I am not able to connect to the internet using the Explorer 9

I am able to ping and other sites yahoo and get 0% loss on my packages but when I try to connect I am greeted with a blank page showing the Web page can't show what I can do to connect, I uninstalled and reinstalled explorer 9 and still have the same problem, I contacted my ISP and all the equipment is working properly I contacted the manufacturer of the router and the tell me that the computer may have a virus, I ran that several antivirus on the computer scans and all come clean any contributions to this issue would be greatly appreciated thanks

Advertisement

Hello
  • What were the changes made before the show?
  • Have you checked in different browser?
You can check this link:
"Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

Tags: Windows

Similar Questions

  • Not able to connect to the server with modem 56 k

    I try to connect my Tecra via modem 56 k Internet.
    Also, I tried with another computer laptop with the same details and that worked.
    But when I try it on my Tecra I get an error that is not able to connect to the server.

    So I think that it is a parameter that is not defined correctly for the modem.
    (If you compare it to another laptop all parameters are the same as windows).

    Thanks in advance,

    Theo

    Hello Theo

    Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

    After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

  • not able to connect to the game of google on mobile data store

    I bought gold x 2 lenovo 32 GB vibe.

    in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

    Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

    and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

    Please give the solution.


  • Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

    Original title: Win32/Sirefef.DAtrojan

    Recently, I got the following virus. Win32/Sirefef.DAtrojan

    I was not able to connect to the internet since then.
    Y at - there someone who can help me with the connection to the internet?
    I have a Dell XPS600
    Microsoft XP Professional

    Hello

     
    1. what happens when you try to connect to the internet?
    2 - is confined to the browser Internet Explorer problem?
     
     
    I suggest you perform a full scan of the system.
    Here is a link that will give you know how
     
     
    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  • Im not able to connect to the internet?

    Im not able to connect to the internet and the message that reeds "the instruction at"0x00bb707c"referenced memory at 0x1ab4a07 memory could not writen

    Hello

    1. don't you make changes to your computer before the problem?

    I suggest that you follow these steps and check if the problem persists.

    Step 1:

    Test the issue in safe mode with network.

    Step 2:

    If it works fine in safe mode with network, turn on your computer in a clean boot State and check if the problem persists.

    Note: Don't forget to restart your computer as usual.

  • Not able to connect to the server via the AFN TCP

    Hi all

    After Googling carefully I finally decided to post my problem which is really sent me nightmares.

    In my application, I try to connect to a TCP server by using the operator of internet network and after the connection string

    URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; connectionTimeout = 30000; APN =; tunnelauthusername =; tunnelauthpassword =; » ;

    I am able to connect to the internet using the phone's browser, but not able to connect to the TCP server via app.

    In my device APN authentication is disabled by default and the AFN, the name of user and password fields are white that's why I took these settings like white with a value in the connection string.

    When I try to connect via wifi network using the suite of string

    URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; interface = wifi; connectionTimeout = 30000;

    I am able to connect to the server, but not in the case via the AFN.

    Please help me...

    I'm here just stuck and not finding a way out.

    Thank you

    Finally I found the solution to the problem...

    I used ConnectionFactory (network API) to connect to the TCP server and the used connection string is just

    'socket://127.0.0.1:8089 '.

    No need to specify the APN, user name, and password.

    Here's the code used

                     ConnectionFactory connFact = new ConnectionFactory();
                      ConnectionDescriptor connDesc;
                      connDesc = connFact.getConnection("socket://127.0.0.1:8087");
    
  • I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

    Connection to the local network - properties dialog box

    Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

    Hello Rajaneer,

    Is the computer that you are using a personal computer or a work computer?
    You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  • Not able to connect to the user account, error: user profile Service has no logon

    I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

    Where and how can I fix it?

    Thank you.

    Larry

    Original title: need help with setting up an account

    Hi Larry,
    Thanks for posting your query in Microsoft Community.

