I am trying to burn a cd on iTunes and it says __Non supported drive found... burners _ so I click on burn, then says Disc Burner or software not found.
I try to reinstall the program, but it simply doesn't.
Help, please!
Hello
Having too many CD/DVD programs can cause problems, in particular those charged pieces of
themselves at startup. Try to uninstall iTunes and more recently added (not those
included with your computer) to see if that helps.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
Im trying to register my Photoshop elements 11 and it says that my email is not valid
Hi - I bought PSE11 (6 upgrade!) and installed it successfully.
I then got a apple on this site using my email - ID and that was very good.
Now I am recording software (he keeps asking me to do on the load), but it says that my email is not valid - although it is the email that I used here - IE my email Apple ID.
Is it because my site http://bullion.directory using one of the many new GTLDS and older software such as items 11 do not believe that the field exists?
If so, can I set up an OTHER ID with another email? Sounds crazy...
Or is it possible to apply directly to the breast of my apple on adobe.com ID and cut the software altogether?
Thank you very much!
Is it possible to register only a product my Apple ID, online?
# You can use the same e-mail address that you use for your apple ID, but you cannot just use the Apple password (and it would be a bad idea, if you could, for reasons of security).
-
my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?
Hello
Follow the instructions here:
-
I am suddenly unable to burn playlists to CD on my MacBook Air. I burned a CD only 2 days ago.
Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1
Hi BVBigelow,
I understand that you are not able to burn playlists in iTunes on your MacBook Air. Fortunately, we have an article (link below) which details a number of steps that can help to restore your ability to burn CDs of troubleshooting.
12 iTunes for Mac: If you have trouble burning a disc
Take care!
-
Error message: burner or software not found when burning CDs using iTunes.
Original title: help please!
I'm tring to burn a cd from itunes and it says not found burner or sofeware. What should I do about it?
Hi Dawnso,
1. what happens when you try to burn a CD using iTunes?
2. you receive messages or error codes?
You can see the article next to the Apple support and check if it helps.
iTunes for Windows: additional troubleshooting questions burning tips
Can't burn a CD in iTunes for Windows
You can also chack if you are able to burn CDs with Windows Media Player.
For more information, you can read the following article.
If you still need help, you could get in contact with Apple support.
Hope this information is useful.
-
original title: signature of my hotmail account
I am trying to disconnect from my hotmail account and it says I need to enable cookies in my browser. How do I do that?
http://Windows.Microsoft.com/en-AU/Windows-Vista/block-or-allow-cookies
Block or allow cookies
This information applies to Windows Internet Explorer 7 and Windows Internet Explorer 8.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For Hotmail issues:
http://www.windowslivehelp.com/
Use above Forums, after that they are finished their maintenance.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: Hotmail
I have not received e-mails from last week. I just tried to send a test email and it says that my account is not available?
The first step in troubleshooting is to clear browser cache/cookies. (you must clear all cookies)
* For Internet browser explore & MSN butterfly: simultaneously press CTRL + SHIFT + DELETE, and then click on remove
For Google Chrome: Simultaneously press CTRL + SHIFT + DELETE, and then click clear browsing data
For Firefox: Press CTRL + SHIFT + DELETE, and then click clean now
(other browsers are similar)If you clear the cache is not help meet these.
You access your e-mail via a web browser or e-mail client? See the differences between them here
You have problems to access other accounts on the same computer?
The same problem exists when you use a different browser?
The problem persists on other computers? -
I tried to acivate the code to get the license for photoshop cs6 extended student and teacher edition for mac and it says that the code has not been activated. Am I missing a step?
Using redemption code
http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html
-
Error - 36 trying to copy iTunes and iPhoto on external hard drive?
So today, I tried to back up my iTunes and iPhoto libraries on an external hard drive before upgrading my OS, but I am getting error-36 for several files in iTunes and iPhoto. How can I fix it so I can save them? (on my drive hard, the permissions are checked and the hard drive is formatted as Mac OS extended (journaled))
Finder - How to quickly fix the error Code-36 in the Finder of Mac OS X
Finder - Mac error Code 36 during file transfer
Finder - What to do about error-36 and other errors of i/o in OS X
-
disc burner or software not found message when you try to burn a cd on my macbook pro osx
I'm used to be able to burn CDs. not so much anymore. I don't give no disk this burner or software offered. even after the update to itunes.
I'm used to be able to burn CDs. not so much anymore.
That means even some Yes? If so, when? If you mean any please tell.
even after the update to itunes.
