I can email is no longer drive

Similar Questions

• CAN 'EMAIL' is no LONGER in IncrediMail

  CAN SOMEONE HELP ME PLEASE?

  MY LAPTOP IS ONLY 2 years OLD and I could always send a photo while I had my Windows Live PHOTO GALLERY opens.

  Now, I get this message:

  "There are no associated messaging program to perform the requested action.  Install an e-mail program or, if it is already creating an association in the Panel "DEFAULT PROGRAMS".   HOW?  WHAT DO?

  YES, I HAVE AN E-MAIL PROGRAM!   I looked in the default programs control panel and did not understand what he wants me to!

  Did someone help me please you CAN get my computer running back as he uses too?

  Thank you so much!

  Hello

  In this case, I suggest you to run the Microsoft Safety Scanner to check the virus/malware on the computer. Consult the following link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• ORA-01461: can bind to a LONG value only for insert into a LONG column

  Hello
  
  Oracle XE on RHE dedicated server
  

  create table cvDetails(
  cd_id number(14) primary key,
  cv_id number(14) constraint education_fk references CvProperties(cv_id),
  nationality varchar2(230),
  objectives varchar2(3900),
  name varchar2(230),
  fatherName varchar2(230),
  motherName varchar2(230),
  dob varchar2(230),
  gender varchar2(230),
  mStatus varchar2(230),
  passportNo varchar2(110),
  email varchar2(230),
  phone varchar2(45),
  mobile varchar2(25),
  address varchar2(2500),
  state varchar2(230),
  zipCode varchar2(230),
  city varchar2(230),
  education clob,
  experience clob,
  skills clob,
  languages varchar2(1400),
  hobbies varchar2(3200),
  achievements varchar2(3900),
  references varchar2(3900)
  );
  
  create sequence cvDetails_seq
  start with 1 increment by 1;
  
  create or replace trigger cvDetails_trig
  before insert on cvDetails
  referencing new as new
  for each row
  begin 
  select cvDetails_seq.nextval into :new.cd_id from dual;
  end;
  /

  Why do I get the error of subject?
  
  Thank you in anticipation

  >
  in any case, I checked manually according to your instructions and found that this objective column is of character input more than specified.
  >
  Glad you found the problem, but I hope that you learned a lesson that is time consuming.

  It must be remembered that we have no access to your environment. If we do not know which servers, clients, tables and users that you use.
  It may seem simple to you but doesn't realize that you provide us with two slightly different versions of the cvDetails table.

  The original post had this
  >
  objectives varchar2 (3900).
  >
  But when you have provided your 'cvDetails desc' journal text has
  >
  OBJECTIVES VARCHAR2 (3950)
  >
  It is the same table that you started with how the column suddenly grow 50 bytes?
  This means that you did from different parts of the present in the two schemas or on two servers or you change the table between the two.

  You can't address properly when you do this. By chance it is the column that you said is now the problem.
  In SQL, the maximum length of a VARCHAR2 is 4000 bytes; no characters but bytes. Nothing more than 4000 bytes would probably be a LONG in the generic sense.

  If your error
  >
  Re: ORA-01461: can bind to a LONG value only for insert into a LONG column
  >
  means that you try to 'bind a LONG value' to a column VARCHAR2 and you can't you can 'bind a LONG value only for insert in a LONG column.

  In the proper context, the error makes sense.

  You probably have a problem with

   ps.setString(2,  objectives);
  

  because the 'objectives' has a length of more than 4000 bytes.

  Remember this answer from you?
  >
  I have read and found that there may be a problem with the driver JDBC or Characterset. Am I wrong?
  >
  The 'Hello' ASCII string is five characters and five bytes because the ASCII code is a set of characters in a single byte. The same string internally in Java is five characters but ten bytes because Java uses UTF16.

  So, if the character set of the data itself is double-byte character set then anything more than 2000 characters (4000 bytes) is a "LONG". And if your column is defined as VARCHAR2 (3950), which means bytes a doublel-byte character set which are characters of 1975.

