Hp500-319NA I5: Hp 500-319NA I5 600w power supply suggestions

Similar Questions

• HP Pavilion 500-326na: upgrade of power supply for HP Pavilion 500-326na

  Last year, I bought a HP Pavilion 500-326na. I now want to update its graphics and to do this, I need to power level. I want to upgrade to a CX500, but the specs say that his current power is "external". I don't know what this means, and indeed, I don't know if I will be able to upgrade. I see no reason why I shouldn't be, but everything I've seen only offers assistance on internal types.

  Thanks for any help.

  Hello

  Look at the power supply cord.  If you have a device of black brick similar to those for portable computers, then you have an external power supply. PC with external cannot be upgraded with the installation of an internal power supply as a Corsair CX500 according to HP internal.

• Pavilion 500-339: improvement of power supply for a 500-339 Pavilion

  I posted yesterday on you want to upgrade the video card in my Pavilion 500-339. Now I see that my PC has a power supply 300W and higher end video cards require a 400W or more so I think the upgrade from my diet too. I know that HP is sometimes require specific types of equipment, so I really hope someone can direct me to a 450W or greater POWER supply... I'm looking on the internet and I see some specs I'm not familiar with that. Help? Thank you!!

  Hello

  The standard ATX HP power is 5.9 by 3.4 by 5.5.

  The Corsair CX500, CX600, or CS650m to adjust the dimensions above.

  Thanks for posting on the forum.

• Pavilion 500-217: 500-217 HP. new power supply

  Has anyone upgraded the power on this machine? The new GPU I want says it requires 400w and this one has only 300w.  Also, if I ignored that, this device seems not having all the extra power connectors that I see in any case.

  Does anyone have a suggestion of a power supply meets these requirements?

  Thanks, I was really considering this one. Reassessed to my needs and I'm going with the CX500. Appreciate the comments.

• Pavillion 500-214: I have a HP Pavilion 500-214 and need to upgrade the power supply to support a new video card

  I'm upgrading my video card, and the other needs at least 400w.  The existing PSU is only 300w.  What is a power supply compatible to be installed in the Pavilion 500-214?

  Well, we meet again.

  While the minimum requirement is power for most video cards 400W, I always offer at least 500W; 600W is even better.  This will allow a high maximum operating power.  A modular power supply is good in a medium-sized business, because just use cables that are absolutely necessary.  This allows for better circulation of air in the case.

  This is a power supply that should work for you.  You should check the measurements of the existing PSU (5.9 x 5.5 x 3.4 inches) with the measures of the new power supply to ensure that it will not go in the space provided.  The PSU is the backbone of the computer, this is not the place to save money.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Pavilion 500-329: to upgrade my power supply for my new GPU

  Hi, I recently got and 660 GTX ti as a gift from a Guild mate. Unfortunately, the stock PSU is a potato (very) disappointing 300W. Who also likes to scream when I'm still so things like move my mouse. Wonderful innit!

  in any case, I've been shopping around for a PSU that could fuel at least my graphics card for the recommended specifications, 450w, unlike what is 240 R7 in the system right now, which is recommended to have 400w... And I managed to find one that meets at my expecations in size and power output.

  I just want to see if someone has comments on the sizes to enter in the case of Pavvy 500-329.

  Since your Canadian, I took the liberty of a few analyses available of the PSU.

  Your current system has a R7-240 which is inspired by 30W.  The GTX660ti attracts 150W.  The net difference is 120W.  The original power supply is 300W but it is a maximum.  You'd never see your car top SPEED!

  I would like to see you get a Corsair CX CDN 96,19 600W as your choice. Here are the specifications.   It's 80 + efficient power consumption curve and focus not on your system. It is also an RIGHT in your system.  If cost is a concern, then I suggest you step down for the 500W version.  It's 20 less CDN.  Its also an exact adjustment.

• Update of power supply for HP Pavilion 500-056

  I want to upgrade to a discrete graphics card, but the 300 watt PSU is not enough.  It is not one of the standard sizes such as ATX12V, EPS12V, SFX12V (small footprint), LFX12V (low profile form factor), or TFX12V (slim form factor).

  Does anyone know of a specific diet that can fit in my computer case?  Without my ability to be upgraded will be severely compromised.

