I came across a scam through cleaning of PC products.

Similar Questions

• While moving recently, I came across my old digital camcorder Sony TRV620E and strips. I thought it would be a good opportunity to transfer the contents of the tape on my Mac I-... It is not as simple as it may seem however. I have Mac will not Recon

  While moving recently, I came across my old digital camcorder Sony TRV620E and strips. I thought it would be a good opportunity to transfer the contents of the tape on my Mac I-... It is not as simple as it may seem however. The Mac I will not recognize the camera, which I have connected via an out DV link and a usb connection.

  I also downloaded software HomeMemories of Sony, which seems to be as good as a chocolate teapot. In any case, I could not download the content, so I've been in conversation with Sony about it. Bit of a waste of time really, after about 3 months of back and forth emails they say that:

  1. 1. digital Camcorder (DCR-TRV620E) is not compatible with OS El Capitan.
  1. 2 PlayMemories House 3.1.00 or later version is compatible with OS El Capitan.

  However, performance is not guaranteed for all computers.

  As a result, please try another PC with a different OS.

  I don't have access to another PC, only I have a Macbook Pro with exactly the same software as my Mac. They run El Kapitan 10.11.5 and I - Movie10.1.2, HomeMemories 3.1.00.12180 and I also have an old copy of the Toast Titanium 11.

  Is it likely that say a DV FireWire or link Thunderbolt will make a difference?  The latest version of the film I is also not compatible with the camera, according to Apple.

  This camera needs a Firewire cable.

• I was checking my installed updates and came across a file that failed to install. It was the Cumulative security for Windows Vista (KB976325) updates

  I was checking the updates installed and came across this:

  Windows Vista cannot install cumulative security updates

  Error: 80200010

  Give this triple McAfee fix, a tourbillon: http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• As I was deleting some files from my hard drive, I came across some files that I couldn't remove with a message saying remove wite protection.

  As I was deleting some files from my hard drive, I came across some files that I couldn't remove with a message saying remove wite protection. Help!

  This error indicates that an application is using this file at this point here. If you are unable to remove it, restart your computer and then try to delete it.

  IF YOU ARE NOT SUCCESSFUL WITH THE above METHOD, THEN TRY to USE UNLOCKER, a free application that disables the application using the file that you want to delete.
  Download unlocker from here-http://www.filehippo.com/download_unlocker/
  Click on the above link and click on download the newer version on the right side of the screen.
  Download UNLOCKER from the link given above and install it. (you may need to restart the computer)
  Right-click on the file you want to delete, and then click unlocker.
  A new window opens showing all applications using this file.
  Select all files, and then click on unblock.
  Now right-click on the file you want to delete, and then click on remove.
  YOUR FILE WILL BE DELETED SUCCESSFULLY.
  If you are still unable to delete that file and unlocker shows no application, then follow these steps-
  Right-click on the file you want to delete and click unlocker.
  A small window will appear.
  In the drop-down list, choose delete, and then click ok.
  Your file will be deleted on the next reboot of the system.

• Whenever I turn my laptop on, it flashes with a blue message appearing saying "your PC came across a problem..." »

  I have a hp laptop with Windows 8.

  Whenever I turn my laptop on, it flashes with a blue message appearing saying "your PC came across a problem..." »

  I tried repeatedly pressing f8 as soon as I start my pc, however nothing appears when I try this.

  Is that what I can do to fix this?

  Original title: System Restore

  Hello

  Check with the help of HP, their online documentation and drivers, diagnostics and ask
  in their forums on known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =========================

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8.

