Hundreds of old podcasts with dead links will not ERASE. Help, please...

Similar Questions

• Why can't install a program called kies, I downloaded this direct from samsung, but no matter what I do it will not install help please

  I tried to install this software on my laptop for a week without success, he keeps citing error

  none 0 x 80040702 could not load the dll dll:mmssetup, I sent an e-mail to samsung and got a response of the following, I followed all the instructions but it still does not work What escapes me. Vista i run there all updates etc etc.
  Is software called Kies, the application to organize the

  contents between Samsung mobile and PC. Kies offers
  easy access to your device, via the easy backup data management and
  Sync and powerful multimedia features.
  However, please check the system requirements before downloading, to
  ensure that it goes well. Below each element of the system configuration required
  is a link for an update, if necessary:
  Operating system: Windows XP, Vista or 7 (32 bit / 64 bit).
  Processor Intel® Pentium 1.8 GHz processor or higher (recommended)
  Minimum memory (RAM) size 1.00 GB (recommended)
  At least 500 MB of available disk space
  1024 X 768 resolution screen (600), 32-bit or higher
  NET Framework 3.5 SP1
  If it is not present can be downloaded from:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ab99342f-5d1a-4
  1
  3D-8319-81da479ab0d7<(>&<)>displaylang = en
  Windows Media Player 11
  If this isn't the case, current or old version is available for download on:
  http://www.Microsoft.com/windows/windowsmedia/player/11/default.aspx
  4.5 Mobile device ActiveSync (XP) or Microsoft Windows Center 6.1 or
  superior (Vista / Windows 7)
  For XP:
  http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Active
  syncdownloaddownload.mspx
  For Vista / Windows 7:
  http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/devicec
  Register - download.mspx
  DirectX 9 .0c
  Can be updated from:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2da43d38-DB71-4
  C1B-bc6a-9b6652cd92a3<(>&<)>displaylang = en
  If you need additional assistance, please contact Samsung again and
  We will be more than happy to help.

  I have

  Hello

  "If you need additional assistance, please contact Samsung again and.
  We will be more than happy to help.

  Samsung suggests that contact them again you if you need help with this.

• NB 100, can't enable AHCI mode. Official driver will not install. help please!

  Hello

  Is someone can you please tell me how can I activate the AHCI mode after you have reinstalled Windows XP Pro on the NB 100? I try to install the official "Storage Manager drivers" but windows tells me that the machine does not meet the requirements.

  Help, please

  Yes, you can install the AHCI drivers * after * installation of XP in Compatibility Mode.

  Directions for use:
  http://support.Microsoft.com/KB/314082/en-us

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• Dynamic links will not open

  I used Adobe Dynamic Link in Premiere Pro in the past; both on my home computer that uses CS 5.5 and on my work computer that uses the creative cloud.

  However, just today, I tried to open dynamic link by clicking on file > Adobe Dynamic Link > import After Effects Composition.  Rather than open the dynamic links, first freezes everything simply.  An error tone plays whenever I try to click on anything whatsoever, and all the other components on my first interface are grayed.  I pressed ESC when it happened, and who seemed to come first back to normal, before I had tried to open dynamic links.  I tried to get around this obstacle by importing an After Effects project, but which causes essentially the same problem.  I have the small window that says "import...". "with the loading bar, but the bar does not load.  Pressing ESC cancels the import action and return back to normal first, before I had tried to import the composition.

  I don't know why the dynamic links will not open.  I have not received an error message, and the first collapsed in the process.  I need to know what the problem is and whether or not there is a fix.

  Yes, he does.  Thank you.

  So actually, Dynamic Link is thus broken in AE.

  I think it's time to clean your media, but also trash your preferences cache database.  Then create brand new project in each one as a test.  If all goes well, who's going to make things again.

  Question: dynamic link is broken in both versions of the Premier Pro?

  See you soon,.

  The f

• I have 6 phone is dead.  Will not turn back on

  I have 6 phone is dead.  Will not turn back on

  See Troubleshooting in the paper support. If your iPhone, iPad or iPod touch won't turn on - Apple Support

• How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  Click here and ask the staff of the iTunes Store to zero the balance of your account.

  
  (142584)

• Email with attached video will not leave the Outbox... Cannot delete Email with the attached video.

  Email with attached video will not leave the Outbox... Cannot delete Email with the attached video.

  Check to work offline , and then it should delete.

• App is not properly download now will not erase!

  I downloaded an app, but it does not download properly. I tried to remove it, but it will not erase my ipad screen.

  When I try to use the app it says waiting but never of the charges. so annoying how do I get rid of him.

  Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Firefox will not erase my story or my username or my password

  Ive tried 7 times now and no matter what firefox will not erase my story or my username or my password I went to history, then erase recent history and I clicked on all delete as deletion, but is not delete everything I still have my story my username and my password why used what ive deleted even stop my computer and he brought to the top, but it works not yet. Whats rong with firefox is not working properly? I can't find anything in the fourth aid have searched and searched and searched, but he doesn't tell me anything

  • Click on the (empty) input field on the web page to open the drop-down list
  • Select an entry in the drop-down list
  • Press the DELETE key (on a Mac: shift + delete) to remove it.
  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • http://KB.mozillazine.org/Deleting_autocomplete_entries

• the user will not erase & isn't in Control Panel users

  If I go to C:\Documents and Settings, there is a user that I never had and want to get rid of. But this user has never been and is not present in Control Panel > users. If I try to remove it from C:\Documents and Settings, it starts with a box to confirm deleting file saying 'the file 'xxxxx' contains items whose name is too long for the trash. Do you want to permanently delete it? "I click Yes or Yes to all.

