Why are there seven of the process called "conhost" running?

Similar Questions

• Updates are not available because the process is not running

  On YouTube, I get a message that "updates are ready for Vista".  I tried to go to "updates" through Windows, but I get a window that says "updates are not currently available because the process is not running". "You may need to restart your computer.  The box has a red shield with a white cross in it.

  Hello

  What do you mean when you say that you get a message in YouTube?

  I'd like you to try the answer from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-Update-service-is-not-running/a2f7bd08-5f24-4DFA-818B-78ed2aaa48c8

  Thank you.

• Why are there differences in the symmetry on Ipad or Windows? (for sketchbook express)

  On windows (area 3) I can select x and y of symmetry and symmetry of Ipad version as a single axis. Is it possible to have two axes on Ipad?

  It will be the pro on the ipad version?

  Sketchbook Express and Pro are actually made by Autodesk, Adobe not.

  That being said, Sketchbook Pro is an interesting application; I used it for a month or two, since Adobe took the ol' "* shrug * maybe we'll get around it, if we feel like it"line regarding the development of an Android version of the sketch. "

  Since it is an Adobe forum, you probably better off asking more from Autodesk.

• Why are there no end process in the Task Manager tab.

  Why are there no end tab process in the Task Manager because it usta be a on windows xp, that makes it eaiser to end a game if you do not want it to start. In addition, some games when you exit out of them sometimes play on words to say (on steam) is currently unavailable. That when I try to log out of steam to get the game to work again, he says "game works must end game before disconnection which is the process you need to put end to which you can't because there is no process tab.

  Hi dontknopass,
  
  a. what game you try to play?
  b. did you a software or hardware changes recently?
  c. normally, you should get a process in the Task Manager tab, end process tab is located at the bottom of the Task Manager window.
  
  Method 1.
  If you think that any activity of virus that I highly recommend to run the Virus Scan.
  I recommend you to run online Virus Scan to remove any infections, as appropriate.
  Follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  The following thread discusses the removal of viruses and malware online:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42
   
  Method 2.
  Let us see if we can get into safe mode, we can perform a clean boot for troubleshooting.
  Please check if you are facing the same question when working in safe mode.
  Step 1 Mode safe
  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  6 do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step 2 clean boot
  If you have the tab process end in safe mode you will need to perform a clean boot to find the program that is causing and then disable or remove.
  Here are the steps to do:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why are there people tecsavy call me to get money for my microsoft programs I already bought with my computers and they crashed my good computer

  Why are there people tecsavy call me to get money for my microsoft programs I already have bought with my computers and they crashed my good computer, I am a stay home Grandma take care my 3 grandchildren, they wanted 300. for my computer with windows vista and now they want 190. for this computer, why microsoft would let people do such things

  s7cwa7

  Hi Julie,.

  Microsoft has none of the unsolicited telephone calls to help you fix your computer. You can consult the following documentation to learn more about the same.

  Avoid phone scams | A cybercriminal Tech Support Scam | Security threats

  Fraudulent emails and credit scam advice cards | Microsoft Security

• Why are there not file prefetch for Thunderbird in the \Windows\Prefetch folder?

  Why are there not file prefetch for Thunderbird in the Windows XP SP3 \Windows\Prefetch folder? I use Thunderbird 38.3.0.

  I deleted all the files in the \Windows\Prefetch folder and noticed that no files have been created it there for new programs began. I restarted the Task Scheduler service and the problem was solved.

• Why are there bars when I go to the YouTube app?

  Why are there bars when I go on the YouTube app, I'm on it and I start a video and there are bars on the bottom and top of the screen, you can solve the problem?

  There is nothing to fix. If the video was recorded in an aspect ratio different that what is the screen of the phone, the difference is filled with back. You can sometimes see the same thing on TVs.

• What is the difference between vmware.log vmware - 1.log, vmware - 2.log... Why are there different logs created

  Experts of HI, need some advice what is the difference between vmware.log vmware - 1.log, vmware - 2.log... Why are there different logs created. I understand the vmware.log is to check when the VM not suite or something, but not sure the rest feed files. Thank you

  Log files are rotated once a virtual computer is turned on or when the file reaches a certain size. The vmware.log (without number) is the current log file. By default, the old files are kept for purposes of troubleshooting. You can - even if I do not - recommend disable this behavior, or even configure the virtual machine to do not create the log files at all.

