T41 2373-A10 - problem with the "PCI Modem"

Similar Questions

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problems with the new modem DSL and Linksys BEFSR41

  My Speedstream modem died and I had to buy a new modem.  At this time of year, it is difficult to find exactly what I wanted and I ended up buying a D-Link DSL - 2320-B.  I got the Linksys BEFSR41 (old version 1, I think) for years and it has always worked well.  I have problems to get an internet connection through the router.  With the modem connected directly to the network card, as now I have no connectivity problem.  I had to change the IP address on the Linksys BEFSR41 192.168.2.1, as the modem is 192.168.1.1, 192.168.0.1 as the old Speedstream.  I couldn't see a way to change the IP Address of the new D-Link.  I have my ICS TCP/IP set to auto obtain IP and DNS.  I was previously created for a fixed IP of * provided by the router.  Even with the setting on the router to "Obtain an IP address automatically", I can't to the internet with the router in the middle.

  Any help will be appreciated.

  Your modem is a combination of the modem and the router. The problem occurs when you try to connect another router behind this configuration and end up having 2 servers dhcp and nat 2 (for port forwarding and other issues, creating in some cases where even branded products use ip addresses will clash and devices will not connect at all when him are interconnected).

  To avoid the situation described above, it is recommended that you enable the full Bridge mode on the modem / router that you currently connected to the internet and let your new wireless router controls all the functions within your local network and the internet connection (you must enter all the details in the new router, including Internet service provider username and password).

• E7440 - problem with the PCI standard PCI to PCI bridge device

  I'm having a problem that I've not seen before on the E7440. I am Windows 7 x 64 deployment and after the imaging system, I have a machine called a bridge of PCI to PCI standard PCI with a yellow exclamation point.

  Indicates the status of the device that "this device cannot find enough free resources that it can use." (Code 12). If you want to use this device, you will need to disable one of the other devices on this system. »

  The unit uses a standard driver from Microsoft and the HardwareID is PCI\VEN_1AE9 & DEV_0201 & CC_0604. I was not able to find an any other driver or even a seller that corresponds to the string of VEN_1AE9.

  

  Curiously, if I delete the device does not. I also installed the Dell management software and was download and install all updates and that didn't make a difference.

  Anyone else seen this problem?

  I wanted to just let know you that I discovered the solution.

  The drivers are provided by the Network_Application_V6DXH_WN_1.5.16.881_A06. EXE package otherwise known as Application when Dell Wireless 1601

  I expanded the content and packages the installation to drivers that we do not use the D5000 when a docking station.

  This is my channel of the installation: MUPSetup.exe - q d-l %windir%\Installer\Wilocity_WiGig_D5000_Drivers.log

  This supports the PCI Bridge card and rename it to some other features. I've included a screenshot of the legends of the device once the drivers are installed properly.

  

• Problems with the modem Toshiba G450

  Hello

  We faced a problem. We have installed a software and drivers of Toshiba g450 on different laptops to use it as a modem for a mobile phone network. When we have logged in as administrators all fine, when we have logged on as a normal user in the field, the software will search the modem without success. We do not have such a problem with other USB modems.

  Thank you

  André

  Sorry Andrew, but this forum is explicitly designed to discuss with the portable mobile computer.
  G450 laptop, desktop, PDA, or cell phone is?

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• Connectivity problem - problem with the modem or the router of network

  I had a network with 2 computers.  The main computer was a Windows XP operating system and the secondary is a Windows Vista operating system.  There was a modem connection and the router. Due to a storm and a leak in my ceiling in my main computer got wet and I couldn't use it.  I have connected the modem without the router directly to the secondary computer, but it is not recognize the modem.  "Internet Explorer cannot display the webpage." So I ran the diagnostics and received a message that there could be a problem with the modem or the network router.  I did the thing 'ipconfig' and there is no gateway.  Is there anything I should do to make this secondary computer main computer?

  Hello

  If you use a router there is no primary and secondary, all the computers connected to the router are equal.

  Many Internet service providers allow you to control some form of autehtication (ID, PW) online journal.

  Your router and the computer humid probably were installed to authenticate.

  If the router does not use it.

  Otherwise, contact your ISP and ask for the help of authentication.

  Jack MVP-networking. EZLAN.NET

• Problem with the driver... Realtek PCIe Fe Family Controller

  I have a Toshiba Satellite L505D-S5983 and I have a problem with the driver for Realtek PCIe Fe Family Controller. What should I do? Thanks for your help.

  The program Driver Genius Professional are "junk" and must be avoided in most of the costs!   They will cause more problems than they find only the first available driver.  Most computer manufacturer can usually have 'rights' to customize pilots 'reference' for their offers of specific material.

  If your Toshiba has been sold with Windows 7 "pre-installed" then Toshiba is "obliged" to ensure the correct drivers.  You should check with the website of Toshiba and the hardware specifications of your model.  Then you should be able to download the necessary drivers directly from Toshiba.

• There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled error code 39.

  HP Pavilion 17 laptop

  There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled.

  OT: Driver help

  Name:	PCIe Ralink Bluetooth adapter

  Error code:	39

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  What is the number of full model of the laptop?

  39 error code means Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. To resolve the problem, you will need to uninstall and reinstall the drivers for Ralink Bluetooth PCIe card on the manufacturer's Web site.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• T41 2373-A10 cannot find wireless driver

  Hi, have tried all the drivers on the support page for my laptop T41 2373 - A10 and I can not do the work wireless. Don't know what card is inside, so I tried to install all the drivers.

