HTML5: Define a new list function

Similar Questions

• cannot move more than 10 contacts to a new list

  Before Thunderbird (v 38.3.0), I was able to set-up new groups using the "new list" function. I create a list and then open my personal address book as well as the names of drag in my personal address book in the new list, I just did. I tried earlier and after that I added just 10 names to the new list it won't take all the names more. I can drag on the new list, but when I opened the new contacts list only 10 are there. I'll close Thunderbird, restart my computer, restart Thunderbird and see what happens. If you don't hear from me in 5 minutes, which does not resolve it.

  The problem was the 10th name I dragged on the new list did not have an email address... just a name. When I removed this contact, the new list accepted all other contacts perfectly! A msg of error little would save time and aggravation when this situation arises!

  Thanks Matt for the effort.

• vCO WebView error - parameter value is not defined in the list of the Webview attribute

  Hello

  I tried to create a simple web view for Orchestrator (5.5.1 1617127), who will present a link to launch a single workflow. I followed the instructions in the Guide of VMware and the VCO Team Blog, but both find themselves with similar errors, which seem to have a common root: it seems that the display of web pages can not read the attributes.

  On the web page, I'll see something similar to the following:

  WebView - an exception has occurred.

  Reason: WorkflowLink component error: value of the parameter "attribute" (alias "workflow") ("createVM") is not defined in the list of the Webview attribute

  You may continue by restarting the session.

  In the server.log, I see the following: -.

  11:46:04.717 2014-10-02 + 0100 [http-bio-xxx.xxx.xxx.xxx-8281-exec-2] {} [WebviewExceptionPage] Exception Webview INFO - message:

  org.apache.hivemind.ApplicationRuntimeException: component error WorkflowLink: "attribute" parameter value (alias "workflow") ("createVM") is not defined in the list of the Webview attribute

  The createVM attribute is set in the correct web view as an attribute with a Type of Workflow and value to create simple virtual machine. I get a similar error any attribute type I try to get out of the workflow (the example of getVirtualMachineList does not create an error on the page, but is not fill the window and creates a similar message appears in the log).

  Can someone give me directions on what to watch next? I can't find anyone else with this error, which makes me think it might be something specific to this medium, but I can't work on what it could be.

  Thanks in advance,

  Ben

  I had the time this by restarting the service after each new attribute has been added, which was far from perfect, but looking around the forums, I have seen that WebViews were being obsolete, so I'll have to look at alternatives in any case.

• Is it possible to define a new enumeration format?

  Hello

  I would like to know if there is a chance to define a new enumeration format. I hope that this "list format" is the proper translation for "Nummerierungsformat" of the German language.

  What I do have is an enumeration that contains the days of week, as: Mo, you, we, Th, fr, sat, Sun

  And after to have known"the enumeration continues with the start (Mo,...).

  Then there is a chance to do list? Or maybe another option?

  I have InDesign CS5.

  As we say in Germany: "Super!"

• How can I transfer my address book from Thunderbird to another running Thunderbird computer and combine the old and the new list into one?

  I have a computer in my summer residence and one to my winter home. They both run Thunderbird for my emails. When I move one residence for others, I want to update my address book Thunderbird. I do it by selecting - address book - tools - export, on the ' old computer ', store them on a memory stick, and paste _ address book - tools - import, the new address to load the list from memory. It works, except that the address of old and new lists are separate lists. I would like to combine them, but without the duplication of the same addresses. Is this possible? How can I do this?

  http://KB.mozillazine.org/Moving_address_books_between_profiles
  http://forums.mozillazine.org/viewtopic.php?f=28 & t = 1588535

• Cannot copy the addresses in new list since the update of 31.5

  I'm trying to set up a new list successfully) and fill it with addresses by copying and dragging the addresses in my personal address book. I have done this dozens of times in the past. Now, from 31.5, it seems that the addresses have been copied, but when I opened the new list, it is empty. I have not implemented a new list for the last few months so don't know when this happened. Went through all the settings but can find no one who would control it.

  Help please!

  6rtury

  A new facility would create a new profile, but already, it has a profile in the right position and will, as it does on the updates, use the existing profile. Watch profile.ini %appdata%\roaming\thunderbird

  (If not, everything inside the new profile to delete and copy everything from the inside of the old profile here.)

• How to copy an email to my address book in a new list that I create?

  I have created a new list for email and you want to be able to select e-mail addresses from my address book existing. I don't seem to be able to do this very basic thing. Y at - it something I don't know?

  If you usually make your new list and then display it in the left column, then you can drag (copy) any address in this list.

• Open link in a new tab function when Middle-click there just disappeared.

  Hello! Open link in a new tab function when Middle-click there just disappeared; now, when I Middle - click on the link, nothing happens - no new tab, just nothing! It comes not with a mouse, I tried another mouse and it's average click and even in other browsers works; Right click and 'Open link in a new tab' (as well as other options menu) to work correctly. No idea what happened? Thank you!

  You can have an add-on which interferes with middle-click behavior. To test this try the procedure described in article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

• My laptop stopped recognizing wireless function. What drop-down list function should I use to get it to recognize wireless again?

  My laptop stopped recognizing wireless function.  What drop-down list function should I use to get it to recognize wireless again?

