HP50g: Strange table HP50g Representation when polar mode

Similar Questions

• The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server?

  I am running Windows 7 Pro 64-bit in a dish netwrok with no announcement. I can map drives on the server without any problems and everything seems fine. Then after a few hours it seems to lose the mapping on the drive. There are two mapping drives and he loses a. It will show in my computer as being mapped, but you cannot access it. You can connect to the mapped drive on bringing the command run and typing in the UNC path in.

  The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server? Once you tell to remap things in car are fine for a few hours.

  My question is where and why it does this?

  Thoughts?

  Thank you

  Tom

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Hope this information is useful.

• Behavior strange table when getting values

  I have a table that contains the TypeDef'd controls and I need to get a reference to the control of each element individually. To do this, I use the values property of the array Index that I put to the index of the item that I want to get. From there on, I can get a reference to the control. This occurs when the value of the table is changed through a simple value change event.

  When you change the value of an element, and then by using the property of Index values for the reference control at this level, the control returned reference is not one that should be. What seems to happen when I change an element in an array, this item automatically becomes the index '0' in the table itself. It's a very strange behaviour and I tried to go around for a little while. I've attached pictures of the screw that I use to show you everything.

  In the first image, I stressed the important portions in green. Going from left to right, the first Green Watch box that I'll put the index at which the table should be starting at 0. The reason I do this is because it is possible that the index display may be replaced by another value and lag between what we expect, it is (0). In the loop for, I set the property to Index values for what is the value of i. This, in theory, loop through all the items in the table, and then I get the value and the reference of this element. In the probe window, you can see the different values of the sons and I will refer to this in a second.

  In the second picture you can see the value of the table on the real front. The values of the sensors in the first picture taken after that I changed the value of one of the properties of the "Alarm 7" line. The value of the façade, it is clear that the 'Alarm 7' index value is 2, but when you look at the probe in the first image there shows that it is at index 0. Anyone know why this is happening and how to get the references to their actual index?

  1.

  

  2.

  

  
  

• Strange change in picture when I switch to develop mode

  Hello.

  Today, I met a weird problem with Lightroom. When I pass it draws to develop for editing photos, immediately, the picture changes. I get strange highlights blue appearing in an area that is largely black and red, where he is white. See the attached screenshot for an example.

  No idea what I did wrong? If I do a command Z (on a Mac), it changes just in library mode.

  Barb

  In the develop module, there are indicators of clipping to show you when you are clipping highlights or shadows. The shadows that are cut are highlighted in blue, highlights that are cut are highlighted in red. Clipping of the means that the shadows are too dark detail is lost or the highlights are too clear and detailed is lost. If you don't want these indicators to show, you can press the J key to disable them. But I consider as good indicators to help me fix my picture.

• Partition table / no entry of safe mode

  HERE'S MY QUESTION:

  I'M TRYING TO RECOVER MY XP DESKTOP COMPUTER. WHENEVER I TRY not to enter MY "SAFE MODE" VIA THE XP CD I GET NO PASSAGE. NORMALLY I CAN GO THROUGH LOG BUT I'VE NOW DAMAGED A PARTITION. I USED THE HELP FILE (FIXMBR) HERE IS THE MESSAGE I HAVE,

  * THIS COMPUTER SEEMS TO HAVE A NON STANDARD OR INVALID MASTER BOOT RECORD *.

  FIXMBR may damage your partition tables if you continue (of course I did). This could cause all of your scores on the current hard disk to become inaccessible.

  If you have problems to access your drive, DO NOT CONTINUE (of course I did)

  Are you sure you want to write a new MBR?       (of course I checked yes)

  Then... If I'm screwed?   I have to buy a new hard drive?   I can solve this problem?  Can I use the old as a ghost player to get my files?

  HELP ME OB 1... YOUR MY ONLY HOPE THOMAS

  Hi Thomas,

  ·         Are able to connect in normal mode?

  ·         What happens when you try to connect in safe mode?

  ·         You get the error message?

