I am a little confused with the help of CSS for control links.

Similar Questions

• With the help of FSP_AFTER_LOGIN_URL for deep links

  Hello
  
  I use the Application Express 4.1.0.00.32 on Oracle 11.2.0.1 RAC.
  
  I want to direct a user to a specific page by using the following URL from a link in an e-mail...
  
  http://myhost:8080/apex/f? p = 111:41:2115755123353567:RP:P41_LDIF_CSV_HEADER_ID:285
  
  I tried to use FSP_AFTER_LOGIN_URL in the URL based on the information found in the forums etc...
  
  http://myhost:8080/apex/f? p = 111:41:FSP_AFTER_LOGIN_URL: / f? p = 111 | 41. PR | P41_LDIF_CSV_HEADER_ID | 285
  
  but I'm obviously missing something because it just doesn't work, the user is redirected to the page of connection, as planned, but after logon is presented on the home page.
  
  There is no reference to FSP_AFTER_LOGIN_URL in the documentation of the Apex.
  
  If anyone can point me in the right direction, I'd be very happy.
  
  Thank you
  Dave

  Once you log in to your app look at the value of session to FSP_AFTER_LOGIN_URL, can be less or more colons in your URL

  Look at this Re: deliver OWA_UTIL. REDIRECT_URL with APEX 4.1.1

  Thank you

• With the help of Vlan for LAN and DMZ

  Hello

  For the moment, I have assigned my LAN and DMZ networks to two separate network card (so therefore no Vlan tagging)

  for example vmnic0 = LAN, vmnic1 = DMZ.

  It works well but I like to make changes in the way I want to use two separate physical network adapter and use on the two s two LAN and DMZ nic but now using the VLAN.

  So think of this configuration:

  For each network, I create a Vswitch, in order to obtain a Vswitch named VsLAN, VsDMZ for the case.

  The Vswitch I attribute a two nic Nic will be the day before. as vmnic0, vmnic2 (at rest)

  This Vswitch I create a port group and assign the correct number of VLan as LAN 10 and 20 to the DMZ.

  Create the another Vswitch will have the same Nic but now vmnic0 will be the stanby one.

  Probalby all great so far I think or not?

  Issues related to the:

  -Well this concept where there is a relationship a Vswitch and port group or a switch with multiple exchanges?

  In case a Vswitch with multiple port groups I will assign to group level reserve and the active NIC Port.

  -If I create a group of ports and assiging several Vlan IP packets received by the virtual machine itself also be labelled or not identified?

  Other words. Do I need to configure the NETWORK adapter to the virtual machine also for the same local network ID virtual or not.

  Thanks for your comments.

  Hello

  Change of vlan is a pretty good idea to get the failover and the performance of the network LAN and DMZ. You have confused somewhat however concepts.

  A can only be used in a vSwitch vmnic. So what you want to do is the following:

  Create a vSwitch

  On the vSwitch create two ports: LAN (vlan10), DMZ (vlan20)

  If vmnic0 and vmnic1 have access to the vlan10 and 20, then simply add the two vmnic virtual switch. By default, they will both be active and that's fine. If you do not want to CHANGE the GRPE ports LAN and goto the "failover" tab and put vmnic0 as active and vmnic1 as before. Then do the reverse on the DMZ port group.

  Best regards

  Frank Brix Pedersen

  blog: http://www.vfrank.org

• With the help of AfterInsertTrigger for the audit table

  Hi all
  
  I use after Insert trigger to re - write the record goes to the base table in the corresponding table. The statement from the two tables are the same, except that the table has a column more - audit_time. Here is how I defined the trigger:
  
  Create or replace trigger dup_rec after insert on table_A for each line
  begin PK_comm.create_audit_rec (table_A, table_b,: new.) ROWID); end;
  
  
  In the PK_comm package, I defined the procedure as 'PRAGMA AUTONOMOUS_TRANSACTION' create_audit_rec as follows:
  
  
  Procedure create_audit_rec (baseTable IN VARCHAR2, auditTable IN VARCHAR2, cRowId IN VARCHAR2)
  IS
  PRAGME AUTONOMOUS_TRANSACTION;
  
  Insert into auditTable (audit_time, col1, col2, col3)
  Select systimestamp, col1, col2, col3
  from baseTable
  where ROWID = chartorowid ('v_rowID');
  
  It seems that registration is NOT added to the audit table when I tried to insert a record in the database table. Is it possible that integration into baseTable have not completed when the trigger is activated? If Yes, what is the work around?
  
