I bought Norton virus 17 Jan 2012.Norton 360 v5 online. It is not loaded on my computer. Please respondMy anti virus is exhausted.

Similar Questions

• KB936330 custody relocation, uanable to install Norton 360, error that it is not compatible because service pack 1 has not been installed

  Original title: KB936330 custody relocation

  After starting without error black screen display problems indicating "start with vista or run diagnostics" etc. I did a full restore. A few problems with windows update which has finally been overcome themsevlves except 1. Service pack KB936330 continued to come as needing to be installed although the "installed updates watch it 8 times successfully installed.". When I try to reinstall Norton 360 I get error that it is not compatible because service pack 1 has not been installed. Run Microsoft Fixit and found the updates installed in different place and has been corrected, but problem persists.

  Hello

  1. you receive an error message?

  2 are you able to install other updates successfully?

  Check out the following link to check the status of the Service pack installed on your computer

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can follow the steps in the following article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Important: The article mentioned above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the following link:

  Back up the registry      

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  To install Norton 360, you can follow the process.

  Step 1:

  You can try to completely uninstall Norton 360.

  Check out the following link to uninstall the program.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2:

  Check the following link to install Norton 360 again.

  Install a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Post back with the results for you help more.

• ERROR: The action window says: "NO ACTION is AVAILABLE" while running Norton 360 'Difficulty now' utility in the Windows Vista-based computer.

  Original title: registry cleaning.

  Norton 360 has an Amber 'FIX NOW' on registry cleaning, but when he finished a result message appears "ERROR".

  The window for action says: "NO ACTION is AVAILABLE!"

  So what is the solution to this you problem.

  I also tried "RUN CHKDSK" for example. type cmd then ok followed by "chkdsk c: /f /r.

  Now I get ' ACCESS DENIED AS YOU DO NOT HAVE the PRIVILEGES SUFFICIENT. YOU HAVE TO INVOKE THIS UTILITY

  RUNNING IN ELEVATED MODE '?

  Hi BRIAN,.

  (a) I suggest to uninstall Norton temporarily using the removal tool.  You can download & run the Norton removal tool to remove Norton completely from your machine & see if the problem still occurs.

  Download and run the Norton removal tool to uninstall your Norton product

  (b) later, reinstall the Norton software.

  You can also contact Norton support to obtain assistance.

  Hope the helps of information.

  Please post back and we do know.

• I have Photoshop CS6 extended that I bought as a student in 2012. It comes with a disc for loading. I loaded it on two computers. One of my computers is gone belly up so I had to buy a new computer with Windows 10. How can I reload the program?

  I bought photoshop CS6 extended as a student in 2012. I loaded it on two computers. A computer went belly up last week and I bought a new computer with Windows 10 on it. How to load the program on my new computer. I have the DVD disc. How can I got to talk to someone at Adobe? Don't they have any live support?

  Hi wayneharder,

  Use of the download link for Photoshop CS6 Extended below.

  Download Adobe Creative Suite 6 applications

  Once the application is downloaded and ready to install it, need you the serial number to activate it.

  If you already have a copy of one of them, then it's fine, otherwise check out the link below to find your serial number registered.

  Find the serial number of your Adobe product quickly

  Kind regards

  Mohit

• Conflict of anti-virus (McAfee and Symantec - McAfee is not loaded on my computer)

  I have Windows Vista and in security under the Virus Protection Center, it shows that I have Symantec and McAfee that are in conflict.  But I can't find McAfee on my computer anywhere, remove it? Does anyone have an idea on how I can solve this problem is everything back to Symantec and McAfee in RID?

  Hello

  Run the McAfee removal tool

  McAfee removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  I hope this helps.

• I bought lightroom 6 and it will not load on my computer?

  I just purchased lightroom 6 and it will not load on my computer it's not 64-bit. I used a version track Lightroom 5.7 and it worked very well, then, what is the problem.

  Download, installation, setting up

  Lightroom 5 (Windows) ran on 32-bit operating systems.

  Lightroom 6 (Windows) requires 64-bit Windows.

