HTML export: why are my images at the end of the document?

Similar Questions

• Why are JPEG images on the hard drive of my computer all of a sudden now Virgin?

  JPEG images on the hard drive of my computer are now white (it reads 0kb and the tile is missing) and when I go to open it in Windows Photo Viewer, it gives me an error saying that there is not. I noticed that it happens to almost all of the photos that I have edited in Lightroom 5. I shot an entire season of football last year, all in JPEG format and with my guards, I advanced and edited in Lightroom and now they are virgins. I never moved my photos anywhere. I turned the game in November, created the folder for this game, and that's all. I'm almost a year more later to print them for my portfolio and the file is missing! Lightroom can show the photo, but I can't make adjustments in the develop module because the file is blank on my computer. The weird part is that the sticker is there, the number of correct image is there, and when I click to display in the Explorer in Lightroom, it pulls up the JPEG right, if the location is OK in Lightroom, just no thumbnail image and no image size when I go to open it using the Windows Photo Viewer. I checked the other games that I shot and it's happened to almost all games.

  If you have pictures on your camera cards, then of course you can simply copy them to the appropriate locations.

  There are plug-ins in Lightroom that can recover the preview using Lightroom, but these will be smaller and lower in quality than the original. Perhaps one of our plug-ins experts can suggest the good plug-in.

  If the hard drive goes really wrong, as I suggested, you definitely want to be replaced. If this is the case, you won't continue to use it. You might want to run some diagnostic disk on this subject.

• Why are they not all the photos on my phone on icloud?

  Why are they not all the photos on my phone visible on icloud?

  You have settings > iCloud > iCloud library turned on in the phone? Since how long you turn on this setting? Have you been connected to wi - fi? How many photos is on iCloud and how much is missing?

• Why are case-sensitive in the wrong place?

  Why are case-sensitive in the wrong place after conversion?

  If you want Acrobat to replicate your results, you must either use a program layout (as Design) or select the Adobe PDF printer in the print of your application menu before making your layout. Most processors redistribute the document based on the printer which is attached (i.e., it uses the settings of the printer). If you change the printer so that in WORD for example, the layout in WORD can change radically. This is what happens when you use the Adobe PDF printer. This isn't a question of Acrobat, but a word processor.

  MS out of printer settings in WORD with the first version of OFFICE 2007, but it seems to be back on by default. I guess they found, there was reason to leave it on (the box is buried in the menu options in WORD). This aspect of reflow is one thing that creates major problems for developers of WORD forms of WORDS. Depending on the machine, the shape may ebb and part go to the next page if not careful (I've had these types of forms before, particularly where people are trying to learn a lot on the page).

  Neither one of us know if we have answered your question because you give enough information to be able to tell. The key for almost any application is to change the printer to the Adobe PDF printer before you do business with any document. On my laptop, the Adobe PDF printer is the default and modify other printers if I happen to be connected to them.

• How to add png images in the document?

  Hi, I need to add images in the document. Currently I am placing them with the PlaceFileInFrame function. But this function creates links to the images. I could integrate this links later, but I would like to know how to add images (png, bmp,...) in order to document without making links. Also, I would like to know if it is possible to create links to images stored in the web (http, https)? Looks like the answer is 'no', but maybe I'm missing something. Thanks in advance!

  I guess that you are above InDesign CS4.

  After you have placed the image, you should incorporate it.

  You should do: ILinkResource::Embed

  Check ILinkResource::CanEmbed before you embed it.

  There are several ways to find the ILinkResource of pageItem UIDRef.

  Consider the following:

  Get the ILink for your UIDRef page element, and then find ILinkResource of ILink.

  Look at the ILinkManager, ILinkUtils.

  InDesign does not support file-based links. In other words, it doesn't support file:// model.

  However, InDesign offers extensibility to create an image of a document for the web link.

  To do this, you should have your custom link put in work.

  You can see CustomDataLink SDK samples to understand how to do this.

• After update to Acrobat 10.1.5 older documents are rejected. Error: the document is damaged.

  After the update to Acrobat 10.1.5 older documents are rejected. Error: the document is damaged and cannot be repaired. Is there any help?

  The file actually has a problem, we have published a document explaining the problem and a workaround:

  http://helpx.stage.Adobe.com/Acrobat/KB/PDF-error-1015-11001-update.html

  Please try and let us know if it works for you.