  Thanks for your help,
  
  Mike

  Packages have session scope. Thus, each session will have a different instance of the collection.

  If you have multiple tables, you must in general, several collections. If you can guarantee that a single table would never change during the scope of a single statement, you could get away with a single collection. But as soon as a trigger on table A changes data in table B, you would need different collections. For most applications, it is much easier to simply create separate collections. I guess you can also create a collection of objects and folders that have a table name and a ROWID as well and add the logic to process only the associated with the table ROWID that you are interested in.

  Justin

• With the help of DAC for running no BIApps infa jobs n 2 EP running in parallel

  Hello
  
  We already have configuration BI Apps prod environment using DAC, Informatica and OBIEE 11 g for one of our customers.
  
  Now, we want to check the possibility of using the DAC for the execution of BIApps no informatica related jobs.
  (That we had only a week of the execution plan of DAC weekend and Informatica and DAC are inactive most of the time during the week)
  
  Customer wants a separate new small datamart be configured which meet the requirements of statement for different departments and has no links of kinship or any link with existing BI Data Warehouse applications.
  
  I just wanted to check if it will violate the license terms (if we use CAD to workflows not BI Apps and run another EP)?
  
  In addition, the DAC Build 10.1.3.4.1 is capable of running two parallel execution plans?
  
  We have heard long back that two parallel feature EP will be lunched in the version 11g CAD. Pointers or new in this space?
  
  Thanks in advance,

  From what I remember, you cannot load a 'distinct' DB instance that is NO OLIVIER. If you create a small custom datamart on the INSIDE of the OLIVIER exitsing schema, then it is acceptable. However, if you use DAC (no matter if its plan one or two plans) to load a NON-OBIA target, this may violate the license agreement. You need a self-contained separate license for Informatica and use the planner of Informatica tool. If you want to use DAC, ensure that your target is inside the DW OBIA.

  Pls correct brand...

• With the help of Max for alphanumeric values

  Currently I have a column varchar2 with the following data
  

  NPT_Code
  NPT00001
  NPT00112
  NPT03019A
  NPT00419

  Try to find a way to remove all the letters and get the next highest value increase.
  
  Numbers are always set to 5. Letters from there always 3 to the left. and sometimes, there is a letter to the right.
  
  I was going to mak a sequence and manually to the search for the greatest number in this column and just start from there, but I was wondering if anyone else knows another solution that uses max or something simliar.
  

  Select Max(NPT_Code) + 1 into l_NPT_CODE FROM TABLE
  
  UPDATE TABLE
  SET NPT_CODE = L_NPT_CODE
  WHERE ID = XXXX;

  Hello

  Here's one way:

  SELECT     TO_NUMBER ( REGEXP_SUBSTR ( string_column
                            , '[[:digit:]]+'
                        )
              )     AS number_value
  FROM    table_x
  ;
  

  number_value will be the number 3019 if string column is one of the following strings:
  NPT03019A
  NPT03019
  T03019
  03019NPT
  NPT3019A
  NPT0000003019A
  03019
  3019

  You can then use number_value functions such a MAX.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.
  See the FAQ forum {message identifier: = 9360002}

• With the help of DVT for the anonymous user

  Hello
  
  Can we use DVT for customization of the user interface for the anonymous user, I need to use the PST with the user offline. Please let me know if there is a way to do
  
  Kind regards
  Sylvie

  Hi Sarah,.

  Not really, no. If the user is anonymous, the portal framework has no way to keep the changes he made in the database, because they cannot be associated with a single user.

  If you really want, you could automatically connect to a pre-defined user (aka. a user with the name "anonymous"). However, since everyone could be connected to the same user, changes made by anyone would be seen by everyone and users might be undo/redo each and other changes constantly.