  Then you said in a response later
  >
  I checked by the SNA Server and oracle that are both of the same but new thing I found is that oracle does not allow more than one clob column in a table. Is this true?
  >
  Somehow a hypothesis has crept it that the problem was not a driver JDBC or Charaterset, but because you can not have more than one clob column in a table.

  You could have easily tested for yourself by doing what P. Forstmann - tried to create a table and see.

  Then you completely ignored my advice
  >
  I suggest to you isolate the columns actually causing the problem.
  Change your code to insert only a few columns. When it works, add more than a few columns.
  This will then tell you which column or the columns are at the origin of the problem.
  Display the results once you determine a column that causes the error.
  >
  When you have finally made the simplest things, you have found what was causing the problem almost immediately.

  Many times you don't need 'experts' - you must use a rigorous, methodical, process step by step.

  ALWAYS, ALWAYS, ALWAYS reduce the simplest possible code example that illustrates the problem.
  If you had followed this a rule would have probably found you the problem and makes you look like the 'expert '.

  There are no shortcuts.

• Have not used my email in a long time and I forgot the user name and password

  Hello. I don't use my thunderbird email in a long time and can't remember my user name or password if I remember my email address. How can I connect?

  Your user name is all or part of your e-mail address.
  The user name and the password is given with your email provider. You need to communicate with them.
  Most providers have a password reset link on their page for help by e-mail.

• My email backup is an old email that no longer exists. This prevent me to reset my password for iMessage. What should I do?

  Hello

  I tried to connect to iMessage and forgot my password.

  I forgot the answers to one of my two security questions.

  My email backup is an old email that no longer exists.

  This prevent me to reset my password for iMessage.

  What should I do?

  Best

  Peter

  So, your password for Messages is the password ID Apple that you are connected to Messages with, except if you use two-step verification, in which case, it would be a specific App password that you can build at any time.

  Do you mean that you forgot your password Apple ID? Or, you use two-step?

  See you soon,.

  GB

• I can't see my hard drives partition more :-/

  Hello

  I can see is no longer a partition that I had on an external drive. I know that this probably isn't the best thing to do, but I had a backup time machine on this partition (such as one on my hard drive to the Mac).  I think I've ejected the drive not correctly once, and since the partition of time machine no longer appears

  Disk utility does not launch or that hard drive is plugged so I can't reformat it even :-/

  If anyone knows any more options?

  Thank you very much

  Nick

  You can try to disconnect your external drive, reboot into Recovery Mode (command-R), and OS X Utilities launch disk utilitymenu, connect your external drive and see if you can format.

  I purchased Drive Genius 4 OWC (Macsales.com) and had something similar happens where I could see all the partitions on the external drive but could not repartition or delete one of them. With Drive Genius, I was able to repartition and format. So, you might need a 3rd party app like Disk Warrior and Drive Genius (trial download) to manipulate your external drive.

• Any ideas on how I can email a pdf conversion to customers after update 5.6.1 pages?

  I lose even MORE time to productivity and business from another update removed the feature. Why can I email is no longer a document after conversion of a pdf file or a word file?

  Is the entrance to absent post on your part: send a copy submenu? It also lacks in the system preferences: Panel Extensions: Menu items share?

• Can I exchange the C: drive?

  I have PC with XP Professional Version 2002 Service Pack 3. I also have Quickbooks and Microsoft Office Professional running on it.  This is my work computer, so I don't want to have problems with it.

  I ran disk cleanup and Disk Defragmenter last night. I have two hard drives on this desktop, which is my work computer.  Here is the result of fragmentation:

  C: drive capacity - 37,26 GB, free space - 7,76 GB, percentage free space - 20%.

  F: drive capacity - 112 GB, free space - 80,76 GB, percentage free space - 72%

  NOTE: I did not define this PC upwards.

  I moved everything I can think of the F: drive.  All my documents, pictures, data, CAD files, stored on the F: drive.  But all programs work on the C: drive.  Is there an EASY way to share things while I'm cramped for space?

