I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

Similar Questions

• After a custom Windows 7 installed on a Toshiba Satellite P105-S6084, my audio device does not start. Error code: this device cannot start. (Code 10)

  I got driver Conexant speakers on my laptop. I tried to find a device driver updates, but have had no luck. After being in Control Panel, hardware and audio, Device Manager, sound, video and game controllers, under that is high definition Audio Device with a yellow triangle and!.

  After a right click and update driver, it says that the driver is up-to-date. In addition, the error code says this device cannot start (Code 10)

  In addition, this seems to be a driver of Microsoft when the original driver was Toshiba/Conexant. I looked on the support Web site of Toshiba for a driver updated for my laptop and Windows 7.

  Any suggestions?

  Umesh P,.

  Thank you for answering my question. I don't know that this forum allows you to stay busy. Thank you for taking the time to answer my question.

  To sum up, I checked the Windows Audio and Windows Audio EndPoint Builder according to your instructions. Both were running as usual and start automatically, so it wasn't the issue.

  I then visited Fix It. On the web page, since I am under Windows 7, the instructions on the provided web page to access the control panel and through system and security, to try to resolve the problem to fix common computer problems.

  This process led me through the same re-setup of the device through Windows 7 driver that failed previously. Also because it has detected Windows 7, the web page would allow me to run the Fix It program.

  When I visited the Support from Toshiba web page you provided, I was unable to find a sound driver for Windows 7. After filtering through my computer on their web page, the nearest driver was for Vista.

  Take a chance, I downloaded it anyway. What has been the worst that could happen? It does not work? Well, I was there already. In any case, the installation worked and I now the audio again.

  Moreover, this is the link for the driver, for anything that might be in a similar situation I've been:

  driver_audio_conexant_25636A.exe

  -or-

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/driver_audio_conexant_25636A.exe

  Also, Conexant offers no direct audio driver support and ask you to check with the manufacturer, which in my case is Toshiba. Toshiba not currently has an audio driver Windows 7 for my particular Satellite phone. Since this is an older, they can't come out with an updated driver.

  But, since the audio driver Vista download works, it is now a non-issue.

  Thank you!

  Jay

• Windows software update 7.0.6000.381 failed error code 8024D00F

  where can I find this download yet once (it is not in my hidden updates) so I can try to download and install this update inportant please

  Hi WeeBeeFree,

  Please use the Community Forums for Vista.

  We have an updated version 7.2.6001.788 agent update of Windows software, you can try to install to solve the problem. Be sure to disable your antivirus software before you install the update.

  Ref: how to get the latest version of the Windows Update Agent to help manage updates on a computer http://support.Microsoft.com/kb/949104

  To install the latest version of the Windows Update Agent, we recommend that you visit the following Microsoft Web site: http://www.update.microsoft.com when you visit this Web site, the latest version of the Windows Update Agent is automatically installed.

  In addition, the Windows Update Agent 7.2.6001.788 version is available on the Microsoft Download Center.

  Windows Vista, Windows Server 2008, Windows XP, Windows Server 2003 and Windows 2000 Service Pack 4

  The following files are available for download from the Microsoft Download Center:
  For a computer x 86

  Download the windowsupdateagent30 - x 86 .exe package now.
  For a computer x 64
  Download the windowsupdateagent30 - x 64 .exe package now.
  For an Itanium computer
  Download the windowsupdateagent30 - ia64.exe now.
  Release date: Thursday, October 30, 2008

  Please let us know if this was helpful.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you use Windows Media Center on the Xbox 360 DVD have not given chapter.

  After finally finding many questions I have my Xbox Media Extender and running upward and only this question left.

  I'm ripping my DVD to single file .vob she seems to like and plays very well, but it is only with the file movie and nothing else in the record.  How the XBOX sees it, the bed and he plays very well.  However I have no control outside the break and if I restart it takes over the job.

  Now if I rip my DVD with the .bup .ifo files in this folder the XBOX instantly he shoots in the list of the DVD and it will not play.

  When I use Windows Media Center on my PC it preforms even when the film is in the folder.  Then when I add bup and ifo data I can still play, but he has all data in the chapter that I need.  Shows all the chapters, allows me to jump as I please.

  How can I get my XBOX to behave like my PC?  I have to remove these 4 files in/out of the folder to see pop in and out of my list of XBOX.  How can I get the XBOX to validate data, so my movies actually have chapters and ignore the controls?

  Thank you

  Chris

  Hello, wilsman00

  As mentioned, by changing the VOB files, the data in the chapter are probably damaged. This can be confirmed by putting in a retail DVD in the drive and play directly from the DVD.

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it?

  During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it? Edit

  These windows display ads? They could be 'pop-under' designed to show when you are finished with your main window. Orbitz has these, for example. Irritating. I'm not sure of the best solution, i.e., advertising blocker blocker vs.