  According to the specs of HP Pavilion 500-056 desktop PC product page, your computer uses a power SUPPLY ATX12V PSU which is 150 x 140 x 86 mm (5.9 x 5.5 x 3.4 inches) in size. Please consider replacing it with a Corsair CX500, CX600, CX500M, or CX600M depending on your graphics card needs.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• The upgrade of the power supply for a HP Pavilion 500-054

  Hey people,

  I'm changing the 500-054 flag so that it can play a few games, not a hardcore gamer, just want to be able to play the occasional game. I want to get a lower end external video card, but this requires a power supply greater than 300. I am looking for a new power supply for my computer, but I couldn't find one for the 500-074. Are the ones that will work for my computer or I am a hopeless case?

  Thank you

  A standard ATX power supply will work. Please look at the Corsair CX430, CX500, CX600, or their variations of modular cables for your needs.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• I need power supply for HP Z220 CMT workstation up to 500 watt

  HI everyone I want to improve my diet is 400 watt, this does not work with my new graphics card, it's Asus GTX 770 Nvidia GeForce DirectCU II OC 2 GB GDDR5 he needs a minimum of 500 watts...
  Thank you very much for everything give me it please link or model power supply for hp workstation z220 up to 400 watt.

  Hello:

  Power supply in the z220 belong to someone, which means that you can not install any other food but the 400W provided by HP.

  You can also ask your question on the HP Business Support Forum - z section of jobs to see if anyone knows if one different PSU from another series of z that Workstation will work for your model.

  http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.U5nJ2f1OXGg

  For example the z600 has a 650W power supply, but I have no idea if this P/S will work in the z220.

  Perhaps someone on this forum will have some alternatives for you, but don't get your hopes up.

• improvement of power supply HP 500-164

  try to pass the power supply so I can install a new graphics card on a hp Pavilion 500-164. Need a cable to power additional pcie card. Got a corsair GS800 power went to install but do not have a 4-pin connector for CPU fan cpu on the motherboard connection. is there a cable adapter can get to connect to this processor cpu fan connnector? where can I find one? It has 2 Brown and 2 black wires to it. Not sure if I need a special or not. Thank you

  Thanks I feel stupid that I didn't really look at the connector. Split and it is working fine thanks

• Pavilion 500-516na: HP Pavilion 500-516NA 180w power supply

  Hi, I have a Hp Pavilion 500-516na, I'm looking to upgrade the graphics card Radeon x 360 r7 just to give you a little extra boost, but on the specifications for the graphics card it says need a 500w power supply.

  Looking at the specifications of power supply in my machine it says he only 180w?

  It would be really too low to run the entire machine and if so I think I would need food also upgrade?

  Thank you.

  Hello

  You good to go.

  You must coordinate the power requirements of the graphic replacement card with the power output on the new power supply (PS).

  Also check the measures of PS existing when buying a new PS

  A final exam is UEFI BIOS vs. You have UEFI. So the new graphics card must support UEFI, or have the ability to switch between each protocol.

  See you soon

• Pavelion in 500-220: new power supply and adapter installation

  Hello
  First name of the pc is pavelion 500-220 Indiana
  I want to upgrade with a graphics card called gtx 960 link below

  http://www.Amazon.com/GP/AW/d/B00T4BWGBM/ref=mp_s_a_1_4?QID=1427908571&SR=8-4&Pi=AC_SX110_SY165_QL70...

  Or
  http://www.Amazon.com/GP/AW/d/B00SC6HAS4/ref=mp_s_a_1_1?QID=1427908571&SR=8-1&keywords=GTX+960&dpPl=...

  That one fits perfectly?

  Second thing suggest me a psu at least 400 w, which can support this card and fits into my bench.

  Please answer this please...

  Hello

  Look for the Corsair CX500, CX600 or CS550m.  These PSUS have the same dimensions as your power supply.

  Consult this publication of the article.  Open your PC and make a few measurements.

• HP Pavilion 500-164: the upgrade of the graphics card and power supply on a HP Pavilion 500-164

  I'll be upgrading my HP pavilions integrated HD graphics 8570 D a STRIX ASUS GeForce GTX overclocked 2 GB DDR5 128 - bit DisplayPort HDMI 1 750TI. 4 a/DVI-I graphics card. With that I also improve my diet to a Thermaltake TR2 500W 240 pins power power TR-500. I was wondering if it of ok to do on the computer and will not damage it. It is extra steps when I install these. Initially, I got the PC with windows 8 but have upgraded to windows 10.

