I am restoring an old Optiplex GX260 after updating the operating system to SP3 NET. Bulid 4.0 I lost all control.

Similar Questions

• Battery problems of Smartphones from blackBerry after updating the operating system

  Hello world:

  I have updated my OS (Torch 9800) 6.0.0.576 and after that, battery life decreased significantly. You have an idea on the problem/solution? I replaced the battery and the problem remains the same!

  Thank you!

  joelg

  On device, go to Options, device, application management is a great way to see what your applications with your use of the CPU on #Torch. Simply drag bar greater than CPU and see what happens. Also touch the CPU menu to see other time variables. I discovered that an application has been eroding CPU cycles on my own

• Cannot see network on XP Server after reinstalling the operating system

  After reinstalling the operating system on our server, I can't see our server on the network. In the Service list after going to TCP/IP--> INSTALL network, I do not see "Sharing files and printing for Microsoft networks" in the category of SERVICES.
  I see all the other nodes in the network (which consist of several Win7 and Win XP machines).

  Hi BigGtheDood,
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• XP SP3 no sound after reinstalling the operating system

  Hello

  I have re-installed the SP3 of XP on my Toshiba laptop and it has no sound after that. You may have installed the operating system in "secret" mode and so there is no sound.

  I checked the audio settings are that all settings are correct.

  Is it possible to go back again to the sound.

  Kind regards

  R

  Hi RAJRAU,

  You can try to check if the onboard sound is disabled by checking the advanced settings of the BIOS.

  If so, try allowing it and see if it helps.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also read the following article and try the steps to solve the sound problem:

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-us/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• You can restore a version of Office after a reinstalled operating system by using the office on the left on the system files?

  Basically, to solve a problem with my computer, I had to reinstall my OS (xp), but after installing my copy of Microsoft office stored elsewhere on the system is now does not, is their anyway to recover the files without reinstalling, or to get the license key it?
  Thank you

  . No..

  You need the product key and installation media.  Both are things that you should have, regardless of how the original system has been provided to you, if you own the product.

• Gmail no longer works after reinstalling the operating system

  I posted on a forum for Gmail and no one answered. But on the fact that I can access these gmail accounts via web browser and Microsoft Office, I think there must be a problem with the configuration of Mac. I'd like some suggestions to solve my problem!

  Recently, I have reinstalled the OS El Capitan on my MacBook Pro 2013 retina. Before the reinstall, I could access all my Gmail accounts through the native application of Apple Mail. Since then, I couldn't access any of my Gmail accounts via Apple Mail.

  I tried to disable the two-step verification, but which is not resolve it.

  I deleted all count them several times and follow the steps below, but still can not get added (don't say one of the definitions to be insane is doing the same thing twice and expects a different result?

  Here are my steps that I take every time:

  When I connect, I use my Gmail password.

  Accounts/new Internet account

  Select Google

  Enter my user name and click Next

  Enter my password (not the specific app password, but the password for Google. I tried both and he always tells me that I have to use the Google password.)

  Click next

  The dialog box then says "select the applications you want to use with this account (and the logos of Google lies at the top of this box.).

  My options are:

  Mail

  Contacts

  Calendars

  Messages

  Notes (all logos Mac for those apps)

  All are checked, but I uncheck everything except Mail

  Click done.

  The gray button 'Complete' on

  Finally after that probably 60 to 90 seconds, I get a message through Mac OS that says 'Google account you added'"[email protected] has been added.

  In this box, I gives me the options of 'Not now' or 'enable '.

  If I select 'Enable', then I get the message through Mac OS that says 'Google password required'. I get my password, and the cycle repeats again and again.

  If I select "Not now" then the account appears as 'Inactive' in my list of accounts on the internet. Once I selected, I am immediately invited for the password... and the whole process starts again.

  Facts:

  Accounts are active IMAP.

  Accounts have two factors of authentication disabled. If I turned it on, the same things happen, with the only exception to receive messages and receive through my method to deliver, security code, but once I entered it, it can still access my mail.

  I have four other Gmail account, and what is happening in the same way with them all.

  They are all very well via a browser-based email

  They are all accessible through my iPhone and iPad.

  I can't access any of them through the native mail app Apple.

  They are all accessible through Microsoft Outlook e-mail client (2016)

  I even tried to disable the option to allow 'less secure apps.  I tried it on and outside, and nothing works.

  I'm ready to give up all my Gmail accounts at this point.

  Any ideas (other than to get rid of Gmail!)

  If you have not tried this, after completing the settings, try to delete Internet accounts. Go to Mail/preferences/accounts, and then add the accounts there.

• hpc309a will not print in color. black printing after upgrading the operating system

  Issue began immediately after the upgrade to mac Snow Leopard 10.6.8. Yes, the cartridges are fine. I downloaded the latest drivers and firmware. I chose the best and high quality paper during printing. Still nothing.

  OK, so the printer is at fault.  First of all, try to clean the holes in the cartridge by following the instructions on this page: http://support.hp.com/us-en/document/c02253171

  If this doesn't work, remove all the cartridges, and then lift the latch on the right side of the cart and remove the print head Assembly.  Clean the electric contacts with a damp cloth not fluffy (the fabric will be ruined with ink), then rub the surface of contact on the cart.

