I bought a digital keychain

Similar Questions

• I can't load images to my Viewer digital keychain?

  Digital Photo Viewer is not compatible with Windows 7; is it possible to make it compatible.  The program only works partially and does not allow the photos to be transferred to the keycahain Viewer.  I reinstalled the program, tried to run the program in a different operating system, but nothing works.

  Digital Photo Viewer is not compatible with Windows 7; is it possible to make it compatible.  The program only works partially and does not allow the photos to be transferred to the keycahain Viewer.  I reinstalled the program, tried to run the program in a different operating system, but nothing works.

  =========================================
  If you connect the viewer of digital photos on your PC via a USB cable...

  Switch on the digital photo viewer...

  Reach... Start / computer / devices with removable storage...
  Digital Photo Viewer is recognized by a drive letter?

• Download lightroom 6 on two computers? I recently bought a digital code for Lightroom 6 and it is already downloaded in my main computer but I also want to install in my laptop. How?

  Is it possible to use a numeric code bought for Lightroom 6 for two computers? I want to download on my laptop too so I can edit images while I travel. How can I do?

  Yes. You are allowed to two active installations. just install on the second computer and sign in.

  You can even have installed on more than 2 computers, but only 2 can be signed in and active.

• MINI DV-D016H car Keychain camera usb not recognized because it has detected a malfunction

  I bought this camera Keychain car MINI DV-D016H. When I connect it to the laptop which uses Windows 7 home premium, it says the USB device does not recognize by windows because it has detected a malfunction. What can I do? What can I do to continue using this device with the laptop?

  Hello

  -You are aware of any changes made on the computer before this problem?
  -Have you tried it on another computer?
  -How are you trying to connect the device to the computer?
   
  Method 1: Run the Microsoft FIXIT from the link below, and if that helps.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 2: Run the troubleshooting utility from the link below and check if the problem persists.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Hope this information helps.

• What version of windows do I need to connect to a camera digital dual-mode?

  currently I have windows 7 Home Edition premium; I recently bought a digital camera for my daughter and am unable to display or edit his photos as when I connect with the USB cable, the device is not recognized. When I studied the USB it says that this dual-mode camera is not compatible with this version of windows.

  Tuesday, February 26, 2013 19:13:53 + 0000, evecarpenter wrote:

  currently I have windows 7 Home Edition premium; I recently bought a digital camera for my daughter and am unable to display or edit his photos as when I connect with the USB cable, the device is not recognized. When I studied the USB it says that this dual-mode camera is not compatible with this version of windows.

  Buy a USB drive for the type of card (SD?) his camera uses. They are
  very inexpensive - 2 $US or Amazon.com.

  Personally, I think that using such a reader is a better choice than
  connection to a camera. It is easier, and it does not use the camera
  battery. Although I peut plug in my camera, I never do. I own two
  These readers - one that I keep on my desk and the other that I take
  with me when traveling.

• photo frames mini won't autostart

  I bought 4 Kaiserbass mini brand photo digital keychain to give parents like presents and I intend to put my own pictures on the photo frames before you give them as gifts. I connected one of them, who, after having followed the instructions, has connected to the computer and automatically the preinstalled software, introduced a window that allows you to download pictures on the key ring. Once I put the photos I want on the picture frame, I disconnected via the icon "Remove hardware" in the toolbar. I have connected the next photo frame, followed the instructions, but it is not pointing upwards and do not auto starts with the software preinstalled in the photoframe.

  I remember something similar happening once at work, where my usb storage device I had used several times in this computer, would suddenly does not start. A colleague said that it was not recognizing the number/name of the device, and he entered a part of the computer and changed the name of the device so that it would recognize my device again. I don't remember where to go or what to do.

  There, no one knows how to do this, or someone has advice on how I can connect several of the same item and have always them each individually recognized by the computer. I am running XP with service pack 3 installed. Hope that I have listed this investigation under the correct headings

  Thank you

  Aussiegirl1961

  Ask your friend... rename the USB key must not be done often. Check with the manufacturer of the program.

• P20-552: 2 GB SD card does not work.