  Hello

  If the ASUS 750 TI requires a 6-pin auxiliary power connector and your computer is running a version of HP 8 BIOS then you should be OK.  Open your PC and measure to make sure that graphics card fits.  In addition, open the command RUN and enter: MSINFO32

  Your computer is running a version of HP 8 BIOS?  If so, and if it is possible to install the graphics card then go ahead. Find out what the return policy is before you buy.

  Thanks for posting on the forum.

• EAS console error adding essbase server after the power supply 500

  Hi guys,.

  I do a migration of cube 9.3.1 to 11.1.2.3 via the wizard of Migration of EAS.

  Yesterday, I tested the link and was able to copy it to an application. After having applied the Group of hotfixes,.500 I can't connect to the 9.3 old servers more. Nothing has changed. I can always get a smartview connection and by using the IP address of the server does not either, which excludes any network problem. When I try to add the old server again the console log says:

  Admin June 25, 2014 11:43:50 CEST com.essbase.eas.admin.defs.AdminCommands.AddServerToUserList Succeeded

  Essbase Server: lsrap11:1423 com.essbase.eas.essbase.defs.ServerCommands.Connect June 25, 2014 11:43:50 CEST

  Error: 0: your session is not connected to the server/agent Essbase.

  If anyone can replicate it? I would like to know if it is a bug and I have to cancel the Group of hotfixes to complete the migration the cubes.

  See you soon,.

  Alin

  I think it's a bug I've seen the same problem and then I rolled back EAS.500 and it worked again.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Qosmio X 500 stop during the game - but only on the external power supply!

  Hello.

  Since I updated my BIOS to 2.9 I had this HUGE problem. And now, I created a user here, in the hope of my colleagues advice owners of Toshiba.

  Let me cut it, as it's enough for me confused.

  I bought the computer in March 2010 - is still under warranty.
  I updated the BIOS from 2.8 to 2.9. I always kept my computer up to date with the latest drivers Toshiba - and is still.
  But now, after update BIOS, all of a sudden, my computer shuts down, rotates instantly, as if someone pulled the cord and there is no battery attached.
  But it happens that whenever I start a GPU really requiring program/application. It is not happed when I use the computer for all the days of the things or watch movies etc.

  I put it well 3DVantage and of course, it crashed.

  BUT!

  If I pull the rope and let it run on battery - even if the performance that comes out is less - it does not crash, never, in any game that would break if I had the string attached.

  I was in touch with Toshiba service in Scandinavia - I live here and they couldn't tell me what was the problem, but they were pretty sure that it was not related to the BIOS, because while I was talking to them, I installed 2.8, and it's the same thing.

  It has been sprayed, treated and some more with compressed air, and if there is no dust left, it would be like concrete. I ran the game in windowed mode, while having Speedfan running, the temperature will never be greater than 65 degrees Celsius. So it isn't heat related.
  I used 3DVantage to test the CPU and see if that too would break, once again nothing.

  I think the long terms of workload. The GPU goes off when the workload exceeds a certain percentage/voltage/whatever and something in the BIOS which controls it, changed or left unchanged and there for is not skilled with the rest of the updates to the BIOS.
  Or maybe the problem is not BIOS related? is it something else? I'm really confused and the fact that I can use it for simple tasks, only confuses me even more - so this is only a part of the graphics card which is damaged?

  Even if it is under warranty, wait 10 days (if I'm really, really lucky, like place I bought it, is not exactly known for good service condition) is the last option.

  This explanation is rather long, but I'm not not short versions, and if you feel like I left something, say so, and I'll do my best to provide you with information.

  Thanks in advance!
  Nikolaj.

  Post edited by: n_larsen - typos.

  > Speedfan shows also a tab called Temp1 - ACPI... It may be offtopic, but what is?
  When I order the windows event log, it shows some errors about ACPI: (translated by myself from Danish)

  Advanced Configuration and Power Interface (ACPI) specification is an open standard and defines independent interfaces for hardware discovery, configuration, power management and monitoring.

  66 temperature is not too high so I n t think that automatic shutdown of the bottom are related to temperature.

  I have your case, I recommend reinstalling the OS window once more; install the operating system preinstalled Toshiba using the recovery disk.
  Then check the features of the laptop. I mean that you should not install any other software before checking the laptop. In many cases 3rd party software could lead to problems of different laptop then you should check the laptop using factory settings.