  Rebecca

  Rebecca

  I understand your situation. All I wanted to do was encourage you to plan ahead. My motto that I used when posting to the newsgroups Microsoft, now unfortunately is no longer available, was "interrogation, plan, execute".

  I just was "forced" to abandon a Windows XP box and to migrate to a new computer. I could have bought a 32-bit computer and install Windows XP. Instead of standing still, I decided to make a great leap forward. Now I have Windows 7 Ultimate (64 bit). This has created a lot of problems to solve. Much more than I enjoyed at the outset. However, it will be the right path for me, but I recognize that the establishment of such that the change is less easy for others.

  One of my major problems was the use of hardware and software is more easily available and supported. In my case it was based on a 56 k Data / Fax modem. You can buy all of the printers and scanners incorporating a Fax, but I'm not a believer in "All in One" for a number of reasons. After reflection, I was moved some operations of the fax to send earlier. This experience illustrates how you can make 'free' changes and mitigate the inevitable problems when you do not upgrade.

  I have two other suggestions of freeware for you to try. They just re-reading the second paragraph of your first post.

  A better program of disk cleanup is cCleaner but note that cCleaner will not manage system restore points. It is still necessary to remove older restore points using disk cleanup facility. Perform these steps before the defrag for best results
  http://www.CCleaner.com/download

  A warning about cCleaner. Do not use the registry tool.

  A better tool than Disk Defragmenter is Defraggler

  http://www.Piriform.com/Defraggler

  Hope this helps, Gerry Cornell

• How can I change how long file names & file can be?

  How can I change how long my file names & file can be?

  The path length limit cited in the article referenced by Abdul R is 260.

  It depends on the length of the full path to the file (for example, C:\Program Files\filename.txt). Windows limits a single path to 260 characters. That's why you can sometimes get an error when copying a file with a very long file name to a location that has a longer path than the location of the original file.

  -------------------------------------

  However, there are various subtleties that reduce that number in practice to 255 (or less), including all spaces.

  We start with the absolute limit imposed by Windows. The API operating system puts a limit (called MAX_PATH) 260 characters for the display name with the included path. This number is often cited. However, the current limits are smaller due to various other restrictions. For example, all names have to have a terminator at the end normally null only the computer see this fine marker, but it is considered as a character if there are really only 259 characters available. (Forget to count the null terminator is a common mistake). A three other characters are used by the designation of the drive or volume (for example, C:\). Thus, the limit to name all the folders and subfolders as well as the file is reduced to 256 characters. However, no files or a folder may have a name more than 255 characters. This includes spaces and some backslashes used as separators. This limit of 255 characters per object is imposed by the way Windows to encode the characters but other considerations usually impose lower limits.

  of http://vlaurie.com/computers2/Articles/filenames.htm

  ---------------------------------------

  More details

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa365247 (v = vs. 85) .aspx

  =====================

  And now, the grand fanale, the answer to your question:

  You cannot change the limit of the length of the path. It is imposed by various requirements and is coded in the system hard. You can set the 'balance' between the files and folder/sub-folder names. For example, use short directory names in order to use more long filenames.

  ======================

  All this can be a nuisance to the user. A file name may be OK when originally created but be too long if the file should be copied or moved to another location whose path is longer.

  There may be additional complications if the files are to be burned to CD or DVD.

  Tom Ferguson

  Italics are added. They indicate a source citation as indicated.

  TF

• A weird exception in 12 c (ORA-01461: can bind to a LONG value only for insert into a LONG column)

  I have a Windows application that accesses a database of 12 c Oracle via ODBC (driver version is 12.01.00.01).

  I have a table with a column of key named REGION_ID (NVARCHAR2 (9)) and a dozen other columns, of which three are named region1 and region.2 elle3, all of type NVARCHAR2 (40).