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8). If you cannot start Windows 8 try using a repair
  Disc (see methods of doing a below) to access Mode without failure and other troubleshooting
  steps.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) to in a
  second or so time of the BSOD to provide more information as possible
  cause: see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
  Details of all application crashes occurred in your system. The information of the plant are extracted
  the .wer files created by the Windows Error Reporting (WER) of exploitation component
  system each time that an accident has occurred. AppCrashView also allows you to easily record the
  list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ===========================================================

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you have need of a system repair disc or other methods:

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  How to create a recovery USB in Windows 8

  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  How to start on the "System Recovery Options" in Windows 8
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Boot to the tip "Startup parameters" in Windows 8
  http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is there a way to enable and configure Volume discounts through the import spreadsheet product? Is there a way to allow more than 2 quantity thresholds?

  Is there a way to enable and configure Volume discounts through the import spreadsheet product? Is there a way to allow more than 2 quantity thresholds?

  Hi Michael,

  You can set thresholds via an import file. The best way to do this (and this goes for all importable data, included webapps, 301 redirects and so on) is the following:

  1. go to the Admin and create a single element, in case you create a product to test and set limits

  2. export these data - in your case, export product list

  3-take a look at how the data looks like in the export file to get an idea of how the format should be in the import file

  Unfortunately, you cannot set more than 2 thresholds, what is not possible at the moment.

  Thank you

  Mihai

• PC bluescreens, 'Your PC came across a problem'.

  Hi my PC bluescreens frequently and I don't know why. When it comes to computers im not very well informed, any help would be greatly appreciated, thank you very much! Here is a screenshot of what I get when I start my computer again.

  1. the MSinfo32 file was corrupt. Please download a new copy.

  2. the most recent dump file made since July 7, so I'm working from that. At this date, the module below was present and load it on your computer.

  Image path: \SystemRoot\system32\drivers\w64.sys {572f484b-455f-44b0-9d6a-da3ad2071365}
  Image name: {572f484b-455f-44b0-9d6a-da3ad2071365} w64.sys
  Timestamp: Fri Jan 30 19:45:30 2014 (52EAF22A)
  CheckSum: 00013032
  ImageSize: 00011000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  {572f484b-455f-44b0-9d6a-da3ad2071365} w64.sys

  http://www.herdprotect.com/572f484b-455F-44b0-9D6A-da3ad2071365w64.sys-4f0377c0d6df248cf2ed3b32650c6bd75dc10fc4.aspx

  As you can see, the link above, it may be adware. To make it reasonably certain that your system is clean, download, install, update and run a full scan. If there is malicious objects detected, remove them, immediately restart to finish the uninstallation and then rescan again until the scan is clean.

  Free version of Malwarebytes (mbam).
  http://www.Malwarebytes.org/

  Note: On the first screen once installation is complete, uncheck the box that activates the full trial version of Malwarebytes.

  Then,.

  Download and run AdwCleaner from the link below. ,

  AdwCleaner
  http://www.bleepingcomputer.com/download/adwcleaner/

  Note: Read how to run AdwCleaner on the download page, before continue.

  After that we made with the steps above, unfortunately, execution of the Verifier (DV) according to the instructions in the link below.
  Note: Be sure to read and remember the steps to reset the DV in a collision. Please download the Minidump generated recently to your onedrive and share the link here.

  Driver Verifier - stalking a bad driver to behave. Created by ZigZag3143, Co.authored by JMH3143
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983

  * Drivers of old and outdated devices that must either be updates or removed.* *.

  ===========================
  Image path: \SystemRoot\system32\DRIVERS\wg111v2.sys
  Image name: wg111v2.sys
  Timestamp: Thu Dec 25 21:46:26 2007 (4771 C 082)
  CheckSum: 00062F3D
  ImageSize: 0005D 000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Driver Description: NETGEAR WG111v2 54Mbps Wireless USB 2.0 driver NT

  Driver update site: http://kb.netgear.com/app/answers/detail/a_id/713
  ========================

  Image path: \SystemRoot\System32\drivers\wacommousefilter.sys
  Image name: wacommousefilter.sys
  Timestamp: Fri Feb 16 13:12:17 2007 (45D5F401)
  CheckSum: 00005ACE
  ImageSize: 00008000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Driver Description: Wacom (tablet) mouse filter