    From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

    This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

    If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

    To resolve the problem with the user account, you can follow these steps:
    Method 1:
    (a) click Start, type regedit in the start search box, and then press ENTER.
    (b) search for, and then expand the following registry subkey:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

    (c) right click the SID that you want to remove, and then click on remove.
    (d) log on to the computer and create a new profile.
    You can also check this link:
    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Method 2: Also, see the steps in the following Microsoft article:

    (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

    If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

    (b) how to back up and restore the registry in Windows
    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    For any Windows help in the future, feel free to contact us and we will be happy to help you.

  • I am not able to connect to the links in the emails that I receive. When I click on a link highlighted blue, I get a box that says, "this operation has been cancelled due to restrictions in effect on this computer"

    I am not able to connect to the links in the emails that I receive. When I click on a link highlighted blue, I get a box that says, "this operation has been cancelled due to restrictions in effect on this computer"

    Maybe this?

    http://support.Microsoft.com/kb/310049

    Assuming you are using Outlook, which you failed to mention

    Thank you very much, it worked! Yes, I use Outlook, sorry I mentioned not just but good guess. Thank you very much for the help.

  • Not able to connect to the homegroup, it requires username and password

    Original title: h/group connection on my year old d/top & my l/top 6 months, does not. Says I need a/c p/word-WHERE is it? I need to change the system time that is differs from earlier local. - thank you - Stantheman

    Both computers are windows 7. Recently uploaded photo gallery on both, but because they won't talk to each other, I have to copy / paste from one to the other...

    I'm 79 and reasonable computer. Daughter 51 tried very hard, but without success.

    Hi Stanley,

    Welcome to the Microsoft community. As you are not able to connect to the Homegroup, answering a question that helps us provide the best solution:

    What antivirus software do you use?

    Here are a few steps to try:

    Visit the link to check if the homegroup settings is set correctly:

    Homegroup from start to finish
    http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

    Method 1:
    Visit the link and try the troubleshooter.
    Open the homegroup troubleshooting utility
    http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

    Method 2:

    Visit the link to learn more ways to connect to the Homegroup.

    Why I can't join a homegroup?
    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

    Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

  • I am not able to connect to the HFR (11.1.2.4) studio

    Happy holidays / Merry Christmas!

    My colleagues are able to connect to the HFR (11.1.2.4) studio using the http://servername:8200 / from their laptops

    I am not able to connect to the studio HFR (11.1.2.4) from my laptop.  I get this error message:

    Error 404 - not found

    Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1:

    10.4.5 404 not found

    Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

    If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.


    No idea why?

    Please look at the KM and see if it helps...

    After installing Financial Reporting (FR) Studio under Windows 7, an error at the launch: "run-time error '429': ActiveX component can't create object ' (Doc ID 2011899.1)

  • Impossible to launch the store "we were not able to connect to the store.this could not have due server problem or the network connection has expired.

    Original title: PROBLEM WITH WINDOWS STORE

    Hi, I'm a first year student at IIT MADRAS. I just got a new laptop (W8, 4 GB RAM, 320 to drive HARD, I3). I had problems to open the store. He said: "we were not able to connect to the store.this could not have come because of problem with the server or the network connection timed out." My connection to the local network requires the proxy settings. PLEASE HELP ME.

    Hello

    Yes, the speed and connectivity of the internet must be consistent for the applications to work properly.

    I suggest you create a new user account and checkif the problem persists.

    Create a new user account.

    Setting up a new user account is a very easy process in Windows 8. There are two types of user accounts, a Microsoft user account and a Local user account. See this link for more information on the two types of user accounts and how to create them.

    http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

    Try to connect with the user account that is having right of the administrator and check if the problem persists.

    I hope this helps. If you have any other questions, please get back to us and we would be happy to help you.

  • Not able to connect to the essbase server: error 10061 NW

    Hi all

    I am currently working on Hyperion 11.1.2.3 and have installed Hyperion essbase and planning for the same thing. Until a few days back I was able to connect to my server essbase in environmental assessments, but now it gives me error that says: error: 1042006: Network error [10061]: unable to connect to [WIN - 1K6GBOF63C0:1423], where WIN-1K6GBOF63C0 is my machine name.