  George

• With the help of ASA for our VPN

  I was curious, if through the ASDM, there is a way to show that was recorded in the last week and for how long?  I know through the CLI I can use the sh sessiondb-vpn l2l to see who is connected, but trying to get a report of its total use by user, date and time?

  Hi Dan,.

  The ASA does not all historical data connections so it won't be possible.

  You can view the users connected to the part followed by ASDM but you do not have the reporting features.

  Kind regards

  Nicolas

• With the help of Outlook for Windows on my Macbook Pro 13 "(the end of 2013)

  Help! Please, I beg you!

  I'm being forced to adopt Outlook for Windows to interface with a NetSuite product that transfers information back and forth between Outlook and NetSuite. A work requirement. And NetSuite has yet to acknowledge that everyone works in a Windows environment or on a PC.

  In an ideal world, I would like to continue to work in the environment, I am used to use (all my favorites on OS X) when switching from time to time in Outlook for Windows to activate the Netsuite interface.

  Good speed, maybe not as fast in general, I imagine running a Windows operating system parallel through something like VM Fusion would be the option the easier for me, since I go back through the day.

  I'm not an expert user, so I need to keep things simple and stable.

  Your advice would be welcome.

  Thank you very much!

  VirtualBox is free. Parallels and Fusion are commercial products. With any VM product, if you sufficient safe, you can run the Windows host OSX reviews and use Outlook for Windows in the VM to interface with Netsuite.

  Please verify that NetSuite is supported under Windows on a virtual Mac machine.

  Another option is to use Bootcamp/Windows and use a VM engine to import the BC/Windows as a virtual machine.

• With the help of Muse for the professional design?

  Hello world

  I'm new to the world of web design, and I came Muse throughout this week while browsing for web design applications.

  Looks like this is a good starting point.

  My question is, it would really be 'ok' if someone does site professionally using Muse? I don't really know how to explain it, so I'll try my best.

  Lets say the site is super, functions as necessary etc etc, so aesthetically and feature as a customer wants.

  But if the customer comes to know he did no coding, but rather by using a program, which wouldn't not make you look less professional?

  I think it's a bit like driving a manual transmission car vs a car. When its manual it automatically gives you the impression that the driver must be better

  (which is not the case, since I myself lead them both, but prefer pure goods car), but maybe the comparison helps you better understand what I mean.

  thnks

  Depends on what the customer needs and budget. Many small businesses do not need much more than a site Web of style "brochure-ware". Muse is good for this. There are a lot of widgets and templates online to deal with many Visual tricks or other important tasks.

  Sites that have to do more complex things, like have php scripts automatically generate pages from a database and maybe even tie who, in an online store, will have to be developed with a lot of writing code.

  I'm a designer, not a computer programmer. But I'm trying to learn more about coding with HTML5, CSS3, Javascript, etc. just to improve my own skills. Many 'designer' job to any call of jurisdiction in writing code. If a person is going to be self-employed independent as a web designer, you have to master code at some point fairly quickly.

• with the help of iTFW for the removal of tracks dead

  I prefer to use other software to manage and play my media, but still rely on iTunes for tasks (for example, to manage an iPod).  Therefore, I trust iTFW (record shows iTunes) to keep my iTunes updated library...

  I had not used iTFW for a long time since giving up my iPod, but now need to use it after having opted in iTunes Music Match.  However, now and with versions of iTunes (12.4.1.6), if I want to delete detected dead titles iTunes pushes me every time "are you sure you want to delete this song?

  Apart from iTunes may delete the file (my library is backed up), but I can't approve each deletion a track of dead... and even less of them 5800...

  Of course, I am here for suggestions as to what others can do about it and what option should I use ("Download remove" or "remove song")... but I am also looking to give their comments on all people to iTunes to Apple not wanting to manage their iTunes library...

  TIA

  

  Try to connect to iTunes Music Library so that iTFW only must make in the face of content stored locally which may be missing. This should prevent iTunes questions on whether to delete the downloads or remove or hide content cloud.

  You should probably clean your copies while too disconnected. See Re: I can not find my duplicates in Itunes 12.4.

  TT2

• With the help of loudspeakers for live computer with microphone input.

