Hyp 11.1.2.4 - workspace [Port number]

Similar Questions

• vmWare Horizon Workspace - change port number

  Hi guys,.

  I installed the workspace vmware horizon as a proof of concept, everything works fine. I'm now doing the public gateway. The problem which is the port number (443) that uses the bridge can be put on the public because he is facing some of our other things. I wonder since everything is installed and working properly, what would be the proper way to change the GATEWAY port number?

  Thank you

  Unfortunately, in 1.0, we do not allow change the port number.

  Will you be able to move to 1.5? Then, allow us to change the COMPLETE domain name and port.

• Workspace URL without port number?

  Hello

  Y at - there a way to config the URL for the workspace do not use the port number for LCES Webpshere 6.1 environment (e.g."" http://localhost: / workspace/ "instead of"http://localhost:9080 / workspace /"'") due to the configuration of the firewall?

  Thank you

  DAO Han

  (1) change the port WC_defaulthost of the appserver 9080 to 80 instance

  (2) make sure that '80' is listed as a 'host alias' for the virtual host 'default_host' or another virtual server that you created exclusively for LiveCycle

  (3) restart the appserver instance

  (4) check the SystemOut.log and verify that all web modules LiveCycle now bind to port 80, among others (such as 5060, 5061 etc.).

  (5) try http://localhost/workspace and it should work.

• Phone wants to know a port number. What is c? Their example. 0101

  I am going through the pain of installing my email on my phone. I was able to fill in all, but what is called a port number. The phone gives an example of 0101

  Hello

  It's not something that I think is related to Firefox for Android, but I'll do my best to help.

  The e-mail on your application software a Port number to help it connect to your mail service. Each mail service provider has different settings, so I recommend you contact or have a look in their help files for orientation. This will usually lies in the sections to make the connection by using the third-party e-mail software.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• Name of the resource does not COM port number

  Hello

  When I connect computer Board, I use

  ResourceManager.GetLocalManager (). FindResources("?*")

  to get resource name ("ASRL11::INSTR") and use that name that I invoke

  A session = ResourceManager.GetLocalManager (). Open (Name);

  to get the session and get the value of the property HardwareInterfaceName of the session.

  The problem is that the COM port number in the property ("Com10") of HardwareInterfaceName does not match name the resource. The COM port number is correct, that it is the same, as noted in the Windows Device Manager. But why the name of the resource 'ASRL11::INSTR', it should be "ASRL10::INSTR".

  Does anyone have an idea?

  Thank you

  Eva

  Hello

  Port 10 is reserved for the parallel port

  Curt

• Get TCP Service Port number name

  The TCP listen and the TCP create listener screws have an entry named 'Service name' base, once a listener is created in the LabVIEW application is it possible what service named is running on which port in an external application and query? The external application may or may not be developed in LabVIEW.

  TCP exits create listener VI the port number used, this is useful information, but I don't see any automatic method for an external application to get this information?

  C++ getservbyname function does not return the information given to the listener of LabVIEW TCP known, created and listen.

  The help of LabVIEW:

  name of the service creates a reference known for the port number. If you specify a service name, LabVIEW saves the service name and the port number with the of Service Locator OR.

   

   

  OR Service Locator:

  http://digital.NI.com/public.nsf/allkb/227453F884CE035386256E55007A303D

• WMI Telnet Port number

  I'm not able to port WMI telnet to a particular server. At the same time, I was able to telnet to the port even other machines that I have connected.
  Please help me solve this problem.
  Thanks in advance
  Aldo

  Aldo, could you please verify if WMI port is listening to this server.

  Port number: 135

  Concerning

  Nithin

• Need to change the com port number, but users do not have administrator rights

  Our users don't have administrator rights, however, there are a few pieces of software that communicates with the hardware using COM ports.  Since they don't have administrator rights, you may not click on advanced in the communications port to set the port to the necessary com com.

  I found reg hacks online that say will open the advanced screen to allow the com to be changed, but none that I've found work successfully.

  Can someone tell me the correct registry setting that I need to grant permission to in order to open the advanced under properties tro communications button and have the available com port number to change.

  Thanks in advance.

  Hello

  You have the computer connected to a network or domain?

  It is not possible to access advanced screen or advanced without administrator rights. I suggest you to contact the administrator of the system to help about it.

• Alternative Outlook 2007 smtp port number.

  • Alternative Outlook 2007 smtp port number.

    Sending ' reported an error (0x800CCC80): "None of the methods of authentication supported by the client are supported by your server."

  • Outlook 2003 does not have this problem with the same mail server using the same exact account.
  • Windows Vista Ultimate SP1 with Outlook 2007 SP2 doesn't have this problem.
  • Windows XP SP3 and Outlook 2007 SP2 illustrates this problem.
  • Windows 7 with Outlook 2007 SP2 has this problem.