• Automate the exchange of two images in the document.

  Good afternoon! A friend here can direct me to a nice script to automate the exchange of two images in the document, E.g.: when you select two layers A and B would look like this: picture A to picture B by changing the image B for the "Inversion of images' image and, if possible, keep the same report. Thank you!

  I found an old version that I changed and now it works with CS5 and CS6 lets hope it work in CC.

  Wikisend: free file-sharing service

• Why pdf images are blacked out when the document is downloaded?

  When I download a PDF file from the internet, many of the graphics are blacked out.  In some cases, this seems to happen when it is shading.

  I can usually get rid of the black areas by selecting and delete using the Acrobat X image editor.  We then see the underlying image.

  Just to be clear, this is not a question of being blocked by the author of the images.

  Why is this happening?  Any ideas would be appreciated.

  Finally, I found that the solution is to disable 'replace the colors in the document' in the preferences - accessibility.

• Why are my images in my fuzzy site on my phone?

  Hello

  When I export my site and watch on my phone, all the images are blurred. I tried to make the images of the actual size in photoshop, save to web format and devices and save them as png files. It does not work. I really want to solve this problem, because it's for my portfolio site. Any help would be greatly appreciated.

  Please see these similar topics:

  My images blurry when I export or publish my site of Muse. Why and how to fix it?

  https://forums.Adobe.com/thread/1281055

  Thank you

  Sanjit

• Why are there seven of the process called "conhost" running?

  I've seen other questions like this, but each answer or solution that they give to the user just won't work for me. My problem is that in "Task Manager" under the "Processes" tab there are about seven of the process 'conhost.exe' running, and when I click 'End process' to each other, they reappear in less then a minute. Another process that is open is "taskhost.exe" and there are about four of them running. In this photo that I took, I would like to know why everything I put in a box is running. He also says that Notepad is open when it isn't. Every detail is that it is still open even when I restart my computer.
  

  The picture is not very clear, and the Description list should be expanded to read the full text,

  But what I can make out...

  - cmd.exe - would be Windows command prompt, which looks like you've opened twice (or maybe are

  in the process of running in the background?).

  - conhost.exe - Console window host (which is what you'll see with the extended Description) has to do with the console Windows (command prompt). It is a "fix" to the command line that allows to cut and paste.

  If two of them would have to do with the open cmd prompt.

  If you R / click each entry and select open file location it brings you to the System 32 file.

  -Re - open after you finish the task it is dependence and interaction of other processes.

  -If the machine is on a network, the other conhost.exe can reflect what's open on these machines.

  -Some Services also to open up other instances of conhost.exe.

  -However, it's the short story. Apparently, there are many other programs that use conhost.exe

  and it's another companion, csrss, but to find them all would take time and research.

  - Notepad - which I guess you have open.

  Taskhost - tasks of four windows running

  -Restart Windows can decrease the number of conhost.exe "opened", unless you have the startup programs

  loading in the background that use this process

  (type - msconfig - in the command run - click in the Configuration of the system at boot).

  You can also try from the clean boot and comparing what processes still work in this State.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  .

• Why are my images not display correctly in CS6?

  I have a laptop Vista (old)... only 4 GB of memory; slow; small screen; etc.  It is simply not a good environment for image processing.  I bought this laptop in particular because it fits in my backpack when I travel.  I have almost never use Photoshop on this computer, but when I did there is no problem.

  I just uninstalled CS3 & installed CS6.  Now the images display incorrectly on the screen.  They show as completely transparent, just "Articles" of the image or perhaps even of the "sections" of the different layers.   Looks a bit corrupted images (when it is not completely transparent).  The layers palette shows the thumbnail.  If I move my mouse, the image & click the 'bar' just above the superior rule will appear until the mouse button.

  Would it be because preferences are not set correctly?  I didn't change the default values.

  

  

  You probably have many questions with this old computer. I doubt that the graphics card can handle CS6. You can enable the processor graphics to use in the preferences running, or is it gray? CS6 does not work well on XP and Vista is even older. I seriously consider getting a new laptop. There are many nice small ones that fit into backpacks with fast SSD drives.

• Why movieclips, buttons & images on the stage literally disappeared when run.

  I'm really noob in AS3.

  I had the design of clips and other places on the stage.

  And I got 1 framework for the code below.

  Some clips will be visible and not visible, sometimes while loading external swf files.

