HPG60-237US repair or reference numbers

Similar Questions

• Pavilion m9417c - FK536AA: search for the reference numbers

  I ran into a bit of trouble trying to find the correct references for parts to repair this specific computer.

  Where can I find product diagrams that show the reference numbers? Is there another method to find the reference numbers?

  Thanks a lot for any assistance!

  Hello:

  Here is the list of HP PartSurfer replaceable components in your PC with their corresponding reference numbers.

  http://PartSurfer.HP.com/search.aspx?SearchText=FK536AA

  As you can see, most of them is no longer available at HP, so you'll have to find them on the secondary market.

• Satellite A200 - Question on the reference numbers

  I have a Satellite A200-221 (PSAE3E) motherboard is faulty. I sent him the public support of Toshiba and they confirmed that the motherboard is faulty and I had to buy a new one. It was too expensive, so I don't let them fix my laptop.

  Now, I've seen on ebay a motherboard which is the model that I need (THE ILHAM - 3481P) but I don't know if it fits, because the part of the processor number is not the same as mine. Mine is K000058130. Card mother eBay is K000057340.

  Which replace Council mine perfectly faulty motherboard?

  Thank you!

  Hey,.

  I'm a little confused about your ad Mr. why you speak a number of CPU if you need a new card of mother?

  In any case, here it s a user forum. This means that you can speak with normal people like you and me here. These questions about reference numbers can be answered to an authorized service because they have access to all the databases of Toshiba.

  Check this box!

• Need help deciphering reference numbers Cisco 1841

  Hello

  We have a customer who is internested in 1841 series router.

  We need explanations on the various references to this router. In particular:

  Safety boots

  CISCO1841-SEC/K9

  1841 security Bundle, Adv.Security, 64FL/256DR

  CISCO1841-HSEC/K9

  1841 bundle w/AIM-VPN/SSL-1, Adv. IP Svcs, 10 SSL lic, 64F / 256D

  CISCO1841-T1SEC/K9

  1841 security Bundle w / WIC-1DSU-T1-V2, Adv.Sec., 64FL, 256DR

  What do all those acronyms in the reference numbers?

  What is K9?

  Includes a wic T1 with T1 inside part number? If yes ddo other part numbers just include a WIC ethernet for broadband cable/DSL connections?

  -Thank you

  Brian

  Hi Brian,.

  Can you please post this question on the Netpro forums?

  Thank you very much

  Marcos

• Align the reference numbers

  Greetings,

  I was wondering if there could be a way to align the reference numbers, possibly all to the right, to align the referenced text. There is a spacing em dash between the numbers and text separator. The extra space has been added after to help align the text better, who has worked for a few notes. However, there are a lot who are looking just as below and probably may be due to melting. Could there be a better way to align the number or the text while maintaining the spacing of em dash? Thanks for your suggestions!

  

  Peter,

  Working as numbered lists notes! Use the tab here (to be defined in the global Notes options) and Grep!

  

  (^/)

• Align the reference numbers to the left

  Hello

  I am currently designing the thesis of my sister. -Any word - text several notes. The problem is when I put the word document, reference numbers were automatically aligned to the right. My sister would rather have on the left as if it were in a word document.

  How would I be able to change right to left footnote reference numbers? (see also image attached, circle green).

  Another question not directly related to InDesign, but general layout: is 2 mm 'minimum space before first note' enough in this type of publication, or what is the General distance taken for this?

  

  Thanks in advance

  You are using a version of ID with the support of the text from right to left? It seems that this might be the case, and you need to change the orientation of the text in the style specified for the notes.

• Reference numbers Windows Photoshop CS6 v2

  It is AP 65158494

  http://www.amazon.com/...ftware-Windows/dp/tech-data/B007YCXQ4O/ref=de_a_smtd

  It is AP 65158237

  http://www.amazon.com/... & qid = 1348237059 & sr = 8-1 & keywords = 65158237

  Anyone know the difference? All that I can see is the price is different. One is perhaps more updated then the other?

  -Thanks!

  jimbofrank,

  It is not kosher to start of the double in a forum discussions.  Your thread, duplicate is barely 10 hours old.  Please don't do that again.

  The first Board is NOT purchase software eBay sellers.

  The LEGITIMATE Adobe Photoshop CS6 is exactly the same binary and the same version, concerning the packaging: full commercial version, upgrade version, educational version or student version.  The only difference will be in the license and the price you pay, but only when you purchase legitimate copies directly from Adobe or from an authorized dealer Adobe like Amazon.com.

  Reference numbers vary by license and price, but only if you buy legitimate copies.

  Adobe does not sell different versions of the Photoshop CS6 application, only the different packages for different program licenses.

  Most of software Adobe things sold on eBay is fake, counterfeit or pirated copies.

  You can save two or three dollars if you get an offer from a legitimate retailer, but if the price is very low, it is a scam.

  DO NOT allow a 'room number' guide you.

• Once again on alignment to the right reference numbers with GREP

  For some jobs, I want the reference numbers in the notes align with the period that I have Options of IDCS4 reference Add (with an en space) as the separator between the number of note and the note text.  Not much so I set the paragraph style reference with a tab 'Match point' and then insert this tab at the beginning of the note.  I recently stumbled on this thread of 2009 where RodneyA that describes more in detail, and Eugene Tyson added a GREP search to automate the addition of tab: replace (~ F) with \t$1.

  I can't get this to work in IDCS4.  It worked in earlier versions?  Earlier this year, Jongware explained that GREP can not replace a reference marker, only to watch in front of or behind the marker to replace anything.  Unfortunately, in my notes nothing before the marker reference of GREP replace until I manually put my tab there.  Addition of these tabs to hundreds of notes by hand is not if bad (jumping with Ctrl + arrow keys) and ID's of the propensity to consume a way occasionally note, I need to check all the same.  But I was mistaken in thinking that if I want to automate the addition of tabs I you do this via JSX?

