I am trying to open a session in photoshop blend on iPad pro, but he said try later

Similar Questions

• When you try to connect to my email it says he was the block because someone tried to open a session with too many bad passwords.

  Blocked e-mail?

  I have not tried to connect to my email for a week, but when I tried to log on it (I only tried once), it tells me that my email is blocked because someone tried to open a session with too to bad passwords. What is someone trying to hack into my email?

  Hello handset,

  What e-mail account are referring? If it's Hotmail or Live email, then click on the links below and re - ask your question. Thank you.

  Windows Live Mail

  Windows Live Hotmail

• I am trying to open a session in creative cloud, but it keeps disconnecting me and I don't know why?

  I am trying to open a session in creative cloud, but it keeps disconnecting me and I don't know why?

  Error: You are no longer connected to creative cloud applications

• Trying to open a corrupted catalog extracted from the software recovery but shows 0 bytes.

  Trying to open a corrupted catalog extracted from the software recovery but shows 0 bytes.

  Hi pibo1984,

  As the catalog size is 0 bytes, this means that the catalog has no inside information.

  So I suggest you to please try to work with one another your backup catalog.

  Kind regards

  Tanuj

• I just bought Photoshop CC, everything worked fine, but when I try to open it, it says "no found subscription, please contact customer support.

  I just bought Photoshop CC, everything worked fine, but when I try to open it, it says "no found subscription, please contact customer support.
  I tried to connect you again, it still works well, but when I try to open it, the message of stills the same.
  What should I do?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  (1) temporarily disable your security/antivirus software

  (2) download iTunes from the official source: http://www.apple.com/itunes/download/

  (3) try to reinstall

  (4) turn on your anti-virus

• I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the license recovery application, which I did, but then when I tried to run this app, it then came wi

  I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the recovery of license application, I did, but then when I tried to run this app, it then came with the recovery of the license was not based... How can I get my CS3 works again?  Thank you, Glenn

  Hello

  Please check the help below documents depending on your operating system:

  Error: "License has stopped working". Windows

  Error "Licensing has stopped working". Mac OS

  Hope that helps!

  Kind regards

  Sheena

• Yosemite OS, cs6 ext, that's what I get when trying to open, could not initialize Photoshop because the preferences file was invalid (it was deleted). Please help me

  Yesterday it was working fine, this morning, I tried to open cs6, and I get the above message. Tried to put the file in my laptop (copied to a USB key) and when I close all the windows files is not displayed again, and ps6 shows me this message above. I use a 27 "iMac computer. I've installed a plugin (WhiteWindowworkaround.plugin1_0_6.zip) to correct my problem of cursor. PLEASE HELP ME...

  The first thing I would try would be to manually reset preferences. If this fails, try to uninstall the plugin and see if the problem goes away.

  In case you don't know how to reset:

  Reset preferences

  (1) close the program, and then press Ctrl + Alt + Shift (Win) / command + Option + shift (Mac) (not reversible) starting

  or

  (2) move the folder. See:

  http://www.Bugge.com/family-and-friends/Illy/Illy.html

  -OB

• ProBook 455 G1: "Osoitin ei kelpaa" error ("invalid pointer") shown in trying to open a session

  Hello

  I'm computer fixing of my mother-in-law. The problem is the following: once installed it updates and phone rebooted it couldn't connect because the screen started to Flash (i.e. turning black and then show the new login screen). I start the computer in safe mode and loaded the last restore point. However, now I am unable to connect because once I selected (only one available) account in the login screen is shown a different login screen. "Another user" text ("Korean kayttaja" in Finnish) is on the logo and message 'check' password ("Tarkista salasana" in Finnish) under him. Below are the fields id and user password. ID field is prepopulated with his user name. After I typed his password a "invalid pointer" error ("Osoitin ei kelpaa" in Finnish) is shown.  Therefore, I can only connect in safe mode.

  I checked the most recent restore points and seems that there are a lot of updates until the original flashing problem has occurred. I tried to restore but restore points not chance.

  5.9.2015 09:36 «Microsoft Visual C++ 2012 11.0.51106 Redistributable (x 64)»

  5.9.2015 09:36 "Microsoft Visual C++ Redistributable (x 86) 11.0.51106 2012"

  5.9.2015 09:24 "HPSF app updated"

  5.9.2015 09:19 "HPSF app updated"

  5.9.2015 09:18 "HPSF app updated"

  4.9.2015 21:48 "HPSF app updated"

  Do you know how I can fix the problem so that it can connect normally? Ask if you need more information. I would appreciate if someone could help it!

  I found this solution while Googling autour:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-7-logon-issue-with-message-invalid-pointer/7ff7277f-D940-4761-9268-3115c424159c

  ' 1) safe boot mode.

  (2) run MSConfig

  (3) select the Diagnostic startup option on the general tab

  restarting...

  you will get a "generic" windows login screen and be able to get your desktop... but almost all the services will be disabled and stopped, so will not work

  (4) open Services.msc, find and double-click the Windows Installer, manual exchange service and run...

  (this will allow you to uninstall programs)

  (5) Control Panel, programs and features

  (6) uninstall the HP software: file sanitizer, drive encryption, Manager access of devices and finally Client Security Manager (it is the security that must be uninstalled, but others must be removed first) - I chose the option "do not save stored configurations" (because I believe this is what is actually prescription foo ("pointers" between user names) passwords and settings stored fingerprints database)).