  When I try to insert a string in the scope of the region1 is longer than 9 characters (length of REGION_ID), I get an error ORA-01461 (' can bind to a LONG value only for insert into a LONG column). If I set the length of REGION_ID be NVARCHAR2 (15), so I can add channels to the region1 in length up to 15 field until I get ORA-01461 exception again. Curiously, if I change the name of column region1 to REGIONONE, I don't get any errors, and everything works fine. It's almost as if the column name region1 is being confused with REGION_ID backstage.

  Any ideas? I am using SQLBindParameter to bind the columns, and all calls are successful. I get the exception when I run the insert statement. This same code worked for previous versions of Oracle (9i, 10g and 11g). And if I use a driver of client 11g against the 12 c server, I do not receive the exception.

  Thank you!

  It is a component of ODBC driver bug in 12 c and it is fixed. You can download and install the fix for bug 18232462 or the last window for 12 c patch cumulative/bundle.

  Thank you

  Spengler

• I can save is no longer a PDF file locally from the s/w upgrade.

  I install Acrobat Reader DC last version. Since then, I have the following problems:

  
  

  I can save is no longer a PDF file locally from the s/w upgrade. I can download for the cloud and export to docs and download on my PC. But I can't open a PDF file and save it to my desktop. If I am sent an e-mail with a PDF instead of opening, reading and recording, I have open, close, and then go to my email and save as an attachment.

  
  

  Why? I paid for my export utility a couple of years and never had any problem

  
  

  Help, please
  

  Hi Nick Read,

  Please uncheck 'Show online storage when you save files' under ' Edit > Preferences > general.

  Then, to restart the player and try saving the file again.

  Kind regards

  Ana Maria

• I can access is no longer up to Dreamweaver

  I can access is no longer of Dreamweaver, which is a real problem because all the sites that I build before a couple of years have been built in Dreamweaver and now I can not edit!

  I had used very rarely and only for updates because I am mainly working in WordPress these days - without problem, and then all of a sudden I couldn't.

  Here's what happens:

  If I go to one of my sites via an ftp client and right-click on a page saying that I want to edit in Dreamweaver, Dreamweaver opens but there is no navigation bar, nothing else that the header of Dreamweaver that has that 'the Services' "hide Dreamweaver", "hide others" and "Quit Dreamweaver" as my options. (screenshots attached)

  If I go on my hard drive and you try to open Web sites that I build in Dreamweaver, the same thing happens.

  Y at - it an update, that I missed? It comes to Dreamweaver CS5 I speak, and I'm not on Creative Suite. I don't even no what version is that I have absolutely no opinion other than the screenshots that I value. I'm a Mac - OS X Yosemite, 10.10.3 version user.

  Any help or insight you can give to this question would be much appreciated.

  Thank you!

  Best wishes,

  Amy

  

  

  https://www.Pinterest.com/PIN/create/extension/

  You can find programs for older versions of Dreamweaver here: Adobe - Dreamweaver Support Center: Updaters.

• How can I use a flash drive with my ipad pro

  I want to buy an ipad pro for school, but I will need an adapter to plug in my flash drive. I was wondering if I would be able to buy an adapter that I can use for a flash drive.

  You can buy a control usb3 adapter, but can connect a USB fat32 and you can import photos because there is no file browser.  Flash player cannot be connected or sick... instead of you can only buy western digital my passport wireless hard drive to keep your files and my cloud app works very well with the ipad pro

• I can email more pictures of pictures is

  I can email is more photos of Photos, that option has disappeared from my menu located on the right side of a particular image file, how do I get it back?

  What version of Photos do you use?

  On Photos for Mac you should see the possibility to send a photo, if you select a photo, and you open the menu share in the tool bar, like this:

  

  If the message is missing from the share menu, click on the item of "More"... "in the menu share, add the Mail for stock options.

  If the Mail is not available, see this support document: options on stock if or markup is missing after upgrade to OS X Yosemite or El Capitan - Apple Support

• Can save us our system drive on Dropbox?

  Hello!

  As the title says, "can save us our system drive on Dropbox?

  Thank you!

  Better to backup to an external drive using the Time Machine application in your Applications folder.