  I think that its on the clips to be dynamically on the stage.

  Error output:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  at main4_fla::MainTimeline/advantanMCs() [main4_fla. MainTimeline::frame2:141]

  to Function / main4_fla:MainTimeline/launchSWF/main4_fla:onLoadCompleteHandler() [main4_fla. [May nTimeline::frame2:46]

  Here is my code:

  import flash.display.MovieClip;

  import flash.display.Loader;

  import flash.net.URLRequest;

  to import flash.events.ProgressEvent;

  import flash.events.IOErrorEvent;

  import flash.events.Event;

  var swfList: Array = new Array ('1.swf', '2.swf', '3.swf', '4.swf');

  var container: MovieClip = new MovieClip();

  var currentSWF: MovieClip = new MovieClip();

  var swfNo: number = 0;

  function launchSWF

  function launchSWF (swfBox, swfFile) {}

  swfLoader var: Loader = new Loader();

  var swfURL: URLRequest = new URLRequest (swfFile);

  swfLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, onProgressHandler);

  swfLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, onLoadCompleteHandler);

  swfLoader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, onIOErrorHandler);

  swfLoader.load (swfURL);

  function onIOErrorHandler(event:_IOErrorEvent):void {}

  trace ("file not found!" swfFile + event);

  }

  function onLoadCompleteHandler(event:_Event):void {}

  trace (swfFile + "loaded file.");

  swfBox.removeChild (preLoader);

  swfBox.addChild (swfLoader);

  {If (swfFile == {swfList [0]})}

  swf1MCs();

  currentSWF.x = 247.45.

  currentSWF.y = 251.45;

  {} ElseIf (swfFile == {swfList [1]})}

  swf2MCs();

  currentSWF.x = 62;

  currentSWF.y = 199.50;

  {} ElseIf (swfFile == {swfList [2]})}

  swf3MCs();

  currentSWF.x = 132.50;

  currentSWF.y = 225,50;

  {} ElseIf (swfFile == {swfList [3]})}

  swf4MCs();

  currentSWF.x = 62;

  currentSWF.y = 226.50;

  }

  currentSWF = MovieClip (swfLoader.content);

  currentSWF.gotoAndPlay (1);

  currentSWF.addEventListener (Event.ENTER_FRAME, checkLastFrameHandler);

  function checkLastFrameHandler(event:_Event):void {}

  trace (swfFile + "is the image of '+ currentSWF.currentFrame +'.'");

  if(currentSWF.currentFrame == currentSWF.totalFrames) {}

  currentSWF.stop ();

  removeSWF();

  }

  }

  function removeSWF(): void {}

  swfBox.removeChild (swfLoader);

  currentSWF.removeEventListener (Event.ENTER_FRAME, checkLastFrameHandler);

  trace (swfFile + "deleted.");

  launchNextSWF();

  }

  }

  var preLoader: loader = new loader();

  {If (swfFile == {swfList [0]})}

  preLoader.x = mc1Frame.x / 2;

  preLoader.y = mc1Frame.y / 2;

  {} ElseIf (swfFile == {swfList [1]})}

  preLoader.x = mc2Frame.x / 2;

  preLoader.y = mc2Frame.y / 2;

  {} ElseIf (swfFile == {swfList [2]})}

  preLoader.x = mc3Frame.x / 2;

  preLoader.y = mc3Frame.y / 2;

  {} ElseIf (swfFile == {swfList [3]})}

  preLoader.x = mc4Frame.x / 2;

  preLoader.y = mc4Frame.y / 2;

  }

  swfBox.addChild (preLoader);

  function onProgressHandler(event:_ProgressEvent):void {}

  var dataAmountLoaded: number = event.bytesLoaded / event.bytesTotal * 100;

  preLoader.bar.scaleX = dataAmountLoaded / 100;

  preLoader.percent.text = int (dataAmountLoaded) + "%";

  trace ("preLoader:" + preLoader.percent.text);

  }

  } / / end of launchSWF

  function launchNextSWF() {}

  trace ("launch of the next");

  If (swfNo < (swfList.length - 1)) {}

  swfNo ++;

  trace ("Now Playing" + swfNo + "swf");

  launchSWF (container, swfList [swfNo]);

  } else {}

  trace ("at the end");