    Here is an excerpt of what I got from the newspapers essbase

    [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051283)

    Recovery of license information, please wait...

    [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051286)

    The license retrieved information.

    [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1051227)

    No JVM location specified in essbase.cfg. Will attempt to load the library path

    [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1311019)

    During the initialization of the JVM classpath: [; C:\Oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbase.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbaseRegistry.jar]

    [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051223)

    Single Sign-On [css_init] function call failed with error [error CSS: CSS method invocation of error: getInstance: impossible to get the instance of CSSSystem, please visit SharedServices_Security_Client.log for more information]

    [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051198)

    Single Sign-On initialization failed!

    [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1056815)

    Essbase 64-bit - version 11.1.2 (ESB11.1.2.3.000B4412)

    [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051232)

    Using [email protected] as the locale Essbase

    [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051683)

    Try to recover the login information from the registry failed. Please check the reg.properties file, and then try again.

    [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051527)

    Shared Services security mode it is not possible to start Essbase during SSO to the initialization fails.

    I am able to open the workspace's shared services, but see the following in the Sharedservices_securityclient log

    [2015 07-12 T 00: 26:41.418 - 07:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A6jgDwW05zzWByW1LcXQY000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] failed to initialize the instance security EMP of Shared Services. Component marchandises9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is set to null in the EMP system registry. Check the configuration of the EMP system registry.

    [2015 07-12 T 00: 28:51.332 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

    [2015 07-12 T 00: 28:51.403 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20002] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.EPMSystem] [SRC_METHOD: getInstance] instance of security during the initialization of the SSP using the EMP system registry. It is a status messages. No action required.

    [2015 07-12 T 00: 28:52.340 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

    [2015 07-12 T 00: 28:53.184 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

    [2015 07-12 T 00: 28:53.606 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20005] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] started asynchronous user directory cache building user native Directory directory. Status message. No action required.

    [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20007] [oracle. EPMCSS. CSS] [tid: 12] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0:3] [SRC_CLASS: com.hyperion.css.cache.ProviderCacheThread] [SRC_METHOD: run] group cache filled to the user native Directory directory and the size of the cache of the group is 1. Status message. No action required.

    [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20331] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] building Cache is for providers, has now begun to unify the cache. It is a status messages. No action required.

    [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20332] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] unify done cache and the object is set to the cached cache manager. It is a status messages. No action required.

    Any help is appreciated here.

    Thank you

    Dev

    The error being generated using relates to Essbase is not able to connect to the registry of SSP database, or the database is corrupt.

    Are a set of services to automatic, maybe that the database has not increased and running prior to Essbase trying to boot against the register of Shared Services.

    Confirm the relational database is finally up and running and you can connect, then clear the Essbase logs, start Essbase, and post again the same newspapers.

    See you soon

    John

  • I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

    Hi, I'm a newbie to Vcenter.  I just found out that I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

    Hello Cy1989,

    Check the items below in your vCenter server.

    1. check that VMware VirtualCenter Server service is started otherwise starts pls start...

    2 Vefiry VMware VirtualCenter Management Web Services is started otherwise start pls start...

    3. check that the configuration of the ODBC Data Source (DSN) used to connect to the database for vCenter Server is correct.

    4 Vefiry database are running and all required database services are running...

  • ATG CIM: Not able to connect to the JDBC database: thin

    Hi all

    I am trying to configure an ATG environment on windows boxes. Here is the configuration:

    VM1) DC - Windows domain controller (Windows Server 2008)
    VM2) javadb - Oracle 11 g (Windows Server 2008)
    VM3) javaweb - ATG 10.0.3 / wlserver_10.3 WebLogic / TomCat 7 (Windows Server 2008)

    Installation / installation of the progress
    * Installation of oracle 11g successful. Sample DB was created successfully.
    * WebLogic successful installation. Base_Domain was created successfully.
    * Able to create the successful connection to Oracle (javadb vm) TomCat (javaweb vm) and query data