  Driver update Site: http://www.wacom.com/en/CustomerCare/Drivers.aspx or the OEM support Web site if it were integrated to your system

  Image path: \SystemRoot\System32\drivers\wacomvhid.sys
  Image name: wacomvhid.sys
  Timestamp: Thu Sep 21 19:29:14 2009 (4AB80C4A)
  CheckSum: 00010E49
  ImageSize: 00002A 00
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Driver Description: Wacom Virtual HID device driver

  Driver update Site: http://www.wacom.com/en/CustomerCare/Drivers.aspx or the OEM support Web site if it were integrated to your system
  NOTE: Maybe not pilots late 2007

  ==================================
  Image path: \SystemRoot\system32\DRIVERS\AppleCharger.sys
  Image name: AppleCharger.sys
  Timestamp: Mon Feb 18 23:17:09 2013 (5122FCC5)
  CheckSum: 0000CC56
  ImageSize: 00008000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Driver Description: Driver of GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm
   May cause BSOD on Win7/8 systems - uninstall to test (have not seen recently (January 15, 2013))

  Driver update Site: removal may be necessary. Updates can be found here - http://www.gigabyte.us/support-downloads/support-downloads.aspx

  =================================
  Image path: \? \C:\Windows\system32\drivers\avgtpx64.sys
  Image name: avgtpx64.sys
  Timestamp: Thursday, may 29 08:32:11 2014 (538728CB)
  CheckSum: 000120F3
  ImageSize: 00010000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  avgtpx64.sys belongs to the AVG safe search. Run the utility to remove AVG, following the link and if it does not, you will have to do it manually

  AVG Remover

  http://www.Avg.com/us-en/utilities

  Note: If you don't have a full AV program installed, please activate Windows Defender.

  How to turn Windows Defender on or off in Windows 8 and 8.1.

  http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  ==========================================

  Update or remove

  Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
  Image name: scmndisp.sys
  Timestamp: Thu Jan 17 02:48:03 2007 (45ADD4B3)
  CheckSum: 00008B 81
  ImageSize:, A-0000-000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Driver Description: neutral Netgear Wireless Solution

• Added information of the camera to Print output through all selected photographs

  Is there a way out of the camera information (as in the f-stop ISO Info etc) so that sound directly on the photograph during printing?

  Thanks in advance

  Print module > right side panel > section Page > Photo News > drop legend

• HP Pavilion &amp; "Windows 7 Upgrade Advisor came across a problem.

  Windows 7 would work on my laptop (HP Pavilion dv6132eu)?

  So I used "Windows 7 Upgrade Advisor" of the Microsofts. Which caused the error "Windows 7 Upgrade Advisor stumbled into a problem that your scanning devices. Upgrade Advisor needs to be able to scan your devices to determine whether your computer is capable of running Windows 7 ".

  The laptop is probably not good enough for Windows 7, why?

  I assumed, the Upgrade Advisor would tell me, what pieces of hardware is / are not specific to Windows 7.

  In a forum Technet, say, the Adviser is blocked by some HP hardware. Which?

  Best regards, Willem

  My problem has been resolved.

  Previously, the problem with "Windows 7 Upgrade Advisor BETA.

  I waited two months - now, I executed the Adviser again, resulting in "an important upgrade".

  And guess: update Advisor works like a rocket, finishing with a nice report with minor problems.

  So I think that the problem was a "Windows 7 Upgrade Advisor" - problem - not a HP computer laptop-problem.

• I have most of the software UTD and the magic mouse 2.  I continue to have these episodes where Safari zoomed spontaneously and I can't cancel it without hitting the back button of the browser.  Did someone came across this?