  }

  } / / end of launchNextSWF

  put on stage

  addChild (container);

  launchSWF (container, swfList [swfNo]);

  mc swf1 behavior

  function swf1MCs() {}

  mc1Frame.visible = false;

  mc2Frame.visible = false;

  mc3Frame.visible = false;

  mc4Frame.Visible = true;

  headerBg.gotoAndStop("1");

  mc1MC.gotoAndStop("1");

  mc2MC.gotoAndStop ("default");

  mc3MC.gotoAndStop ("default");

  mc4MC.gotoAndStop ("default");

  }

  SWF2 mc behavior

  function swf2MCs() {}

  mc1Frame.visible = false;

  mc2Frame.visible = false;

  mc3Frame.visible = false;

  mc4Frame.Visible = true;

  headerBg.gotoAndStop("2");

  mc1MC.gotoAndStop("2");

  mc2MC.gotoAndStop ("default");

  mc3MC.gotoAndStop ("default");

  mc4MC.gotoAndStop ("default");

  }

  swf3 mc behavior

  function swf3MCs() {}

  mc1Frame.visible = false;

  mc2Frame.visible = false;

  mc3Frame.visible = false;

  mc4Frame.Visible = true;

  headerBg.gotoAndStop("3");

  mc1MC.gotoAndStop("3");

  mc2MC.gotoAndStop ("default");

  mc3MC.gotoAndStop ("default");

  mc4MC.gotoAndStop ("default");

  }

  SWF4 mc bahavior

  function swf4MCs() {}

  mc1Frame.visible = false;

  mc2Frame.visible = false;

  mc3Frame.visible = false;

  mc4Frame.Visible = true;

  headerBg.gotoAndStop("4");

  mc1MC.gotoAndStop("4");

  mc2MC.gotoAndStop ("default");

  mc3MC.gotoAndStop ("default");

  mc4MC.gotoAndStop ("default");

  }

  I kinda stuck with the code. Much of the code I got from a blog I think useful for what I'm working on.

  One thing that bothers me, is that I movieclips, buttons and images on the stage literally.

  When I decide to enter the movieclips disappeared.

  Any help is appreciated.

  The first line in an error message reference is the closest to the problem.  All the others are right along the processing chain, so line 141 is where you need to focus.

  If you get the error 1009 for this line, it is indicating that the mc1Frame object does not exist for which is that the code is... you don't see this object as being present.

  This may mean that the object...

  -is declared but not instantiated

  n ' is not have an instance name (or the name of the instance is misspelled)

  n ' is not in the frame where this code tries to talk to her

  -is animated in place, but is not assigned the name of the instances of each keyframe for her

  -is one of the two or more consecutive keyframes of the same objects without a name assigned in the image previous (s).

• Why does not display the image in the document window?

  I'm a Photoshop CS5 begI tried to pick up what I need to click on the button. I can see the name of the document in the window, but there is no image to display in the window. Get bit frustrated. Help, please.

  Thank you.

  The document is 100%, so I think it's another driver to map video to date with a bug.

  Go to the one indicated on the web site GPU (or Microsoft, or system manufacturer) and search for updated drivers.

• WHN I copy and [aste one word document in my email to send the document to someone I lose the clipart and images of the document.]

  Why my image used clipart and images are sent with the document?

  Hello Sarahaa1,

  Thank you for your message.  Which application you use for email?  Are you able to you or have you added the Word document as an attachment?  Clip art and images remained on the document?
  Please let us know so that we can better help you get this issue resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How to enlarge all images in the document using a script?

  Hello

  I used the script ImageCatalog to place a 1000 + images of different dimensions in the document. In the ImageCatalog dialog box, I unchecked the proportional and the frame option content to place images at 100%. I'm looking for a way to extend all the frames graphics to reveal images that he placed on the document. When you double-click the bottom right handle, will expand the framework to see all the content. (it would be your time when you do this one by one)

  Let me know. Thank you very much.

  If I understand you correctly, you have placed images without using frame to adapt to the content and that you now try fix this? Do you find that a fair executives greater and, at this point, can do their overlap others? If this is going to be a problem, just run the script again but this time with the correct settings...

  In any case. Typing on my iPad so I can't check. but something in the lines of

  g = app.activeDocument.allGraphics;

  for (i = 0; i

  g [i] .fit (FitOptions.FRAME_TO_CONTENT);

  See http://jongware.mit.edu/idcsjs5.5/pc_Graphic.html#fit