  What version of Windows are you using?

  https://support.Microsoft.com/en-AU/KB/827218

• McAfee v Norton 360 - Netbook

  Norton 360 Netbook edition expired but had loaded BT NetProtect Plus (McAfee) prior free.  Now get frequently hang ups.  Manager tasks shows often clocked at 100% with McAfee access Scaning taking up nearly 50%.  I have to go back to Norton?

  You completely uninstall Norton before installing McAfee?

  Try to run Norton removal tool:

  https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?docid=kb20080710133834EN_EndUserProfile_en_us&lg=english&ct=united+states&product=home&version=1&pvid=f-home&layout=Retail&partner=&ispid=&sitename=&actstat=activated&substatus=current&ncoap=1

  If the problem is not resolved, then contact the vendor of anti-virus (McAfee) and ask for help.

• You can install Norton Ghost 15 backup with Norton 360, or it is not recommended?

  I installed Norton 360 on my Windows XP computer and I would like to know if I install Norton Ghost 15 if it would conflict with Norton 360 or both would be not compatible?

  I think they are compatible.  360's anti-virus; Ghost is the backup.  If you really want to know the official answer, I would contact Norton.

• Volsnap is read by norton 360 as a virus, how to fix

  Whenever I run Norton 360 it Volsnap pilot Microsoft Volume Shadow Copy is identified as a virus that can not remove Norton, however, Norton reverts not too sure. How can I solve this problem.

  Hello

  The Volsnap Volume Shadow Copy driver is the driver provided by Microsoft and is not a virus.

  I suggest that you contact the Norton Support for more information on why Volume Shadow Copy driver are detected as virus.

  Check out the link below to contact Norton Support

  http://us.Norton.com/support/DIY/index.jsp

  You can also post the question on the link for more support below

  http://community.Norton.com/T5/Norton-users-discussion-forum/CT-p/NIS

• Why am I always get error unspecified of C\Program Files(x86) \New folder \Engine\5.2.0.13\uistb.exe everytime I try syart upward from my Norton 360 anti virus

  whenever I try to use my Norton, 360, it does not work, I can't urn that the firewall on it isn't work fpr the reason why I said in my question. How can I solve this problem of an unspecified erro amd to get my Norton 360 tp work?

  Contact the Norton Support for assistance.

• My computer hangs on reboot after that I got Disabling UAC. Norton 360 5.0 indicates I have no virus.

  I am trying to disable User Account Control (UAC), but when I do my computer crashes when I restart. I have to restart in safe mode and turn on UAC to avoid the crash. I repeated this process a few times, so I don't know what the UAC which is responsible in some way.
  No one knows why this is happening or had a similar event? I have run Norton and malware programs and do not seem to have any bugs.
  I'd appreciate any comments at all. Thank you

  Hello

  User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users.

  We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  You can perform the clean boot and check for the issue:
  http://support.Microsoft.com/kb/929135
  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Norton 360 anti virus & internet secruity

  Norton 360 is not ready for 10 window are other similar products. How will Windows 10 addresses this issues?  Users can not go without protection until these products are ready for Windows 10.

  Norton 360 is not ready for 10 window are other similar products. How will Windows 10 addresses this issues?  Users can not go without protection until these products are ready for Windows 10.

  You should ask: how Norton treats this issue! Why not ask your question in a forum of Norton?

• Norton Identity Safe in Norton 360 Version 5 does not work in Firefox 8.0.

  Has been using Norton Internet Security 2012. Updated Norton 360 Version 5. Also updated Firefox to 8.0. Now the Norton Toolbar does not appear in Firefox, and the Norton Identity Safe is not accessible. Symantec asked me to run LiveUpdate, until all updates are applied; Yes, I did. The toolbar and Identity Safe are still not available in Firefox 8.0.

  See the original statement of the problem: I bought and installed Norton 360 v5 (2012) as a replacement for Norton Internet Security 2012. I'm NOT under NIS12 or NAV12. It took 4 tracks of LiveUpdate for N360 to fully update. Now it works!