    Error: when configuring CIM I get in > > 'not being able to connect to the database jdbc:oracle:thin:@javadb:1521:SampleDB @ scott'+ _

    Corrective measures already taken:
    (1) disabled firewall on all boxes
    (2) path added in Environment Variables (ojdbc6.jar) JDBC driver
    (3) tested Oracle 11 g (javadb vm) connectivity of Eclipse and Tomcat. Who is successful
    (4) deleted all the files under C:\ATG\ATG10.0.3\CIM\data to reset the CIM

    Please see the CIM details below:
    ===========================================
    CIM DISPLAY START
    ===========================================

    -ENTER CONNECTION DETAILS-
    Enter [h] ELP, ain menu [m], [q] ITU to exit


    Production base


    Select the Type of database

    * [1] thin oracle
    [2] MS SQL
    [3] iNet MS SQL
    [4] DB2
    [5] my SQL

    Select a > 1

    Enter the user name [[System]] > scott

    Enter the password [*] > *.

    Password > *.

    Enter the host name [[javadb]] > javadb

    Enter the Port number [[1521]] > 1521

    Enter the name of the database of [[sampledb]] > SampleDB

    Enter the URL of database [[jdbc:oracle:thin:@javadb:1521:SampleDB]]
    >

    Enter the path of the pilot [[C:/Oracle/Middleware/wlserver_10.3/server/lib/ojdbc6.jar]]

    Enter the name of the JNDI [[ATGProductionDS]] >

    -CONFIGURE DATASOURCE PRODUCTION CORE-
    Enter [h] ELP, ain menu [m], [q] ITU to exit



    [C] the connection Details - facts
    * [T] the connection Test
    [S] create a schema
    Import initial data
    [D] drop Schema
    [O] set up another source of data

    > T

    -TEST DATA SOURCE CONNECTION-
    Enter [h] ELP, ain menu [m], [q] ITU to exit


    Production base


    > > Not able to connect to the database jdbc:oracle:thin:@javadb:1521:SampleDB @ scott


    ===========================================
    CIM DISPLAY END
    ===========================================

    ===========================================
    BEGINNING OF LOG CIM
    ===========================================
    WARNING my Jul 23 22:46:25 IST 2012 1343063785645 atg.cim.worker.status.StatusUpdateValidator id nonswitchingCore-DatasourceConnectionTemplateStep Status is unknown.
    Mistake my Jul 23 22:46:32 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator IST 1343063792213 of 2012 is not able to connect to the jdbc:oracle:thin:@javadb:1521:SampleDB database: java.lang.ArrayIndexOutOfBoundsException - 1:-1
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to oracle.jdbc.driver.T4CTTIoauthenticate.setSessionFields(T4CTTIoauthenticate.java:948)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to oracle.jdbc.driver.T4CTTIoauthenticate. < init > (T4CTTIoauthenticate.java:225)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:358)