  If they are not ads, can you think anyway that they are related to the sites you visit?

  In addition, to close a tab (or window, if there is only one tab), you can press Ctrl + w. could speed up the process of their release until you find a real solution.

• I receive I/O-ERROR in bridge CC when I try to access the outputmodule. I have instaled the wersion more recent module, but it does not solve the problem. What should do?

  I receive I/O-ERROR in bridge CC when I try to access the outputmodule. I have instaled the wersion more recent module, but it does not solve the problem. What should do?

  reset your preferences: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

  I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

  alias-research-http://www.Amazon.com/s?ie=UTF8&x=0&ref_=nb_sb_ss_i_8_11&y=0&field-keywords=IPhO does % 20headphone % 20adapter & url = % 3Daps & sprefix = 20head % iphone

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• Automatic updates tells me that I need to install Service Pack 2 Windows XP, but when I try I always get error Code 0 x 80070005. I can't find the listed error code any where. What is going on?

  Please tell me what error Code 0 x 80070005.  I can't find it can.

  The 80070005 error is "Access denied" - and often refers to activation and validation problems.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• cannot access the rows of a table not nested element

  What Miss me? I'm under Oracle 12 c (12.1.0.1.0)

  CREATE TYPE dim_O AS OBJECT )

  dimension_id number

  label_en varchar2()300( )

  );

  CREATE TYPE dim_T AS TABLE OF dim_O;

  DECLARE

  dims_t dim_T

  START

  SELECT CAST(MULTISET( )) 

  SELECT  DIMENSION_ID LABEL_EN

  DE    DIMENSIONTABLE -actual physical table in oracle

  OÙ   DIMENSION_ID IN (3001 3002 3003()

  ) AS dim_T) "dim_rec"

  BY dims_t

  DE    DOUBLE;

  FOR I IN dims_t. FIRST... dims_t. LAST LOOP

  DBMS_OUTPUT. Put_line() dims_t() I). dimension_id);

  END LOOP;

  -exit from the loop above is

  -3001

  -3002

  -3003

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE ( SELECT dimension_id FROM TABLE (dims_t) ( )

  Dimension_id SET = WHERE = dimension_id 3004 3003

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE ( SELECT dimension_id FROM TABLE (CAST (dims_t in dim_T () ) ( )

  Dimension_id SET = WHERE = dimension_id 3004 3003

  
  

  END;

  I'm trying to understand this example very simple, but to no avail.

  Can someone tell me why I get this error?

  Thank you all in advance for your time.

  Marc

  What Miss me? I'm under Oracle 12 c (12.1.0.1.0)

  CREATE TYPE dim_O () AS OBJECT

  number of dimension_id

  label_en varchar2 (300)

  );

  CREATE TYPE dim_T AS TABLE OF dim_O;

  DECLARE

  dims_t dim_T;

  BEGIN

  SELECT CAST (TYPE MULTISET)

  SELECT DIMENSION_ID, LABEL_EN

  OF DIMENSIONTABLE -actual physical table in oracle

  WHERE DIMENSION_ID IN (3001,3002,3003)

  () AS dim_T) 'dim_rec '.

  IN dims_t

  FROM DUAL;

  I'm IN dims_t.FIRST... dims_t.Last LOOP

  DBMS_OUTPUT. Put_line(dims_t (i) .dimension_id);

  END LOOP;

  -exit from the loop above is

  -3001

  -3002

  -3003

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE (SELECT dimension_id FROM TABLE (dims_t))

  SET dimension_id = dimension_id = 3003 3004 WHERE;

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE (SELECT dimension_id FROM TABLE (CAST (dims_t as dim_T)))

  SET dimension_id = dimension_id = 3003 3004 WHERE;

  END;

  I'm trying to understand this example very simple, but to no avail.

  Can someone tell me why I get this error?

  You get it because dims_t is an array of OBJECTS - not a table of scalars. But your SELECT statement returns scalar.

  There IS NO such object, named "dimension_id"; It is an ATTRIBUTE of the object DIM_O. DIMENSION_ID is a SCALAR which, as says the exception, is a "No nested table element; If you cannot select/Update lines of it.

  What you do is equivalent to the following:

  DECLARE

  dims_t dim_T;

  number of dim_id;

  dim_o design;

  BEGIN

  Design: = dim_o (3, 'ghi');

  SELECT DIM_O (DIM_ID, LABEL) BULK COLLECT INTO table DIMS_T (d_o);

  end;

  /

  ORA-06550: line 7, column 59:

  PL/SQL: ORA-22905: cannot access the rows of a table not nested element

  ORA-06550: line 7, column 1:

  PL/SQL: SQL statement ignored

  This SELECTION is trying to design it as a table when it's a SCALAR - so the same exception you get.