• Access to licensed products (obtained previously by Norton 360) off after Vista updated 28/04/11

  Norton 360 expires after Vista updated 28/04/11 - now no security, etc., no access to Windows Update or downloader virus checker... or any software under license, for example. MS Office... Suppose that this was caused by one of the shipped Microsoft updates that day but can't really many on laptop except game provided (no need to license) do games.

  Anyone any ideas and guidelines to follow to allow to return to the previous one (pre 28/04/11) Vista service in this situation?

  See the (my) response in this thread as a reference message: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  Pay special attention to what follows in this post:

  
  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

• Where can I find norton 360 removal tool?

  Also, how can I repair the Windows Vista Ultimate x 64 operating system when it is already infected with a BUG, and you do not have the disc to reinstall the OS?  BTW, I bought the HP Pavilion dv9500 Notebook HP Home & Office 3 years ago, and I wish it would come with a disc of BONE for situations of this kind.  I know, they say that the customer can make a system backup/restore disc, but after spending $2,500 for the laptop, I thought that HP or Microsoft it would with other software pre-installed.  Really? Do it now, Mr. gates.  Anyway, I don't know exactly what is the corruption, whether a horse of Trojan, worm, spyware, or malware, but my system is infected with malice.  I suspect thye nuisance comes from Windows Update from Microsoft.  This is the second time in 2 months that I had difficulties to install automated updates, important Microsoft recommends so that your computer will not acquire a virus, spyware, worm, or malware.  It comes in the form of a Korean media player.  Unfortunately, once I was able to install a 'little' updates, I happened to see, for the 2nd time, a Korean Messenger Center & a Korean Media Player Center was installed back on my computer. Everyone knows that Windows Media Player 11 is infamous for having a bad reputation which is one of the most corrupt that has Vista, and I believe that when you install the Windows Media Player update, is when your PC is compromised.  As I said I don't know what it is.  As far as I know, it might even by Rogueware, but according to, just like Microsoft would have happened on a patch or an update to fix this annoying I wish.  Not to mention, I had to spend over $ $350 to repair my PC 1st go round.  After the GEEKS have finished all the 'IT' they do, it was $362,37 to be exact, and he was gone for 8 days.  Anyway, back to the WMP 11 problem, at the very least leave, consumers install WMP 12.  With the software/programs as usual for an OS that WMP is, you would think that it would be available on XP & Vista.  But hell no, WMP 12 is only compatible with Windows 7 at the moment.  I am absolutely stunned and really disgusted Microsoft allows my computer to install malware on its pilots through its own update system somehow.  I hope I'm wrong on this problem completely, but it's just the way it looks right now.   I really don't want to continue buying the PC/Microsoft, but after this test, I might go with the Apple Mac (k)!  But if I'm right, and that Microsoft is it negligently, then the Microsoft, which is FAXED to the TOP!  You should be ashamed to call you an engineer!  WOW, WHEW, ok, I feel better now that I have that came down my chest.  Sorry folfks, but return to be in this forum.  Can someone help me to foinSo where I can find the Symantec/Norton 360 removal tool?  I plan on installing Kaspersky Internet Security 2011, SpyBots and MalwareBytes for a bit of extra protection for the software and the spyware malware trasj!  Wow, really, I feel better!  BTW, if anyone knows some tricks or tips to help with the issue of the update of Windows, I would be very grateful!

  Hello

  Unfortunately for you, this is not Microsoft

  These are of Public, hosted by Microsoft froums

  Microsoft won't get your comments

  Here are the different ways to reinstall vista

  Microsoft does not record the OEM brand computers, HP, Acer, etc.

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  With the machinery HP normally pressing F11 at startup to start the recovery process to factory settings

  and here are all the Options of HP recovery including how to do the recovery disc, reinstall vista from the recovery Partition, etc.

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00809678&product=18703

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  For a free AV here 2

  Avast, free or paying for (free is very good too)

  http://www.avast.com/free-antivirus-download#TAB4

  and Microsoft has highlighted an AV free too

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=e1605e70-9649-4A87-8532-33d813687a7f

  Make sure you get the 64 bit version

  and you can use the free version of Malwarebytes in conjunction with one of them without any conflict

  http://www.Malwarebytes.org/MBAM.php