  André

  PS: I forgot to attach the KB article: http://kb.vmware.com/kb/8182749

• I had a serious accident by using Muse, said the notice of accident, as well as the demand for documenting my recent movements, "whoa - why are there so many reminders? The only way out is a Force Quit. I'm on a mac

  I had a serious accident by using Muse, said the notice of accident, as well as the demand for documenting my recent movements, "whoa - why are there so many reminders? The only way out is a Force Quit. I'm on a mac

  Hello

  Could you please check the thread below and see if this is the case with you

  Re: MUSE CRASH

• 2 questions: why are there no "forum" for Ad Premiere ELEMENTS? And: HOW to EXPORT (with Prem 13,00) to COMPUTER VIDEOMATERIAL WITHOUT ANY LOSS OF the ORIGINAL DV or ANALOG VIDEO-QUALITY (inasmuch as I get - to start - an endresult SMALLER!)

  2 questions: why are there no "forum" for Ad Premiere ELEMENTS? And: HOW to EXPORT (with Prem 13,00) FOR COMPUTER VIDEOMATERIAL WITHOUT LOSS OF the ORIGINAL DV or ANALOG VIDEO-QUALITY (inasmuch as I get - to start - an endresult SMALLER!)

  Thank you, Ann. I'll move it.

  Kind regards

  Kevin

• A correlation must be established at the level of the process calling or called?

  In the Oracle BPM Suite 11 g: advanced topics of BPMN book, the authors wrote:

  When you use the message-based correlation, don't the called process must be aware of the correlation, the appeal process. The runtime will take care of the details for the calling process, you don't need to include details of correlation in the process model for the calling process.

  In the called process, you must include the definition of correlation set and specify the tasks or events appropriate to use correlation. Let's look at an example in the following diagram:

  In the example above, the authors introduce a correlation on the called process.

  

  However, documentation of Oracle on the correlation, the typical design for correlation flow mentions that the correlation is initiated by the sender of the message, as shown below.

  1 design processes that communicate with each other.

  2. in the calling process, add the stream object that sends a message to the other process.

  3. define a correlation to the stream object that sends the message and configure it to initiate the property aliases.

  4. in the called procedure, add the stream object that receives the message.

  5. configure the stream object that receives the message using the correlation you defined and assign a value to the property alias.

  I also found this article - work with Custom correlation in Oracle BPM Suite 11 g, in which the author gave 2 examples of correlation in a taxi booking process. In these two examples, the author has also launched the correlation on the sender of the message.

  In the same section in the book, the authors also wrote:

  You need not set properties of correlation on the outputs of the process, for example, his task to send, or any nodes (message) or throw the message events. Only the entries have correlation properties.

  I would be very grateful if you could help me with the following questions:

  1. When is the right time to launch a correlation of the receiver / called process side?
  2. How the calling process can decide that the answer message he receives come from what conversation if the calling process is not the man who hired the conversation?
  3. Regarding the last quote, is there something wrong if I define a correlation on the output to send to a specific process instance?

  After spending some time more twisting my brain, I think I got a better understanding of the correlation now. Please correct me if I am mistaken on all parties. It is important to me.

  Where and when to define the correlation depends on 2 rules:

  1. Who needs conversation?
  2. Who is 1st to 'talk' in the conversation?

  There are a few scenarios that can occur:

  1. Only the called process needs a conversation.
  • This scenario has been well illustrated by Arun Pareek in his blog - working with Custom correlation in Oracle BPM Suite 11 g, in which he created a process for the taxi booking. As shown in the image below, there is a subprocess embedded to cancel a reservation. In this case, when another part of the system (process BPEL, BPMN process, etc.) sends a message "Cancel booking" in this process of 'CabBooking', he cares not the conversation. It is the process of 'CabBooking' who needs conversation in order to correct one of its instances running unreserve. The system of 'other', it's just a normal service with the ID of the booking must be cancelled.
    • 
  • Commercially, this kind of procedure should be the case for most popular use for correlation. Technical side, this is where Mark Nelson is correct. As only the called process needs the convesation, the calling process has no need to be aware of the correlation. According to rule 2, it is clear that the activity of "Booking request" is the place to initiate the correlation, as has been done by Arun Pareek in his blog. Subsequently, the "cancel booking" activity can make use of this initiated correlation.
• Only the calling process must a conversation.
  • This scenario was presented by Mark Nelson in his book - Oracle BPM Suite 11 g BPMN topics advanced, in which he had 2 processes: process a to calculate a square of a number and process B to submit the number of input in the process a as shown below. In this example, the correlation was launched on the 'send task' B and used by the task "receive" B processes processes. In the process, he doesn't care the conversation; his only responsibility is to calculate the square of the number of input. It's the process B who needs conversation in order to map the correct response to the Service call message.
• A.
• B.
• Technically, the motivation for this scenario is usually the case in which the called process is a reusable service that does not support WS-addressing. Generally, within the Oracle stack, as WS-addressing is supported, simply use the default conversation without having to manually create correlations. On the business end, one of the reasons for having such a correlation are to ensure that there is only one instance of execution with a special at any time correlation key. For example, for procedure B, it is not possible to have 2 instances with the same number of entries as the correlation key. After the 2nd rule, it is easy to know where to start the correlation - the activity of the 'task to send' process B.
• The appeals process and need a conversation.
  • This scenario is also confirmed in blog Arun Pareek. In the 'Get booking availability' embedded sub-process, he throwed a 'send booking confirmation' signal and then took in the primary process to the activity of «Get answer of Confirmation booking»
. In fact there are 2 ways to implement correlation in this case.
• 
  • Assuming that no correlation has been created in the process of "Taxi booking" (ignore the use case for "Cancel booking" above), sequel to the 2nd rule, as the "send Booking Confirmation" is the activity 1 to join the conversation, this is the place to initiate the correlation, as has been done by Arun Pareek. Subsequently, the 'Booking Confirmation Response Get' will make using the correlation of insiders.
  • We can push this scenario 1 scenario - "only the called process needs a conversation", by launching the correlation directly on the first activity, "Booking request", "cabin booking" in the process of. Using this approach, the 'availability reservation get' subprocess embedded as well as any other external processes that need to communicate with the 'Cabin booking' process will not be aware of the conversation. In this case, all the 'other' process is enough to call a favor. Correlation initiated on the 'Cabin booking' process will take care of the rest.
  • The 2nd approach should be the best practice, because it helps ensure that the correlation is initiated in only 1 place - the 1st activity of the process called and reused by anyone.
• Subprocess multi-instance incorporated.
  • This scenario was presented by Mark Nelson will use a process C, which is a sub-process multi-instance incorporated, to call multiple service to the process above. In this example, the correlation was launched on the 'task to send' C process and used in the 'task to receive' C processes. Once A process has no need to be aware of the conversation. In addition, a conversation of scope must be defined inside the embedded sub-process.
    • 
  • The reason why the correlation must be initiated the calling process is because only one instance of the calling process is several service call to the same process in parallel at the same time. On arrival, the calling process response messages must know what answer message is requiring the Service. Again, within the Oracle stack, as WS-addressing is supported, it is sufficient to use brought the conversation without having to manually define correlations.

This is how I understand the correlation at this stage. Please let me know if I misunderstood something.

Thanks a lot for your help!

• Why are there no films nigerians iTunes Store?

  Why are there no films on the iTunes Store of nigerian?

  Availability of movies in different countries is decided by the film producers, not by Apple, so the only answer we can give is that the owners have not yet decided to make them available.

• Why are there no set upward for IPad etc.?

  Why are there no set upward for IPad etc.?

  Firefox Home for iPhone also explains the situation. Unfortunately, Apple will allow Firefox on iOS, so we cannot release him.

• Configuration of backups from iCloud drive: why are there two Mobile Documents files?

  I've recently started using iCloud drive to synchronize documents between my Mac and iOS devices. Now, I want to assure you that I have local backups of these documents.

  I understand that the documents synchronized via iCloud are store locally in my Mobile user home/library/Documents folder. But when I check I made 2 folders: Documents Mobile and Mobile Documents.90391253.  The Documents Mobile folder seems to keep all the records that I created using Pages, drafts and TextEdit.  The second folder has files with obscure names such as ' JFJWWP64QD ~ com ~ goodiware ~ GoodReader. ". Records of Documents that I checked are empty.

  Here is a screenshot of the second folder:

  

  Why are there two folders of Documents Mobile? When you add a folder to a backup program, I would add two folders or just the folder Documents Mobile?

  The second folder (the one your screenshot) is a backup of an iPhone, iPad, or iPod Touch, which was made via iTunes. More information: finding and managing your backups iTunes - Apple Support

• Why are there no tutorials for Webmatrix?

  Why are there no tutorials for Webmatrix?

  Go to this page: -.

  http://www.Microsoft.com/Web/WebMatrix/

  -Then go to the midlle of the hyperlink above (towards the bottom of the page) and in the middle (again) where there is: -.

  Tutorials:

  -section.

  If my comments have helped please vote as helpful.

  Thank you.