  We needed to move to another port for smtp 3535 25 for security reasons.  This is a wide spread question.  We are connecting to a POP3 "qmail" server to send and receive e-mails.  All systems work perfectly with the receipt of emails. Need a solution to this problem as soon as POSSIBLE please...

  Hi Swmyers,

  Here is a link to the Google Help article about connect Outlook 2007 to Gmail:
  http://mail.Google.com/support/bin/answer.py?hl=en&answer=77689
  Measures 8-11 show you exactly how to set up the SMTP port and the ports that they recommend that you use.
  Please let me know if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change the Port number of e-mail outgoing "587" as required to use the Comcast e-mail

  When my email out through Comcast did not all Comcast more, technical support told me that I had to change the number of Port for outgoing in Windows Live Mail beta 110 to 587.

  Worked well, until I had a system crash.

  When I reinstalled Windows Live Mail, I could fine is no longer the 'Tools' button in the status bar and by result cannot change the port number.  So, I can't send emails from Comcast of Windows Live Mail.

  The inbound port setting is apparently correct already, as I had no reception bad don't mail... sending mail.

  I hope it will work for you.  I use Windows Live Mail 2009.

  If you look on the left side of the window, you will see the name of your e-mail account.  (Underneath there is Inbox, drafts, sent items, etc.)
  You'll want to right-click on the name of the mail account. (Right above where it says Inbox.)
  Then you'll want to click on properties.
  A properties box opens.  You'll want to click on the tab "Advanced" on the right side of the Properties window.
  The first area is the SMTP (outgoing) port number.  You just want to change it in 587.

• What is my e-mail server name and port number

  Unable to send a scanned document because I don't know my server name and port number

  Your e-mail account provider has that information.
  They should have a help page on their Web site.
  If you tell us who provides your email account, maybe someone can help
  you.
   
   
   
  --
  Dave N.
  MS - MVP (Mail)
  Windows 7 Ultimate
  http://download.live.com/wlmail
   
   
   
  "badrisk" wrote in message news: eec85ab4-ac81-44d 9-a285-8aec5cdf9cb7...
  > cannot send a scanned document because I don't know my server name and port
  > number
  >
  >
  >
   

  Windows 7 Ultimate 64

• By the way a specific port number

  Hell-o,

  My question is about the PIX515e. We have a Server Windows ISA firewall we want to retire. I need to move the ports that have been opened in this area of ISA for the PIX. On AIS, he simply says "send and receive port tcp 5510' for example. Is it possible on the PIX of this port is very simply to apply. Without having to create a static entry? A way to simply open a specific port number?

  Suggestions, ideas or advice greatly welcome,

  TIA,

  Gary

  Which starts the connection, the interface of high security to low or low security interface to high? If she is brought down, do nothing, it will allow by default. If it is low to high, you must 1) of static type and 2) an access list. The acl is not reference IPs, but it should (security reasons - the whole point of the PIX). For example:

  (1) static (inside, outside) subnet to the 10.10.10.10 x.x.x.x 255.255.255.255 mask (or use a range of IP addresses)

  or

  static (inside, outside) 10.10.10.10 10.10.10.10 (if nat disabled)

  and

  (2) access list 102 permit tcp any any eq 5510

  or

  access list 102 permit tcp any host x.x.x.x eq 5510 (better)

  or

  access-list 102 permit tcp host y.y.y.y host x.x.x.x eq 5510 (best)

  Access-group 102 in external interface

  It will be useful.

  Steve

• How can I open a port number

  Hi there I am in the middle of the implementation of an Internet Radio Station, using an external server, I have their port number, which I assume I need to open on my OS so that data can be streamed. How can I go about it.

  Thanks for all answers

  Mike

  Read this post:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-to-open-ports-with-Windows-7/235b30b1-9be2-4e55-94fc-201aff8f0809

• Change the port number of the IOM servers

  How do I change port number of servers IOM to 14000 to some other port after installation/configuration and use of the server for more than a year.

  Connect to the weblogic console and stop the server instance managed IOM. Select the IOM server instance and change the port. Start it up again, then EM to change all internal references to the new port. Also change any other application integrated to reflect the change of port.

• How to change the name of the ODI agent and port number

  I installed ODI standalone agent (11g) on a linux server.  We now realize that we need to change the name and port number of the agent.  Is it possible to change these or do we need to re - install odi agent?

  I know that I can change the name in the ODI, but I can't change the port number.  I would like everything to be consistent in all of our environments.  That's why we need to change the name of the agent and the port number.

  How do you start the agent? Which command you use to start?

  There are two ways, either by directly calling agent.bat and passing name agent and port don't start or you can run the sh/bat file created during installation (present in oracledi\agent\bin). The file name that is created should look like this (agent_localagent11g) where localagent11g is the name given during installation time and 'agent' is the prefix that was added by ODI.

  There is no configuration file to configure the port number and agent. Make sure that the port number and name you pass to agent.sh must match what is configured in odistudio.

  Agent.bat '-PORT = 20910 ""-NAME = localagent11g.