  Hello

  What is the brand and model of your laptop?

  Follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  Enable or disable a network adapter

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-a-network-adapter

  Method 2

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• can't see new lists of reading, cannot delete 'old', no error msg

  Using Win Media Player 12.0 under Windows 7. After you have been using media player several years, never had a problem like this before. Both these problems have taken place in more than a month:

  (1) I can't create new playlists, or at least not that I can see. I am going through the steps of creating a new list, give it a name, to get the No. error MESSAGES, but then I can't see or use the new playlist. I know that it is there because at least some of the time, when I try to create a new playlist with the same name, it says, "the xxxxx playlist already exists. You want to overwrite it? »

  (2) in addition, can't remove most of my playlists, at least not those with numbers for the name of the playlist. (When I create podcast playlists, the names on the list are all numbers, which denotes the date.) I go through the steps to remove these playlists, once again, NO error MESSAGE, but the playlist is still there. I had a few old playlists starting with the letter 'Z '. Those I can delete.

  I just tried using Windows Media Player troubleshooting: "we have not identified any problems and that's why no fixes have been applied." So much for that.

  It's such a shame that this is not a stand-alone application, I could just uninstall and reinstall. Sigh.

  Suggestions? Maybe I should just look for something new, itunes maybe?

  Solve the problems of Windows Media Player video and other media or library.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Solve problems in Windows Media Player.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

• How to set up a mailing list function bar

  I am wanting to know what is the best way to add a mailing list function to an ipad magazine I've created. It is configured as an email button? I'm not sure how to do it 100%. I have attached a picture of what I'm talking about.

  Thank you

  

  I would create a html form which submits to my web server where I process information and store the value of form in a database.

• FRM-30351: no list items defined for the list item

  Hello
  I used a dynamic list, and when I compile this message appears:
  FRM-30351: no list items defined for the list item.

  If the list is not needed, it's just a warning and you can ignore it.

• Can you do a vector shape to a path without having to define a new custom form?

  I want to do a vector shape to a path. Is there a way to circumvent the duty to define a new custom form? I just want to add quickly the vector shape in a new layer, but I don't need defined as it is going to be used just once.

  Of course, if you select the path to make it active, just do a color fill adjustment layer.

  There are other ways if this isn't what you want.

  In photoshop cs6/cc with the active path and one of the tools of form or of the selected pen tool, press the button of form

  in the options toolbar.

• 11g - deletion and update new list of parameter queries

  Hi all
  
  We intend to update the 10.2.0.4 E Business suite 11.2.0.1 (11.5.10.2.) database.
  We have little withdrawal and new list of parameters in database 11g based on the notes 216205.1
  
  We have compatible mode as 10.2.0 before and after the upgrade until the system is stable. So, until we change the compatible to 11.2.0, do we need to have the settings in the list of deletion or we can remove that although we have the compatible as 10.2.0 during the upgrade.
  
  There are also two new settings optimizerautostats_job = false and sec_case_sensitive_logon = FALSE.
  
  Please let us know if we can have these new changes of parameter find when we have the compatible 10.2.0 to 11 g database.
  
  Thank you and best regards,
  Rakesh

  Rakesh,

  Please let us know if we can have these new changes of parameter find when we have the compatible 10.2.0 to 11 g database.

  You can have these settings, and you can remove it later once you are finished with the upgrade.

  Note: 881505.1 - version of Oracle Applications 11i with Oracle 11 g Release 2

  Adjust the settings of initialization for the new version file
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e10819/afterup.htm#CEGHAAFH

  Thank you
  Hussein

• Define the new service of tangosol-coherence - override.xml

  Hi all
  I am new to consistency. Have a problem to define the new service.
  
  I am trying to create a new service replied to a few caches and intend to run this service only on some nodes in the cluster.
  
  So I created the new definition of service in tangosol-coherence - override.xml by copying the definition for ReplicatedCache (id = "1"). I changed the ID number to + 101 + and changed the service type for "newReplicatedCache."
  Then in my cache - config.Xml. I put the tag < service name > "myService" to "newReplicatedCache".
  
  It starts and runs ok, and Jconsole MBean I see there is a "newReplicatedCache" with "myService" running, which is great.
  
  Now, the problem comes, tangosol-coherence - override.xml, <>lease-granularity for "ReplicatedCache" is set to Member.
  And I need put < lease-granularity > to 'newReplicatedCache' to wire.
  
  I did and seems consistency is without taking account of this parameter and always using members to 'newReplicatedCache '.
  
  Then I removed the definition for 'newReplicatedCache' in tangosol-coherence - override.xml, and consistency is always be able to run, and there always create a new service "newReplicatedCache". I guess this is just to get the name of cache-config. XML and then use "ReplicatedCache" default service definition in column a new service.
  
  So my question is how to define new services?
  
  I checked the documentation for the serial number, it does not explain how to create a new service. I understand that this is a very simple matter of installation, will be more than happy to read the documentation if you can direct me to that useful :)

  Hello

  To achieve what you want, delete ... your file tangosol-coherence - override.xml and change your schema definition reproduced in you cache configuration to:

  
    myNewCache-scheme
    myNewReplicatedCache
  
     thread
  
    
      
      
    
  
  

  Andy