel.  I searched and can't find this icon.  Can you give me way better?

  You must set up your default email program to send on a Web site.  Go to control panel | Default programs and set your default e-mail program there.  If your e-mail program is web-based, then you probably can't use this feature (sends the Web site file), then you may need to copy the site, and then paste it into a new message and then send it.

  Steve

• I did no more than "volume control icon", error message says to add through "add programs" in the control panel

  original title: the Volume control icon

  I did no more than "volume control icon", the error message indicates to be added via "add programs" in the Control Panel, how can I do this?

  You are using Windows XP?

  This might help: http://support.microsoft.com/kb/319095

  And I hope that you have your Windows XP installation disc.

• Receive error message while tying to uninstall microsoft sql server 2008 r2 from the control panel.

  I'm trying to uninstall microsoft SQL server 2008 express R2 in windows VISTA from Control Panel and I get the error message "another program is installed. Please wait until the installation is completed and try to reinstall this software. " What should I do to uninstall. Please help me find the solution for this.

  This is the wrong forum.  This forum is for the Windows Vista installation.  The SQL Server Express forum is

  http://social.technet.Microsoft.com/forums/en-us/SQLExpress/threads

  The forum of answers Vista programs is to

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs?tab=all