  I suggest you to run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• Featuring strange light in the "Normal" display mode

  Hello world. I would appreciate your help with a problem that had me driven nuts today. I'm sure that there is a simple explanation - but I'm certainly not!

  I had another designer working on one of my InDesign grids and when I open in Normal display mode - there's this strange cyan highlighting (see screenshot). I asked them to let me know if they changed something in the document preferences, but they did not get back to me.

  It does NOT highlight a police problem - there is no problem with fonts and no pre-press error so I'm sure it's just a display problem. Any ideas, what is on or changed guys please? Any help gratefully received...

  Thank you very much

  Rosie

  

  It looks like the highlight of style-override, such noted earlier today in another thread:

  (it was red in some prior versions, but now is cyan)

  Re: IDML - red lines, but no bar

• Em table Oracle forms 9i colocando mode hand (Lock)

  Senhores estou com um problema as estou tentando mapear wave vem a causa e:
  Em some momento uma image bem utilizizada esta com um Lock TM mode or seja bloqueando Share becoming a para toda image update, insert delete e...
  I have 4 options than ones com essa image e our 4 todos are com forms a primary key coluna setada na... real property para...
  O that deve ter of wrong nesses form para esse tipo locking acontecer?
  TEM algo as devo olhar a but?

  the user can retrieve all the records?
  When you retrieve a change request no matter what field the same block, function element table or not of the same block?
  If Yes this block all records, perhaps Oracle think is most effective locks all the table

• Table filters break when using of text with the words "AND" or "OR".

  With the help of JDev 11.1.1.3.0
  
  Hello-
  
  The filters in the table seem to treat the words 'and' and 'or' differently when they are used in the filters in the table. Is it possible to change this behavior? I have a few sets of data where these words appear in the data. When the user performs a search on the data and uses the words 'and' or 'or' the filter no longer works. (He returned lines nil or returns all the rows.)
  
  Test case:
  
  1 create a filterable unalterable for the resources table. DEPARTMENTS table.
  2 set the Department name column to be case insensitive in its filtering:

                <af:column sortProperty="DepartmentName" filterable="true"
                           sortable="true"
                           headerText="#{bindings.DepartmentsView1.hints.DepartmentName.label}"
                           id="c2" filterFeatures="caseInsensitive">
                  <af:outputText value="#{row.DepartmentName}" id="ot4"/>
                </af:column>

  3. run the page.
  4. in my HR. Data REPRESENTATION, there is a service with the name "control and credit." In the service name filter, type
  a. 'control' and press ENTER - service of "control and credit" only comes
  (b) "control and" and press ENTER - only 'control and credit' Department appears
  c. 'control and credit' and press ENTER - ZERO departments appear.
  
  5. the Test cases for "GOLD". In the service name filter, type
  a. 'or' and press ENTER - displays all departments.
  
  
  I tried a few other words SQL in the filters but only 'AND' and 'GOLD' seems to break things.
  Is this a known bug?
  Is there a solution?
  
  Thank you for reading my question

  The list of documents http://docs.oracle.com/cd/E21764_01/web.1111/b31974/web_search_bc.htm#BABCCBCF 'AND' and 'GOLD' as 'Operators of Query-by-Example search criteria' are not text but the operators.
  You can try to join the text in the filter with single or double quotes and see, is that it treads in the form of text.

  Timo

• Rows in the table is empty when you import Excel

  Each month, I need to import Excel spreadsheets into an HTML page 'Nine', before you paste the part of the text in an existing page.

  Part of my procedure is to remove the outside (with data) lines on the worksheet prior to importation.  In design, the display, I import it seems to work and each resulting table has just the right number of lines. Then I do some find and replace, and copy the code I want in the existing page in Code view.

  When I change code mode, I find a lot of empty lines (with the same number of cells, such as active lines) in each set of active lines I pasted.  Because of the amount, withdrawal of these code view is time and frought with error (I could delete the active lines in the next game).  I think this artifact has started when I upgraded to CS5 in CS3.  Is there a way that I do not have these lines? If this isn't the case, could set the agenda so that the number of lines in code view corresponds to the number in design mode?