  I have a P20-552 (PSP26E-025E9-S4), which is about 18 months old. I recently bought a digital camera (IxUS 750) barrel with a 2 GB Sandisk Ultra II SD card and the combination does not work well. Although I can transfer images from the camera to my Toshiba laptop with a USB cable, sometimes, I would use the SD slot on the laptop, but there seems to be a problem: seconds after pressing home the SD card in the slot, I get the message "disk is not formatted - do you want to format it now?". I said OK but then I get the message "cannot be formatted disk in drive E".

  The card continues to work perfectly fine in my camera and on my iPaq Pocket PC. In the Toshiba SD card works quite happy with Sandisk card of 256 MB SD, which is usually in my PDA.

  Anyone has an idea why the 2 GB card does not work in the Toshiba? It's updating a driver - I watch the other day but I couldn't find anything that seemed appropriate, but I might well have forgotten something...

  I'm running XP Home Edition (SP2) and are automatic updates IT. I have Norton Virus and Zone Alarm running and have no problems with other software/applications - at least, no problem, as someone suggested to suck my laptop overheating a few weeks ago ;-)

  Thank you, Brian.

  It seems that the unit doesn t support this card.
  See your user manual. You will find an information that this device supports only the following SD card formats: Mo 8/16/32/64/128/256 and 512

  According to this document, the 2 GB are high.

• How to see the recorded movies?

  Hello
  I bought a digital camera(DSC-HX1) a few days ago.
  How to watch recorded movies that save in the memory of the device on the PC by connecting to the USB port?
  I don't want to use PMB, because he needs cable to connect to the PC each time.
  I try with WMP, GOM player, KMplayer, K - Lite Codec, Quick Time Player, Divx Player, but none of them have problem with recorded movies, like that voice now on & off or photo I jump situation or stop and go.

  Thank you for your help,
  Afshin

  Hello Afshin,
  If you have already saved files on your computer and do not want to use PMB, windows movie maker or another such program could be used, however the format file needs to be converted. If your files are still in the camera, then you must connect the camera to the computer regardless of the use of PMB or another program to see the files, once the files are transferred to the computer PMB does not require the camera or camcorder to be connected to the computer to watch the downloaded videos.

• Problem with the help of Dynadock with Internet Explorer

  I don't know if cela the right forum, but I have a problem I'm trying to understand. Here are the basics:

  Toshiba Satellite L750 laptop with Windows 7 64 bit OS
  Dynadock U with software version 2.4.0.13 (for the monitor, printer, keyboard and mouse, Ethernet)
  Internet Explorer version 9.0.6

  Here's my problem:

  The installer works well for a few months. Last week, I bought a digital camcorder from Panasonic, and when I tried to watch the video on my laptop it is very jerky etc. I looked at the Panasonic troubleshooting guide and he was told to change my background theme of 'Aero' to one 'basic and high contrast themes' that I made and the video was perfect.

  When I got back to my office and hung the Dynadock everything worked fine except IE which essentially froze and I couldn't close, so I had to restart. Google Chrome worked fine however. When I'm past my background back to IE "Aero" started to work again.

  I don't want to switch to Google Chrome, that many of the tools that I use for my work only work with IE.
  I don't want to change the settings back when I use my video camera.
  Any ideas on why this is happening and if something can be done?

  Thanks for your help!

  Dennis

  Hello

  I think I found something interesting for you:
  + Disabled on any platform Aero themes Windows 7 causes a delay when you use Windows Photo to display on an external monitor connected to a Toshiba dynadock +.
  http://APS2.toshiba-tro.de/KB0/OPT17036Q0000R01.htm

  It looks like the update to at least displaylink driver V5.6.x would help solve this problem.

  Feedback would be appreciated.

• Any possibility of upgrade Satellite M40 to read 2GB xD memory card?

  Hello

  According to the user manual, the M40 can only read cards up to 512 MB xD. Now, I bought a digital camera Olympus, including a 2 GB xD card. Is it possible to upgrade the laptop to read this map or is it just not possible?

  Thanks for the reply.

  Jan

  Hi Jan

  I've never heard any successful solution and I'm really skeptical about it. Only thing I can imagine is update driver for SD card reader with more recent but similar model laptop driver, but please don't ask me which. :)

• How to send commands to my oscilloscope in NIMAX?