  Then he quickly paged home with a box titled error deleting file or folder that says "cannot delete the XXXXXXXXXXXXXXX: cannot find the specified file." Be sure to only specify the path and the correct name. I click on one button, OK, and I'm done. It will not erase. So I renamed this user ' broken but will not erase "other users on this list are administrator, Administrator.JEFF - A40763A256, all users, all Users.WINDOWS, by default, the User.Window default user, guest, Jeff.JEFF - A40763A256 (me). Not sure why mine has this weird kind of thing next to my name (?). In any case, I guess this isn't a problem.

  If I look in Control Panel > user accounts, I see that Jeff (Administrator) and comments - the guest account is disabled. These are the only two users ever.

  You can manage your startup to find out why your computer is experiencing difficulties of start and stop. Certainly I would test the hard drive.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility -http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup -http://www.microsoft.com/technet/sysinternals/default.mspx

  Clean boot in Windows XP -http://support.microsoft.com/kb/310353
  Boot minimum troubleshooting Windows XP - Advancedhttp://support.microsoft.com/kb/316434

  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  MS - MVP - Elephant Boy computers - don't panic!

• Hung up on the bad test page port (LPT1) and tail blocks to HP C4200 w/USB connect... will not erase

  Hanging test page to the wrong port (LPT1) and tail blocks to HP C4200 w/USB connect... don't delete.__How cancel?  Pls help.  TKS Ron Moore
  

  Ideas page: hanging in wrongly Test prt (LPT1) and tail blocks to HP C4280 w/USB connect... will not erase.

  How to cancel?  Pls help.   TKS, Ron Moore

  Hi Ron,

  1. how many printers is connected to the computer?

  2. did you of recent changes on the computer?

  3. what happens when you try to change printer (LPT1) port

  Method 1

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2

  If the previous step fails, then I suggest that you restart the computer the print spooler service and check if it works.

  A print spooler is a system service that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right click on the print spooler service, and then click Properties.

  (d) under the tab general , next to Startup type, make sure thatAutomatic is selected.

  (e) if the service is not already running, under Service status, click pie Sand then clickOK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  I have a printer HP psc 2510 series deskjet.  Print many documents, it has notified me that I was low on ink which I was aware of.  I had a little more what to print, and chose the young project option for printing of no more than 1 to 3 pages.  I constantly tried to cancel the job that kept the origin of the printer show (not answer).  It aligned to the top other jobs, but after trying to delete all, printer then turn on again, it still shows the original print job, and I'm unable to find a way out of Quebec

  Verification of updates, there are only two listed as "optional" still thought by downloading them, it can solve the problem.  It does not; He gave the error message on the print job in that causing a feeling of power.

  I've never seen this before; I was always able to plug & play on my desktop printer and trying to use it on my Sony VAIO VGN-NW310F series.

  It is imperative to get this resolved.  School assignments are due and professorts not only does not want to hear the excuses of any kind, printing problems have always been easily resolved so far.

  Please - I need immediate assistance.  I already used the troubleshooter printer online which, as said earlier custody indicating the print job to Québec, is causing the printer to not answer.  I cancelled each time, but it will not go away.  I turned off the printer, reinstalled in the hope it would be empty, but it will not.

  I appreciate your atttention guest on this subject.  I work with Windows 7 Home Premium 64 bit operating system.

  Thank you for your help.

  Robyn Drake

  E-mail address is removed from the privacy *.

  Try in Services, locate the printer spooler, select it, and then stop the service.

  Then check if you can delete the print job, if so restart the service

• Maps and layouts: update of the failure or will not erase

  Select Page layouts et Cards fail to update correctly. This is the case for the unreleased updates to with no associated collection and the unreleased cards with associated No. layouts. In addition, in some cases published layouts or maps indicate the status ""update failed, obsolete, "but the changes make their way to the app." This happens for some layouts and cards, but not all; In addition, some layouts and cards work fine for awhile and then fail to publish or will not erase. Is this a known issue? [using publish.adobe.com app 2015.2.100 version]

  Hey Kristen - Sounds complicated, and I don't know all the details completely, but I have had similar experiences and started to notice the following, especially with the cards and layouts.

  Scenario:

  I have a card and use it in a mapping rule for a layout. Everything is cool, work the way you want.

  Now, I want to remove the card (I am resetting things for a demo session and want to start without cards nor the updates page with the exception of the default values.)

  If I delete the card first, I get the message "Failed to update, obsolete".

  To avoid this or delete it, I need to remove all mapping rules in all page layouts that call the map and publish all these layouts (without the map reference.)

  So I new and remove the card.

  I followed a similar procedure for the removal of the page layouts-

  The value of all the collections so that none use the layout to remove

  Publish all the collections that are obsolete.

  Then you can new and remove the unwanted provision.

  It's probably pretty fussy, but it works.

  I've had similar experiences with items and collections. If an article or a collection is used in several collections, I would get a similar error. I had to work on what article or the collection has been used in several places before I could new and delete.

  Hope that helps

• Gum will not erase completely, 100% opacity

  I have PSE9. I am cropping of the images (.) Start TIF) with the tool Eraser and one day it will not erase 100% not more. I set the opacity to 100% and have tried using a few different size brushes, but it's still (it's like the opacity can't exceed 80% although his game to 100%) but when I switch to Notepad and pencil it works (total deletion). I also tried to perform a restart of the computer, trying to change other images and even tried an image that I finished before the Agency not avial a re-Edition.

  Help, please.

  Click on the small arrow on the options, top-left bar and reset the tool tool. If that doesn't solve it, suggest that you reset the preferences. Let us know how make you out.