  Hello Terry,

  Without worker point I copy and paste about 23 rows of 8 columns of 5 different pages in Excel 5 different tables in DW5.5 every week.

  Honestly, it takes less than a minute for each is in a total view of 2.5 minutes.

• HP Z420: Turn off the flashing light blue when in mode 'sleep'

  The blue light on the front of this workstation mode 'sleep' is very bright and very Bill. I'm worried, it's to keep my dog to enjoy a good night's sleep to to have resorted to turning off the machine.

  I enabled / disabled ' Unique sleep state Blink Rates "in the bios, but it does not solve.

  Is it possible to turn off that light during the day before?

  I can put the Ribbon above but would prefer a more elegant solution :)

  Kind regards

  SM

  I talked to a representative from HP support via chat that says that it is not possible to disable the flashing mode 'sleep'.

• Satellite C660 - 1LTD Strange grinding / vibrating noise when I watch videos

  Hello

  I'm new and I have a laptop series Satellite C660-1LD.

  Sometimes when I watch videos, there is a short sound of a noise and the best way to describe a vibration, grinding noise. The noises are not persistent, they come in short explosions.

  Sorry for the wrong description.

  Please can someone help?

  I'll be happy to give you any information you might need.

  > Grinding not strange all sounds far more

  Thanks for your comments and good to know that solve you the problem.

• Training app works when airplane mode is selected?

  Well, that's the question. Fact the watch loses most of the features similar to an iPhone when it is in airplane mode?

  Hi Bruce

  The app of training can still be used when Apple Watch is in Airplane Mode (and the activity app also continues to operate).

  When estimating the results of any training registered during this period, the watch will rely on its own sensors, because it will be impossible to access additional data that might otherwise be available from the paired iPhone (for example information of distance and speed calculated through location Services / GPS).

• How to turn sound when switching mode sleep?

  Hello

  I got my 13 edge two days ago and have now installed all updates and upgrade the BIOS (how can this amount of updates it will take a new PC? Not surprised a lot of people have problems with their computers...)

  But I can't find out how to make the boring 'BING' when the computer goes into sleep mode. Looked in system sounds and the Control Panel, but I can't. Ether in power options...

  It's embarrassing during the day, but if she wakes up on LAN alert during the night I want it to be QUIET.

  Everyone knows?

  See you soon,.

  johfo

  Power Manager (Advanced mode)-> global settings-> power management options to

  Uncheck "beep when power state changes.

• laptop loses connection w/web when sleep mode is activated.

  When my laptop goes to sleep, I get an error msg "windows cannot display Web page" when I wake up it. Troubleshooting problem is says cannot find a problem or "dns server is not responding. laptop usually functioning normally afterwards. Why my computer laptop do?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that this laptop loses the Internet connection in mode 'sleep'. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

   

  1. what operating system is installed on your computer?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Please follow the methods and mark the question below:

  Method 1:

   

  Follow the steps in the link below.

   

  Network troubleshooting event logs to solve network problems:

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 2:

   

  Follow the steps in the link below.

   

   

  Network troubleshooting event logs to solve network problems:

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Notifications not working when phone Mode standby

  Hello

  I took delivery of my Z3 Compact last month, and overall it is very good. This is completely standard, out-of-the-box, with no apps that affect the system.

  I found a very annoying problem with the Notifications sound when the phone is in mode 'sleep', IE the screen completely black, either due to the function of time-out or when I press the round power button.

  The problem is that no notification not crossed; If I'm expecting an email from work, I constantly to wake up the phone and as soon as the lock screen appears, then do the notifications.

  How can I get the phone to always send a notification sound, even in mode 'sleep'.

  Thank you

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  It seems that you have activated the STAMINA mode in your phone via the settings > power management > STAMINA mode. You can add apps to stay active in mode if you go to settings > Power management > STAMINA Tap mode > active Apps in mode standby.