  Thank you

  David

  David, indicating when that you can't get something working, I must also tell you why

  But when I tried your "replace (~ F) with \t$1 ' for me it became real obvious right away: the code ~ F is not only 'the footnote reference number' but also the note itself in the text. So, it all works in the sense that you get a tab before the code of reference number, you get loads of additional tabs in your text as a bonus.

  There are several ways around this. The most obvious is to limit the operation replace all paragraphs in style with your reference style. If it is a single (mine is usually), it will work immediately. It is the first response of Eugene in the previous thread - possiblly you forgot to put this paragraph in the field Format style find.

  Another way is to add a tab only when the code of reference number is the beginning of a line:

  ^ ~ F

  replace it with

  \t$0

  (You're right noticing the trick 'postanalyse' cannot be reversed for an advanced search for just "opening of the line followed by the code of reference numbers". "It's the special flavor of an InDesign GREP Limitation).

  This may fail if you have a note at the beginning of a paragraph

  Still another way is to try to make use of the vertical position of the code reference number. If your references are superscript (which is fairly regularly) and the numbers in the notes themselves are not (that they may or may not be), you can search

  ~ F (+ position: normal)

  and replace with himself more a tab before, as shown above. (A variation would be to use a style of character for referrals by exposing and seek [none] style to pick up those inside notes characters.)

• Adobe Creative Cloud reference numbers

  Hello...

  I am trying to understand what the difference is in the following references:

  65206830Bhas01 to 12

  65206830BC01 to 12

  Is there some kind of guide to decipher the numbers from Adobe?

  Hi Itama58411232,

  After further research, 65206830BA01A12 seems to be a CC for complete teams (CC all Apps) new level 1 commercial seat SKUS under the old staggered pricing (1-49 seats).

  65206830BC01A12 seems to be a CC for complete teams (CC every app) tier 1 Government new seat SKUS under the old staggered pricing (1-49 seats).

  Hope that clarifies.

• I have 2 different styles for the reference numbers and the reference text?

  Hello

  I have a document with a lot of notes.

  I would attribute all reference to a character style numbers and all of the text in a different character style.

  For example, I would like to have numbers in bold and black, while the reference in light and dark grey text.

  Doing this manually is not an option of course.

  Is this possible?

  If this is not the case, is there scripts out there that can control it?

  Thank you

  Federico

  It's easy to do.

  1. A Style of Chyaracter for the reference number of the ridge.
  2. Implement the paragraph for the reference text Style.
     1. Go to the nested Styles section
     2. Select the character Style
     3. Apply it to the first separator symbol specified (as tabulator) you chose when you set up your notes.
  3. Use it. It will apply automatically. Of course, you must choose the paragraph Style reference in the Set Up parameters of reference from the Type menu.

• Reference numbering problems InDesign CS6

  Hey people,

  Having a problem I can't seem to understand. I'm carrying a book with a bunch of references and notes. When I insert the first note, all nice and good works, as long as I am referencing things on the same page. As soon as I move on to a second page with notes, numbers restart themselves.

  Then on page one, my grades 1,2,3. In the text box notes, they are properly referred to as 1, 2, and 3. On page two, I have the notes 4 and 5. When I "insert a reference", the text box down restarts at 1, send me references 1 and 2 instead of 4 and 5.

  In the reference options, "numbers to restart all" is NOT selected. I tried everything, to no avail.

  I am fairly new to inDesign, you can provide any help would be greatly appreciated.

  Thank you!

  The pages are threaded?

• X 1 carbon (2nd generation) reference numbers keyboard

  Hi all

  I unfortunately spilled water on the keyboard of my 2nd gen X 1 carbon and several of the keys no longer work. As it is out of warranty, I expected to buy Lenovo parts and fix it myself.

  Can someone point me in the right direction with regard to the parties, I'm going to need to replace and what are the part numbers?

  Thank you!

  Hello, robwon

  Take a look at these documents:
  https://download.lenovo.com/parts/ThinkPad/x1_carbon_gen2_fru_bom_20150616.pdf - p/ns (FRU) service. Keyboard p/n depends on the readiness and the presence of the NFC

  https://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-X-series-laptops/ThinkPad-x1... -the steps to remove for keyboard

  https://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/x1carbon_2_hmm_en_sp40a26110_01.pdf - more detailed instructions

  https://www.lenovoservicetraining.com/showcase?sid=538&key=TGVuZw== - videos of service

• Orthographic inDesign - ignoring the reference numbers in the tables

  I have a document of 100 pages with several tables.  Each table contains many numbers of different parts, some letters including and others do not.  We do not have any specific format.  Is it possible that I can get the spell check to ignore any word that contains a number in my entire document?  I want to still come out check to check the tables because there are other things other than the numbers of room inside.  I tried using GREP styles to achieve this, but I can't make it work.  Help, please!

  Create a character style that affects the Language of No attribute and apply it to part numbers (use a find/replace query to find them). Does not take into account no. language spell check words.

• Reference numbering in CS4

  My notes keep restarting numbering, even if the "restart numbering each" box is unchecked. Any ideas as to why he made this (and how to fix it)?

  You use more than one story to your statement text?

• IStore order Tracker reference numbers

  Does anyone know what represent numbers in iStore order Tracker? It is column in the oe_order_headers_all table: source_document_id.
  
  Thank you.

  IF (ORDER created from iStore) then
  oe_order_headers_all.source_document_id = aso_quote_headers_all.quote_header_id

  I hope this helps.

  Thank you
  RK
  925-998-1494
  Techno consultant of Func.