When what you did to update iTunes? You have restarted the computer since that?
-
I can not connect when I turn on my computer the error messege says that it has been properly closed. Him freezes just screen (black), I tried to stop and restart several times, and produce the same results. All started when I tried to get my 'new' Hp keyboard to work in ports at the back of the tower. That didn't work so I tried to use my old keyboard in the same port, in vain. I ended up having to use the USB ports on the front of the tower to get a keyboard work. Good so I know I messed up when I downloaded a driver tech program. All successful going great until I tried to turn my computer on this morning the screen BLACK nothing. The error message says that it computer was shut down improperly and now it will not load.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Why Apple Support community-is such a maze. Surprisingly, after much effort, I have a question was asked and answered to (helpful but not completely). In trying to follow up, I have found no direct link in my email, no way to find my name in the communities of support and no way to push my question to the next level.
I know now how to disable "shuffle" in my ITunes on my IPhone. Is not very intuitive, as some helpful person has said. Also, the highlight on the button 'shuffle' is unnecessarily pale. So now, because since then, shuffle returned requiring manual turn off again, is there some default to shuffle? I've experimented with compensation the ITunes program and with the phone turned off/on. Neither returned me shuffle.
By clicking on your name will take you to your bio page:
Click on content and you will see what threads that you have created or participated.
Can't help with your problem else I don't have an iPhone; someone else will be hopefully chime.
-
trying to update my i pod on itunes when it arrives at the last minute, it says connection has expired, anyone can help
Ask the question in the Apple Forums:
https://discussions.Apple.com/index.jspa -
When I try to open and play a dvd using WMplayer I get a message that I must have a compatible dvd decoder to read the dvd that I want to watch. Can you tell me where I can get it. I only want to look not to burn.
Hello
Welcome to Microsoft Windows 7 answers Forum!
Now, you must follow the link provided below and check if the problem is resolved by purchasing a DVD Decoder Pack add-on.
http://www.Microsoft.com/windowsxp/using/Setup/expert/bridgman02april15.mspx
There are now available at the following link DVD decoders:
Info about DVD decoders:
Plug-ins for Windows Media Player
http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspxNote: Note before you perform the steps above, you must create a restore point on your computer and check for the problem that you encounter on your computer to do that you must follow the steps below.
1. open the control panel (all items view).
(A) click on the system icon.
(B) proceed to step 3.
or
2. open the Start Menu.
(A) right click on the computer button and click Properties.
3. click on the System Protection link.
4. close the system window.
5. check to make sure you have System Protection turned on for the list available on the disc, that you want to create a restore point, to include in the restore point.
6. click the Create button
7. enter a description to point restoration in order to recognize it when you do a system restore and click on the button create.
8. you will now see this as the restore point is being created.
9. when the restore point is finished being created, click on the close button.
10. click on OK.
If you still experience the problem, you must contact the support Windows XP Forum for this you must follow the link below.
http://answers.Microsoft.com/en-us/Windows/ee514983.aspx
Thank you, and in what concerns:
Aito - Microsoft technical support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.
-
Whenever I try to download this thing from a Web page I know is safe, he said that the link cannot be created. How can I do so im allowed to download?
What web browser do you use? Have you tried to use an alternative web browser? If more than one web browser is saying it is not safe or cannot be verified, then its probably not.
Mind to reveal what you are trying to download? Help us to better understand the problem.
You can try to temporarily disable your Antivirus and Windows Firewall and try the download again. (Do this at your own risk).
Maybe you are looking for
-
Of Satellite A200 DVD burner does not work
The engraver of DVD of my Satellite A200-130 is not written at all. He reads everything and plays videos but it will not write anything even if the program, nero works and displays a message saying "burn successfully the process" in particular, but w
-
Bluetooth and Satellite A100-580 (PSAARE-03101TFR)
I bought my Satellite a couple of weeks, and I can't use the bluetooth connection. All drivers and programs are installed, but nothing semms to work. Oddly enough, there is also nothing talk bluetooth in the control panel. Is this normal?I'd apprecia
-
Original title: My HP Officejet 4300 Series printer not print The mistake of the printer says "no connection to the computer. The computer error says: "the printer is offline. All necessary cables are connected. What should I do?
-
My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken. This seems to be the only program with problems. All the answers?
-
I have an application that I want to add a background process that needs to execute a task once per day. I studied with the help of another point of entry with a RealtimeClockListener and also just begin a TimerTask with a schedule fixed. Any advice?