  Hi all

  I'm new to LabView and have bought a digital oscilloscope and a digital signal generator.

  I have the list of remote control for each of them.

  The oscilloscope is USB, and the signal generator has only a RS232 port.

  I am able to send commands to the oscilloscope via the EasyScope software supplied with the scope, such as * CAL?, which calibrates successfully my reach.

  However, I can't have my field meet NIMAX.   I am able to get the signal generator to work in NIMAX or EasyScope.

  Could someone tell me what should I do to activate my USB channel in NIMAX, as well as my channel RS232?

  It is rather curious that the scope correctly responds to * IDN?, but fails to react on * CAL.?

  CAL may require character of specific endpoint sokme?

  What happens if you do the CAL without IDN before when you have a new session? Perhaps, the scope crashes somehow with the IDN...

  Norbert

• Back-2090

  Hello

  I bought a digital oscilloscope based on PC (back-2090). And I work with labview software and I need to trigger the two channels simultaneously. But in the example labview, only two States 0 and 1 is for relaxation.
  It is in the basic software trigger Mode is 0, 1, 2 and 3 which is State 2 alt Trigger please help me in this case

  Thanks for driving me.

  I need to trigger the two channels at the same time I want to find the phase of the signal of two

• Where is my serial number.

  I bought a digital download of Multisim and everything just, I can't find my serial number of the product completely install and activate the program.

  -Thank you

  According to the OnTheHub site, your serial number should be posted in the reception of the order

  Click here to open a help document.

  Kind regards

• Anyone else get randomly disconnected backward compatibility games? I'm about to give up the program.

  Whenever I play a games backwards Compatibility (BC) 360 I randomly cut from Xbox Live, but only on the 360 end not the end of the Xbox One (XB1). Here are a few notes for intelligent types:

  -It is not isolated to a game because it happens to me on Left 4 Dead 2, Gears of War 2, Peggle, COD: Black Ops, AND MORE.

  -Coming when I broadcast, coming when I broadcast. (I like to broadcast and this hinders my ability to do)
  -Not my connection because I'm staying on XBL on the dashboard XB1.  In addition, my other devices are connected.
  -Only occur on XB1 games... ever
  -Sometimes when I'm in a group of XB1 and 360.  Occurs when I'm not in a party.

  -My download is between 50-100 Mbps, Upload is between 15-30mbps

  -I'm on a wireless signal, reception of 100%.  Move to a wired connection soon to try this (doubtful).

  -J' forwarded the ports required for XBL according to Support.

  -J' went down the firewall on my router.

  -J' deleted games and reinstalled them.

  -J' deleted my profile player and re-uploaded on XB1 and 360.

  -My NAT type is OPEN.

  -No matter if its on disk or not. I actually bought L4D2 digitally even if I have the drive to try to alleviate the problem

  I'm not there are more things I forgot.  As you can see I have tried almost everything and got no results.  I contacted the support like 5 times and that is why the list is so complete.  It's incredibly frustrating when even people to Xbox support can help me then I'm going to try this as a last ditch.  I'm about to give up compatibility backwards and I have a large catalog of games that I NEVER threw.  Been a member XBL for 11 years in very good condition.

  I hope you guys and girls can help or at least it attracts the attention of young people the tech guys to Xbox.

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

• Announcement
  PLEASE READ. Introducing changes of case review & forum

Technical support of Xbox Live rewards
Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

• Xbox Live rewards program announcements

• Xbox Live rewards Questions

See you soon.

• BenQ MS612ST projector

  Someone help me.

  I just bought BENQ digital projector - MS612ST, data of manufacture: April 2011.

  My question is: does this project support WIndows XP (all sp)?

  DOE, it also supports the tv connection?

  I hope to hear from you as soon as possible.

  Kind regards

  Edward

  Hello

  We found no w.r.t. compatibility Windows XP on the link Original equipment manufacturer.

  For your reference: http://www.benq.us/product/projector/ms612st/specifications

  http://support.Microsoft.com/kb/314062

  I suggest you to check in the manual or contact the hardware manufacturer.