  I read on here about the same problem I have but the response has been way off topic so had to ask here again. In windows XP, I could connect my microphone in my laptop and could hear myself in through computer speakers. I want to be able to do the same thing in windows vista. Can someone help me?

  Hi drwaseem,

  Welcome to Windows Vista answers Forums!

  You must Activate the Microphone

  1. connect the microphone to the computer.

  2. click on Start->-> Accessories for all programs, and then select Sound Recorder.

  3. click Start Recording (the red circle) and speak into the microphone.

  4 Recording tab showing a signal detected for the Microphone device

  Note: must have green check mark on that Microphone icon. If there is no checkmark, it means it is disabled.

  To activate the Microphone, right click on Microphone and click Activate. If you don't see the Microphone in the list, right-click on the white space and select devices see the disabled. Then, you'd see the Microphone. However, if you don't see the green check mark on it, right-click on it and click Activate. And also to select the Microphone and click on set as default (if defined as default button is active).

  For more information, you can consult the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of muse for the eBay listings

  I want to take my design of the muse and use it as an eBay listing, I really hope that it is possible. If anyone can help understand me how to get the code html to display on eBay, please respond as soon as possible, thank you!

  You can use the image of the poster for your site or the icon on the ebay listing.

  List will show the image of the model that you created, and then user on purchase can get the entire file or exported html manually on your part.

  I don't think that you need the entire html code of the site to highlight in ad on ebay for your site.

  Thank you

  Sanjit

• With the help of inputRangeSlider for Dates

  Hello

  I use 11g JDeveloper (11.1.1.6)

  I followed Duncan Mills blog: https://blogs.oracle.com/groundside/entry/using_inputnumberslider_for_dates

  I did successfully all the blog said...

  I also had the range slider on my page. However the dates aren't correctly

  As stated in the blog component inputNumberSlider a methods of bean for startDate, EndDate, and increments.

  Say is not stated in the blog...

  How could we possibly write these methods because it requires calculations of milliseconds, and it must be accurate

  Help, please

  Kind regards

  Benson

  Hello

  (1) the way I see it, the uiManager does nothing here fancy. It returns the number for the beaches in milliseconds (almost similar to hardcode). I think that the reason why you get the date 01/01 must be in your implementation of the converter (value of debug and see what exactly happens in the converter).

  (2) setting as current end date. Well, as said, the managed bean returns just long values. If the bean dateRangeSliderEndDate property Get accessor method returns something along the lines of

  http://docs.Oracle.com/javase/7/docs/API/Java/util/calendar.html

  Calendar rightNow = Calendar.GetInstance ();

  long timeInMil is rightNow. getTimeInMillis ()

  (3) to get the date in the format you want - change you a method:

  public String getAsString (FacesContext facesContext, UIComponent uIComponent, Object valueAsObject) {}

  selectedValue long = ((Double) valueAsObject) .longValue ();

  Return DateFormatUtils.format (selectedValue, "MM/dd");

  }

  A quick search on Google for DateFormatUtils

  DateFormatUtils (API of Lang 2.6 Commons)

  Hope this is enough hand-guard-body for you to complete your task

  Frank

• With the help of EchoSign for Dynamics CRM with Microsoft Outlook Client

  We have successfully integrated Adobe Echosign with Dynamics CRM 2013 (on site) and have been delivering the contract etc. through dynamic documents for almost a year. Initially, users were able to issue using the dynamic web client and Client Outlook. Unfortunately, after the client Outlook SP1 RU1, we lost the Echosign feature through the Outlook client. Client Outlook SP1 RU2 has just installed without modification to the loss of functionality to Echosign. This leaves us with a dynamic web access only if we need to issue a document via the Echosign for dynamic solution, which is frustrating for our users.  Has anyone else experienced this problem and been able to fix? Pointers would be appreciated.

  19/02/2015:

  Update - Office uninstalled and installed 32-bit Office 365. the Outlook client now works. users with Office 365 64-bit cannot send through the Outlook client. Uninstall and install 32-bit solves the problem (so far).

  Hi Steve,.

  Thanks for the update here. It seems that the 64-bit version is still having issues that is being investigated.