  Working on a new copy of windows XP SP3

  Any help would be great!

  Finally work!

  Found the driver here http://devid.info/36611

  in case anyone else has this problem too!

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Time Capsule no longer works in conjunction with the ISP modem

  Hi everyone, thanks in advance for any help you can provide, and my apologies if similar topics have already answered - rushed for this post, so I did not have too much time to browse the forums - please point me in the right direction if other threads exist!

  I'm in the United Kingdom and Virgin like my ISP... I had my Time Capsule for almost a year now and if it had connected to the Virgin Super Hub (dial-up Modem mode), without any problems. A few weeks back, I started to notice the drops intermittent in the Internet, until it finally went down all together without apparent reason. Now I can no longer use the Network Time Capsule using a Macbook, laptop computer Windows, Smartphone, Tablet, or Console games (I can always connect to the network, but there is 'no internet'). After talking at length with Virgin they basically blame the Time Capsule and say they cannot help me because it is not their technology. Since cutting the Capsule and turning back on the Super hub wireless, everything works again. I tried the simple things like rebooting, check connections etc., but to no avail.

  I have a lot of backups on the time Capsule (I use it for work purposes), so I'm afraid to play with things too in case they are deleted, but now desperately need to get operational new... Should I look for to reset the Capsule of time and/or remove/reset the wireless network I created when the first set up (if everything resets is possible without deleting the stored files)? Any help or advice would be much appreciated... Sorry for the long post!

  Thank you guys so much!

  The first part is to ease your mind... the TC is perfectly ok with reset... nothing can be deleted by using the reset button or reset everything in airport utility... the only way to erase the hard drive is to clear its contents through the disk tab in the airport utility.

  We noticed a lot of problems with the WAN port on the TC... And a bunch of modems... This can happen a day or day 366... but once it starts, it doesn't go away.

  Connect the TC in the Virgin hub working in router mode full... you're going to fill the TC.

  1 factory reset the TC.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  2. make a new configuration of your Mac or iOS devices.

  With the wan of the TC plugged into the hub of Virgin by ethernet it should choose default wire bridge... If this isn't the case, manually change the configuration.

  3. once it is bridged leave the connection of the Virgin hub since the LAN of the TC port WAN... and see how it goes...

  If it works ok for the backup then continue to use it... If it's still questions... Please post screenshots... or consider to resume to apple... in the United Kingdom, you should have a legal guarantee of a couple of years... much longer warranty Apple offer directly.

• Problems with the network controller

  Hi, I have a problem with the driver for network controller. I mean my wireless does not work... it connects to the router, but it still has this yellow warning and will not connect to internet. I tried everything and it doesn't work. I have not found a pilot wireless on the hp site. I have a HP laptop model 15-r020sq.

  Hi, I used the driver that you post. Now I have the same problems as before. I went over the details of the driver it's what he know upstairs: PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

• Problems with the software of fax on 1536dnf

  Hi, I just got a 1536dnf all-in-one, and I have a problem with the software sending faxes. I can fax machine directly, but when I try to send a fax from my computer, I can't even get into the software. I get an "internal error" that there is no device detected. I installed it on my network, so about four different computers can access. I'm running Windows XP SP3 and any other function works fine (I can print to the printer from each computer, send and receive faxes from the printer itself, etc.).  Any ideas why this happens? I found zero documentation or help on this and any help would be appreciated.

  Thank you.   I was using FAX4Word plugin for Word.  It allows to easily print/fusion of fax machines.

  I answered my own question, but others may be interested in:

  I was buy HP printers since the time that first, they came out with the LASERJet House, I waited in line to get one at the then price of $700 or more.  I bought a HP product on average every 3 years after that.   All HP products were excellent quality and easy to use.

  Once I looked at the question of the use of the 1536dnf as a modem, I found that I was MUCH better off just buying a modem from "Zoom" $ 50 for my database driven fax needs rather than trying to send it through the HP.  If it is possible to use the 1536dnf as an intuitely MODEM, it is a solution too complex to simply get a modem to 'Zoom in' $50, which leaves my 1536dnf available for other tasks.

• Problem with the number of lines in the channel

  Dear community LabView,

  I'm relatively new to labview and I came across a problem that (I assume) can easily be resolved with your help.

  I need to create a digital signal to trigger a camera, but I have a problem with the configuration of my lines or exit lanes. I would not use that line output to trigger the camera. (I use a card NI PCIe-6353). LabVIEW is telling me that the number of lines in the channel does not have the number of rows of data:

  Possible reasons:

  Specified read or write operation failed because the number of rows in the data of a string is not the lines in the channel.

  If you use the digital waveform data type, make sure that the number of lines in the digital waveforms is the number of lines in the channel. If you are using Boolean data, make sure that the dimension of the array for the rows of the data is the number of lines in the channel.

  Number of lines in the channel: 1
  Number of data lines: 2

  Task name: _unnamedTask<11>

  How and why the number of data rows is connected to the resolution of my analog digital converter?

  I would appreciate your help! Labview code and a screenshot attached.

  Thank you

  Beff

  I got it to work by changing the "data format" "binary not signed" OR by plugging is not the "offset" for the Square Wave VI.  I think that the default "offset binary" data format works correctly if there is a negative value.