  Reinstall and start over.

• BlackBerry 10 same after upgrade to 10.3.1 I'm always being invited to update the operating system

  Model - Q5.

  OK, so after much trouble I took to remove some Apps etc to make room for my Q5 upgrade to version 10.3.1.2243, I finally managed in the upgrade of the phone. Shortly after, just at the moment where I thought I was ready, I started to receive upgrade notifications again and this time I was prompted to release an another 1.7 GB of my phone, which is practically impossible. The updated version that I'm being invited to space costs for is 10.3.1.1565.

  When I connect through Blackberry link, it shows my software as an update with the version 10.3.1.1565 installed. Can someone please tell me what's going on, because there is no way I can create an extra 1.7 GB of space for a new update.

  Screenshots of the issue are attached for your reference.

  Thanks in advance.

  

  

  

  I suggest that you close the update for now.

  Do a restart: with the phone smart BlackBerry power on, press on and press and hold the power button on top about 20-30 seconds, ignore the 3-2-1 timer and hold the button until the screen goes black and you see the red LED.
  or
  Restart: With the phone smart BlackBerry turned on, using the keys of volume of the edge side, press on and hold the keys of volume for about 20 seconds and both of the Up, ignoring the initial message of screenshot... the screen go black, reboot.

  Now, back to settings > software updates and see if it runs.

• Import or export all bookmarks after upgrading the operating system

  I did an upgrade of the OS and I want to know how do I import or export my favorites Mozilla Firefox in my new OS upgrade?

  Excellent Keshav. It worked perfectly, I got teamviewer and transfer of files, I was able to migrate my Firefox on my laptop to my new windows 8 OS pro in my Firefox browser. Thank you for your help.

• Satellite M30-S350. Fn keys do not work after reinstalling the operating system

  I reinstalled the system on my laptop and now the Fn keys do not work. How do adjust me them? And yet... How to disconnect the touchpad?

  Hello

  It seems that what he is an American unit and was designed specially for the American market.

  But have you used the Toshiba Recovery CD?
  If this isn't the case, then you must install all the drivers Toshiba and utilities in the correct order.
  Chipset utility
  common modules
  graphic driver
  etc.

  The FN keys supports different function. To use these options, you will need several drivers. For example, use the FN + F5 (the display switching), to the Toshiba Hotkey Utility to display the devices & Toshiba display device change Utility and toggle the Touchpad to install Toshiba Touchpad enable/disable utility

  As you can see it good drivers are needed. Please visit the Toshiba us and download the right driver for this laptop

• USB ports do not work on satellite 40 X after reinstalling the operating system

  Hi all

  I formatted my laptop X of Equium 40 recently and since then the USB ports are not recognition of everything that is plugged into the port.
  Can anyone provide me with the drivers. I use Windows XP Professional.

  Thanks in advance
  SKP

  Hello

  It seems that you have installed the CD Microsoft Windows operating system and not the Toshiba Recovery CD
  In this case, the installation of Toshiba drivers available on the driver page is necessary.
  Have you installed all the drivers in the correct order?

  For most installation instructions are placed on the driver page, and you must always follow the order of installation recommended in this document.

  Have you installed the chipset utility? This Intel application is one of the most important applications and must be installed at the beginning.

• HP625 the on-screen display missing after reinstalling the operating system

  Recently, I completed a new installation for Windows 7 x 64. Previously, I had Windows 7 x 86 which I completely wiped out. The problem is now my screen display is more working.ie. No volume control, no screen display setting of brightness, no bluetooth switch or wifi enabled, no display to indicate that when I connect to a projector or during prolonged use of screens.etc. can someone help me please on how I can get this software again on my machine. I tried to look around on the internet. Any help in this regard is highly appreciated.

  Thank you

  Yes! Found the solution, all that was required was to install hotkey support to the HP625 and other related models. To install, use the following link: HP hotkey Support

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=uk&prodTypeId=321957&prodSeriesId=4173277&prodNameId=4173278&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-90952-1>

• BlackBerry Z10 space bar issues after upgrading the operating system

  My space is faulty because I updated the OS to 10. ; 2.1.2977. I type and just strings together.  To operate press the button several times or even extra firm-press in order to work - driving me crazy!  What can I do?

  You have restarted your device since the upgrade?

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.

• BlackBerry smartphones can not access to MMS and Internet after upgrading the operating system

  Hi all. I am a new user of BB. I got my Curve 9300 three weeks back. As soon as it has been recorded, I was invited 2 upgrade operating system - which I made and subscribed 2 BB Protect. A friend sent me a MMS, but I can't consider my settings r bad. I cannot access the internet most of the time, but can still access site BBerry. Help, please. My carrier is MTN

  OK... so you should do the last thing that I have loaded... contact your operator for formal support. It's them you pay for your service... and they deliver it.

  Good luck!

• Element of the menu blackBerry Smartphones lost after upgrading the operating system

  Updated my Blackberry 9700 OS 6 yesterday.  Since then, Blackberry app world has disappeared from the menu but it is obviously always on the phone told me when I tried to download it again then.  How do go back in the menu?

  Thank you all - I actuall solves the problem by downloading again and reinstall.  Could not find any of the paths specified in the options of the home screen