    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:538)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to oracle.jdbc.driver.T4CConnection. < init > (T4CConnection.java:228)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to java.sql.DriverManager.getConnection(DriverManager.java:582)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to java.sql.DriverManager.getConnection(DriverManager.java:185)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.service.jdbc.BasicDataSource.getDriverManagerConnection(BasicDataSource.java:526)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.service.jdbc.BasicDataSource.getDriverManagerConnection(BasicDataSource.java:588)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.service.jdbc.BasicDataSource.getConnection(BasicDataSource.java:475)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.service.jdbc.FakeXADataSource.getXAConnection(FakeXADataSource.java:671)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.service.jdbc.MonitoredDataSource.createResource(MonitoredDataSource.java:837)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.service.resourcepool.ResourcePool.populateSlot(ResourcePool.java:2064)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.service.resourcepool.ResourcePool.checkOut(ResourcePool.java:1332)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.service.jdbc.MonitoredDataSource.co(MonitoredDataSource.java:1792)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.service.jdbc.MonitoredDataSource.getConnection(MonitoredDataSource.java:1070)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.worker.databaseconfig.TestJdbcConnectionValidator.performTestConnection(TestJdbcConnectionValidator.java:319)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.worker.databaseconfig.TestJdbcConnectionValidator.validate(TestJdbcConnectionValidator.java:266)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.executeValidations(StepExecutor.java:280)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.ui.text.TextDisplay.processStep(TextDisplay.java:338)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.ui.UIDispatchImpl.processStep(UIDispatchImpl.java:89)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.processStep(StepExecutor.java:201)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.processCurrentStep(StepExecutor.java:80)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.runner.Runner.run(Runner.java:152)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.types.LaunchTemplate.execute(LaunchTemplate.java:69)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.CommandExecutor.execute(CommandExecutor.java:128)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.CommandExecutor.executeCommands(CommandExecutor.java:156)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.processStep(StepExecutor.java:129)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.processCurrentStep(StepExecutor.java:80)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.runner.Runner.run(Runner.java:152)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.types.LaunchTemplate.execute(LaunchTemplate.java:69)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.CommandExecutor.execute(CommandExecutor.java:128)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.CommandExecutor.executeCommands(CommandExecutor.java:156)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.processStep(StepExecutor.java:129)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.processCurrentStep(StepExecutor.java:80)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.runner.Runner.run(Runner.java:152)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.types.LaunchTemplate.execute(LaunchTemplate.java:69)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.CommandExecutor.execute(CommandExecutor.java:128)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.CommandExecutor.executeCommands(CommandExecutor.java:156)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.processStep(StepExecutor.java:129)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.processCurrentStep(StepExecutor.java:80)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.runner.Runner.run(Runner.java:152)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.types.LaunchWizard.execute(LaunchWizard.java:73)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.CommandExecutor.execute(CommandExecutor.java:128)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.command.CommandExecutor.executeCommands(CommandExecutor.java:156)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.processStep(StepExecutor.java:216)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.step.StepExecutor.processCurrentStep(StepExecutor.java:80)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.runner.Runner.run(Runner.java:152)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.flow.CimFlow.startupFlow(CimFlow.java:69)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.flow.CimFlowCreator.startDefaultCimFlow(CimFlowCreator.java:78)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.Launcher.startCimFlow(Launcher.java:168)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator to atg.cim.Launcher.main(Launcher.java:68)
    Error my Jul 23 22:46:32 IST 2012 1343063792213 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator
    Error my Jul 23 22:46:32 IST 2012 1343063792218 atg.cim.worker.databaseconfig.TestJdbcConnectionValidator connection parameters initialization error. Test for the jdbc connection failed
    ===========================================
    END OF JOURNAL OF CIM
    ===========================================

    Any suggestion how to fix this problem. Thanks in advance.

    see you soon,
    Sandeep

    Published by: 948180 on July 23, 2012 23:29

    Environment variable PATH is for executables.

    Environment variable CLASSPATH's for the class files. Then create CLASSPATH as the variable name and place the path to your ojdbc.jar as the value for it

    -Kiss

  • not able to connect to the database using the oracle instant client

    Hello

    I am not able to connect to the database using the instant oracle from my local PC client. They use to connect to the database files and sqlnet.ora files LDAP.ora. If I want to test the connection, I found this executable tns wasn't there, so not able to tnsping. So I'm not able to solve this problem.

    Please let me know if a solution for everything

    Client Oracle: oracle 10.2bFAT client 32-bit

    Platform: windows 7 64-bit

    Thank you
    Veera

    There is little that tnsping can do sqlplus can't.

    Instead of
    tnsping mydb.myorg.com
    Try
    sqlplus-s-L /@mydb.myorg.com
    or
    sqlplus-s-L user/[email protected]

    If you get
    ORA-12154: TNS: could not resolve the connect identifier specified
    you know that the customer could not resolve 'mydb.myorg.com '.

    If you get
    ORA-12541: TNS:no listener
    then "mydb.myorg.com" could be resolved, but there is no listener it running.

    If you get
    ORA-12514: TNS:listener is not currently of service requested in connect descriptor
    then "mydb.myorg.com" could be solved, the listener is in place, and the database is out of service.

    If you get
    ORA-01017: name of user and password invalid. connection refused
    you know that 'mydb.myorg.com' has been successfully resolved, and the database is running.

    If you want more details, such as how and what "mydb.myorg.com" is resolved, turn the tracking by adding the following to "sqlnet.ora:
    TRACE_LEVEL_CLIENT = ADMIN
    TRACE_DIRECTORY_CLIENT = C:\TEMP (a writable directory)

    Then you will find lines like this in the trace file:

    -THE INFORMATION SOURCE PARAMETER FOLLOWS-
    Attempt to load system pfile source C:\oracle\network\admin\sqlnet.ora
    Source of the setting successfully loaded

    Attempt to load the local pfile source C:\Dokumente und Einstellungen\lanadvall\sqlnet.ora
    The parameter source has not been loaded.

    This shows you which configuration files are read, followed by the settings real read.

    nnfgrne: will read if path adapters
    nnfgrne: switching adapter LDAP

    He's now looking for LDAP name resolution.

    nnfloidinfocache: Info: insert the value DIRECTORY_SERVSSL = oid.host.myorg.com:389 at index 0 in NLPA_CACHE

    These are LDAP servers, he is trying.

    nnflilc: conn sync opening of oid.host.myorg.com:389

    nnflfdn: turning simplified mydb.myorg.com name to a unique name.
    nnflfdn: using the administrative context: dc = prod
    nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = com

    nnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
    nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)

    nnfgrne: query fails, the leap to the next map

    Did not work. Try the other adapters:

    nnfgrne: switching adapter EZCONNECT

    snlinGetAddrInfo: name resolution failed for test64.test

    No luck.

    If the resolution is approved, it will look like this:

    nnfloidinfocache: Info: insert the value DIRECTORY_SERVERS = oid.host.myorg.com:389 at index 0 in NLPA_CACHE

    nnflilc: conn sync opening of oid.host.myorg.com:389

    nnflfdn: turning simplified mydb.myorg.com name to a unique name.
    nnflfdn: using the administrative context: dc = prod
    nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = com

    nnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
    nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)

    niotns: the call to address: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dbserver.host.myorg.com) (PORT = 1521)) (CONNECT_DATA = (SID = DBNAME) (CID = (PROGRAM = C:\Oracle\ora1020\bin\sqlplus.exe)(HOST=pc247596)(USER=lanadvall)))

    Yours,
    Laurenz Albe

Maybe you are looking for

  • Is there a way / shortcut so that you can open more than one message into several tabs?

    I just want to know if there is a way to open several messages in multiple tabs? Rather than select one at a time to open a tab, one at a time. I want to select more than one message and then right click on a command or press a command button control

  • BlackBerry Smartphones BlackBerry fallen on hard ground.

    I dropped my BlackBerry Curve 8530 on the tiles, the phone seems to work as usual, no scratches, cracks, etc., but I know how everything works correctly? Could there be an underlying problem that causes the device to stop working? Please answer my qu

  • IdP custom self-signed certificate with error "Exception in law Service...". »

    Hi allWe strive to use the identity provider 2 OAuth with self-signed SSL certificate and it seems that this approach are not supported by the system.OAuth authentication endpoint is not accessible from the mobile application - Chrome debugger HTTP c

  • Work station 9 and Ubuntu 12.04 HostOS

    Anyone know when Workstation will support Ubuntu 12.04 as a host operating system.  It is now the 2nd (or is it the 3rd) since Ubuntu 12.04 is out and still no host OS supports.  There was a public work-around to get WS8 update 2 and 3 to work on 12.

  • 4.1 582267 Vmware ESX tools

    I moved a vm (Server 2003) to this host and I get:"No VMware Tools package is available.The VMware Tools package is notavailable for clients to usesystem 'others '. »vCenter 4.1 can not install the package tools? ISO does not exist?Call "VirtualMachi