  On an IMac 27 "OS is El Capitan 10.11.2 Magic Mouse 2, Safari 9.0.2

  Seen the episodes while in Safari, it suddenly zoomed in and let even me not to scroll the page.  I have to click on the back button to cancel it. It seems to happen spontaneously, but my hand is still physically on the mouse, just I don't do anything with or to the mouse.  Seems to be developed after I went to the Magic Mouse 2.  Any ideas?

  Please, open the mouse in system preferences and uncheck that smart zoom.

• After having bought a new pc after 6 months with a PC, this new pc failed. I've done SwitchLe towers after doing that I came across a problem when I used microsoftfix it. When everything

  has been set back to normal, there was something wrong my user name and password there is six months. I forgot what the sn and the password. I there a way to know what my my old sn and password?

  Hello

  What operating system is installed on the computer?

  See the article:

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• While trying to install AD RMS, I came across the following error message on the Installation results page: Rights Management Services Installation of Active Directory was successful with errors

  Try to configure the Server Active Directory rights management failed. Exception has been thrown by the target of invocation. to

  System.DirectoryServices.Configuration.ProvUtils.EnsureGroupMembership (String
  strTargetComputer, String strUserName, string strGroup, Boolean, String strDomain
  fShouldBeMember)
  at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.EnsureUser)
  at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.Run)
  at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.DoProvision)
  at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.Run)
  to Microsoft.RightsManagementServices.Configuration.ProvisionerHelper.Run (OperationType
  operationType, data object)
  to Microsoft.RightsManagementServices.Configuration.ProvisionEngine.Run (OperationType
  operationType, Boolean passwordEncrypted)
  at Microsoft.RightsManagementServices.Configuration.CmdLineHandler.Run)
  Delete and re - install AD RMS to try the implementation again.

  Hi Samuel

  Your question is beyond the scope of these Forums for answers. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Directory Services Forum - Technet:
  http://social.technet.Microsoft.com/forums/en/winserverDS/threads

  Concerning

• Windows 7 on Dell Inspiron laptop; Error message: "PC came across a problem.

  * Original title: Windows 7

  Have a query, I was getting an error message in my computer dell laptop inspiron n5010 pc fell on a problem then I tried to install windows 7 OS from dvd by formatting drive C and F, but after the installation of its display, a message Boot Manager compressed. How do to solve this problem please help me.

  Thank you

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• I can't ping the interface inside of asa or telnet, when I came across the anyconnect vpn

  Hey Cisco net guys pro

  When I connect via anyconnect VPN to ASA 9.x, OS, I cannot ping inside
  the interface of asa or telnet, but I could ping at the interface of the router address
  ASA, the same two subnet

  Telnet 0.0.0.0 0.0.0.0 inside

  ICMP allow any insid

  Hi Ibrahim.

  Try 'inside access management' and let us know how it rates.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• 'Your PC came across a problem' KERNAL_SECURITY_CHECK_FAILURE. »

  Separated from this thread.

  Hi Patrick,

  My laptop is showing an error "Your PC fell on a problem" KERNAL_SECURITY_CHECK_FAILURE.

  So I posted a tweet to @WindowsSupport to help me solve this problem.

  They have posted you answer me to follow.

  According to your suggestion, please find DMP zipped file in the below URL.

  https://www.dropbox.com/s/u89bvnk2d4xm0gt/dmp.zip?DL=0

  Please check and help me solve this problem.

  Thanks in advance.

  Error checking 139, {3, ffffd0002213a310, ffffd0002213a268, 0}

  Probably caused by: NETIO. SYS (NETIO! NsipCachedRegistryKeyListLock + 60)

  NETIO. SYS has been marked as the culprit, but we know it's unlikely. This is probably caused by a third-party driver.

  To help it nail, please run the Verifier (DV) according to the instructions in the link below.

  Note: Be sure to read and remember the steps to reset the DV in case of crash and post a link to the newly generated crash dump here.

  Driver Verifier - stalking a bad driver to behave. Co-written by ZigZag3143 & JMH3143

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983