  (7) MSConfig again, change the Normal start".

  (EDITED ON10.9.2015. Thanks rcoffey69 for the tip!)

  If you cannot remove the Manager of HP devices access to step 6:

  7) go to control panel > remove programs and instead of delete access Device Manager, choose 'repair '.

  (8) restart and go into safe mode.

  (9) run MSConfig and change Normal startup, restart.

  (10) connection to normal mode and now you should be able to remove the HP device access Manager, restart.

  (11) remove Client Security Manager, choose 'do not save stored configurations', restart.

  Now everything should work ok again.  Don't panic if you see errors when trying to log on after step 10. You should still be able to connect. In fact, you might be able to uninstall HP device manager access (+ Manager client security) right after step 7 without the need to reboot in normal mode (?) I did not try it.

  -------------------------------------------------------------------------------------------------------------------------------

  (Former message):

  However, I can not remove the HP device access Manager because it displays an error message (translated version): "1720 error: there is a problem with the Windows Installer package." A script required for installation to complete could not be run. Contact your provider to support personal or package. Custom action script-2147023838 error UninstallDriverFromINF. Line 10. Column 2.

  This is why I can't delete the client security manager that is probably causing this problem.  I tried to remove it by using Windows Installer CleanUp Utility, but it did not help. Anyone know how to get rid of HP Device Access Manager so that I can remove HP Client Manager Security? )

• Computer shuts off and comes back over and over again trying to open a session

  Original title: when I turn on the computer and the connection, it will compromise the destop and then shuts off and comes back, over and over again. I have run and remove detections from virus and bug, but it still does not work. Help
  Can I delete something so that my computer turned on? After f8 button the window xp from microsoft to address blue lights with a list of things to do in which nothing has allowed so far.

  Hi bonnieb1941,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. How have you tried to run the virus and bug checks?

  4. is this the machine is disconnected and re-login in back or just reboot?

  Step 1:

  If the machine is in continuous loop, then try to disable the auto restart in case of system error and let us know the error code.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select disables automatic system failure reboot when the Windows Advanced Options menu is displayed and press ENTER.

  Check the link for more information:

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2:

  Also, try unplugging the external devices connected to the system and check if the system boots normally.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Web pages are not accessible using desktop remote after trying to open a session.

  
  Hi Experts ADF,

  JDeveloper 11.1.1.7.0

  We have designed an ADF Application using SQL authentication. The first page of connection is visible in all remote computers. After you enter the correct credentials and clicking on the "connect" button.

  I get the message to all the remote computers, below, and I'm not redirect to homepage. However, in all the remote computers connection validations working properly.

  We are using IE 9.

  

  We tried to delete cookies and erased from history, but still the same problem persists. No newspaper is also available.

  But I get redirected to the correct home page on the computer where the application is deployed. Please suggest what could be the root cause.

  Thank you

  Roy

  Hi Roy,

  Please check your path from the home page. There is any folder or not?

  If it is inside the folder you must give the path faces/folder_name/welcome.jspx.

  With folder name also will work in the same machine. Incase of remote machine it will not work...

  Thank you

  Fouzia

• Tried to open a session has message USER PROFILE SERVICE failed to open a session, the user profile loaded Onlyon

  Computer was working fine last night. AFTE rtalking on Skype, stop computer and now today this message keeps coming up when you try to connect to computer

  Computer was working fine last night. AFTE rtalking on Skype, stop computer and now today this message keeps coming up when you try to connect to computer

  Go to Safe Mode
  http://www.Vistax64.com/tutorials/123496-safe-mode.html

  If you can log in to your account administrator in safe mode...
  Do a system restore. Choose a date where you did not have this problem as your restore point.

  If you are unable to log in to your account administrator in safe mode...

  You see another tool counts next to yours? Yes, if your built-in Administrator account > by default, there no password > login and do a system restore > choose a date where you did not have this problem as your restore point.

  If you can't do or of what above, see if this tutorial will help:

  http://support.Microsoft.com/kb/947215

  or this tutorial

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• new printer 8500, tried to open a session in eprint, said code has expired a new impression. It print give me cod

  Could not believe that a new printer had expired code.  Info on printer gives me the same code every time. Any suggestions

  Hi tgar847,

  Whenever the ePrint information page prints with the code, it is activated for 24 hours. After that 24-hour code expires, it print again activates the same code for 24 hours.

• 28.0 Firefox does not save my tabs open between sessions - Mac OS x on MacBook Pro

  (I was intending to respond to another thread on this topic but Mozilla Support requires you to start a new thread to be able to register)

  Firefox starts: show my windows and tabs from last time.

  No setting change - either in the preferences or all: config - changes the behavior of Firefox to restore the tabs at previous sessions.

  Options I've seen suggested:

  • Create a new profile to test
  • To uninstall and reinstall Firefox
  • Delete the files in your profile sessionstore (?) folder

  Yes.

  I have reset default Firefox and which seems to have authorized.

• Opening of session in normal mode does not work, but will be safely mode__

  I can log into safe mode, but when I try to log in normal mode I get a message that says that the connection has failed and my stuff cannot be loaded correctly. I'm sure it's a software problem, but I don't know how to correct it. I'm working on a Windows vista computer.

  What is your problem error message?

  We need EXACT messages here.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner