How to connect wireless hp photosmart c4600 to laptop

Similar Questions

• Photosmart 7515: Impossible to connect wireless to Photosmart 7515

  First of all, the printer worked before end of June when a patch Win7 crashed and I had to reinstall the operating system. I immediately upgraded to Windows 10; I am running anniversary of Windows Update (AU). I don't have reinstall the printer before last night. I am running Windows 10 a a full charge 18 Alienware. I am writing from this computer so I'm connected to the Internet and I'm connected wireless.

  I download the updated 2016 (PS7510_1315 - 1.exe) displayed for my printer and installed it, but when it came time to connect to the printer, it didn't - do not see the printer.

  I've reconfigured the printer twice and during each installation, the printer sees all networks wireless (including me), I select my network, the printer asks the password of my network and then it connects successfully to my SSID. I print the results of the wireless network Test with the bottom line of "no problem found" for the correct SSID. My computer is connected to the same SSID. On the printer, the blue wireless light is solid on and signal strength is displayed on the printer shows also strong.

  I then connected to my router and updated all the connected systems. The display shows four wireless devices, one being the printer. The printer didn't show the MAC address, not a name or one IP address like the other three, then I restarted the routed with the same results. Then, I opened an OS command window and ping the IP address - failed with "request timed out" and "destination host unreachable".

  So, I'm looking for help. The printer says that it is connected properly wireless with intense beep and a DHCP IP address which is also in the appropriate interval. I also tried the host name: dhcppc3 and that did not work (didn't expect really, since the INVESTIGATION period did not work but I wanted to be thorough).
  In advance, thank you!

  Nick.

  Hi @LoneRider,

  Thanks for joining the Forums of HP Support for a solution to your connection problem.

  I understand you're rying to connect a HP Photosmart 7515 e-all-in-one printer wireless to a computer Windows 10, but the installation failed because he wasn't able to find the printer. I would like to help with that.

  Here is a document of support designed to be used with this problem - printer not found during Network Driver Setup (Windows).

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• How to connect wireless scanner to new laptop?

  I have a wireless HP Photosmart 5510 printer/copier/scanner.

  It works perfectly with my new computer HP Pavilion laptop, but I can't understand how to add the scanner as a program on my laptop? Can anyone help?

  Hello. I have Windows 8.1. I did not install any software of printer/scanner on my new laptop - just conncetd to the print function when I started using it.  There is no icon on my laptop rpinter.

• How to connect wireless hp j6450

  I CAN'T IT CONNECT WIRELESS AND IM NOT ABLE TO USE THE SCANNER ANY HELP WOULD BE GREATLY APPRECIATED THANKS

  What router?  What operating system?

  To connect to the router, on the front of the printer: Setup > network > Wireless Setup Wizard.  Once the printer is connected to the router (wireless network), we can work on the connection of your computer, whatever it is.

• How to connect my Samsung wave with my laptop via wifi?

  original title: wifi connection

  HOW TO CONNECT MY SAMSUNG WAVE 525 WITH MY DELL INSPIRON 1525 BY WIFI

  Hello

  I suggest you follow the links below and the Coachman

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  You try to connect the phone directly on the system or through a router?

  You will not be able to connect the cellphone to the PC directly,

  See the explanation: http://www.samsungwaveforum.com/samsung-wave-troubleshooting/connecting-wave-to-pc-through-wifi/

• How to connect a security camera to a laptop

  I really need help setting up my camera system

  * original title - I need to connect a security camera for my laptop but I don't find it anywhere in my computer it says it installed but no show what do I do? *

  Contact the manufacturer of security cameras to support with their product.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect wireless with Photosmart 2510

  I just upgraded my router from G to N.  I have a Linksys WRT10N.  My network is secured with WPA-Personal.  Since I upgraded from G to N and WEP to WPA, I'm unable to get my 2510 Photosmart to connect to the wireless network.  Initially, I was in WPA2 and downgraded my network to WPA with on security a bit of luck.  I entered all encriptación WPA data in the web browser integrated prior to installation.  I tried to install it several times and everything seems to go through OK but the blue light on the cover of never turns on again when the ethernet cable is disconnected.  When I run the network config. page it says "scanning" status of wireless.

  I talked to Linksys and they told me that the network N should work down to a B network printer.  Does anyone have any suggestions?

  Thank you!

  Hi Kim,

  All printers inkjet wireless HP since 2004 supports WPA - PSK and WPA2-PSK.  All new HP inkjet will certainly support WPA - PSK and WPA2-PSK.

  I'm more familiar with the WRT54G, but the WAPG works as well.  Here is how to convert the WRT54G in a simple access point:

  1. Connect LAN port of the WRT54G #1 and open the web without wire-router page (it should be 192.168.0.1 or 192.168.1.1)
  2. Go to the wireless section of basic wireless settings.  Create a new SSID and choose a channel without overlap, which differs from the WRT160N.  In North America, the overlapping channels are 1, 6, and 11.  Press to save the changes.
  3. Go to the wireless security section and the configuration up to WEP.  Press to save the changes.
  4. Return to the configuration page.  Disable the DHCP server and set the router IP address to something other than then the address IP of WRT160N.  For example, if the WRT160N IP address is 192.168.0.1, and then set the WRT54G to 192.168.0.201.  Make sure that the first three groups of numbers of the IP address are the same.  Press to save the changes.
  5. Now, connect an Ethernet cable between WRT54G #1 LAN port and one LAN of the WRT160N ports.

• How to connect wireless the WRT54GS

  I have a router WRT54GS I want install Wireless with my Windows XP desktop that has only an installed wireless adapter. There is no ethernet on the pc port. I have reviewed the Stickys are and read that FAQ, but still did not find a response stating clearly how to set up the router without using an ethernet cable connected to the pc. I want to be able to access the configuration page based on the web as well for what I can fix my settings. Any help would be greatly appreciated.

  As a general rule, it is best to configure the router using a wired connection to be sure that you set up your router and not someone else... So if you have any wired ethernet device, it is best to use it rather than try a wireless only configuration.

  You can set only through wireless, however, you must ensure that you are connected to your router at the beginning. More simple test would be to unplug your router power and control for available wireless networks. If there is still a "linksys" network to be seen, you must be very careful.

  Anyway, and then reconnect your router to power. Do your research to computer networks and connect to the network not secure "linksys". It is best to put the computer near the router to do this to make sure that you connect to your router.

  Then open the web interface at http://192.168.1.1/ default password should be "admin", no required user name.

  To be sure, it's your router, go to the status page, see that it's really a WRT54GS and check MAC address, that you see here. It must be identical to that printed in the WRT (maybe one or two off the coast in the last digit). If it comes from a completely different MAC address, check local and SubTabs wireless network and MAC addresses there. If all MAC addresses are completely different, unplug the router from the power and see if your computer is always connected to the interface web or not.

  Anyway, once you have established this really is the web interface of the router, check the version of firmware and on the router and that is available online. It is better to update the firmware before doing the configuration. If you have the latest firmware, you must configure the router. I recommend the following steps:

  1. go to the wireless page. Change the SSID to something unique. Save the settings.

  2. you will lose the connection. Redo your computer search for networks. You should now see the new unique SSID. To connect to this network and reopen the web interface.

  3. then set up wireless security. Enable WPA2-Personal with AES encryption and set a strong password. Save the settings. You will lose the connection.

  4. now, you have to reconnect. Depending on your computer and use the software to set up the wireless, you may need to remove the unique SSID firstly in the preferred network list before you can reconnect. Usually, the computer remembers the SSID joined before and does not connect if security settings do not match the one used before. But you should know that.

  5. as you are still using XP the computer may not support WPA2 and AES encryption (which is the best and strongest that you can use today). So, if you're absolutely not able to reconnect to the computer you will need to reset the default router by pressing the reset for 30 seconds button and start over. Then choose personal WPA with TKIP and a strong password. It should work. I would not recommend to use WEP is easily broken.

  6. Once you have successfully set up your desktop to connect to your secure wireless network, you should make a change more: change the password for "admin" on the configuration page "Administration".

  7. don't forget to clean the list of preferred wireless networks, in particular, do not forget to remove the network "linksys" to this list. Otherwise, your computer can automatically connect to a network "linksys" if one comes available nearby.

  This should be it.

• How to connect wireless to hide United Nations

  I can't connect to my wireless beause my wireless profile says that it is hidden-how I do a hide my connection?

  I can't connect to my wireless beause my wireless profile says that it is hidden-how I do a hide my connection?

  Go to your wireless router and configure it to the SSID of the wireless network is broadcast. There is no reason to not broadcasting your SSID and it can lead to connectivity problems.

  http://TechNet.Microsoft.com/en-us/library/bb726942.aspx#EDAA

  Use encryption, WPA2 is highly recommended, and a long random ASCII of the keys to protect your network. Personally, I use WPA2-Personal, (WPA2-PSK [AES]) and an ASCII random 63 character key on both of my wireless home networks (private and invited).

  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

• How to connect wireless to the printer. ? I am running windows 7 on a Dell inspiron 1545.

  Need help if possible wireless connection. or to the "hp officejet 4500 desktop printer.  WiFi instead. I loaded the drivers and it said it was successful.

  Hello

  Your printer has as USB connection:

  

  And not available to add accessories:

  http://support.HP.com/us-en/document/c01987635

  Options

  (a) is your router wireless print server option? If so, connect the printer to the router using the USB port.

  (b) purchase a wireless USB print server, not much on the market today and the success rate is questionable (based on my tests).

  (c) use USB connect to Dell printer now and buy a new printer later.

  Kind regards

• How to connect to HP Photosmart 6525 OS Mountain Lion

  I am trying to install a wireless configuration of a H P Photosmart 6525 to a Mac Mini with OS Mountain Lion, but there is n o option this operating system.

  Hello

  Below you can download the drivers for the Mountain Lion:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-106177-3&cc=us&DLC=en&LC=en&OS=4142&product=5271613&sw_lang=

  Be sure to select the HP recommended software during the installation of the software.

  Once you have finished restart your Mac and your software update execution to ensure that the drivers are perfectly up-to-date.

  Kind regards

  Shlomi

• How to connect wireless bluetooth nokia bh 503 headset to compaq presario cq42?

  Hi, I use a laptop Compaq Presario CQ42.

  Im hoping to connect my headset Nokia BH503 wireless to my laptop Compaq Presario CQ42?

  My configurations areCeleron (r) Cpu Dual-Core T3500 2.10 GHz, 32-bit operating system.

  My problem is that the bluetooth in my laptop is not able to find my Nokia bh503 wireless earpiece. I intend to use it to listen to the sound of my computer and use Skype on occasions. I suppose that, just the audio would solve. Could someone please point me in the right way that I tried several times, but my computer doesn't seem to be able to find the device at all.

  Thanks in advance, hope this will be enough information.

  Install the drivers from here and then watch the video below to set up the headset.

• How to connect wireless toshiba A660 on a Canon printer

  The title is the question!  I use windows 07:00 using win 7 Home

  Hello

  You should try to go directly to Canon and download the drivers for this printer.

  Here is a link to the support page of Canon. Just find your printer model in the menu and install the drivers for Windows 7 on this laptop.

• Unable to connect wireless to c4700 printer to laptop

  I have a printer hp c4700 I used to print via bluetooth to my laptop to. Recently even after troubleshooting I am unable to print to the printer. I even tried to connect to the printer via the usb port. I need some suggestions on measures to solve this problem.

  The basic idea is to read the User Guide and installation instructions.

  Assuming you have done this, you should at least in part, explain what you have tried, what happened and provide the full text of any error message you received.

  In your explanation, please include any additional material that is at issue, such as a wireless router or a wireless adapter that can be connected to your computer.   As the All - in-One Printer HP Photosmart C4700 seems not supported Bluetooth integrated, you must include a description of any devices you used when "allows you to print to this [printer] via bluetooth.  (If you have another printer, please indicate the full model designation).

• How to connect a kindle fire to my laptop?

  How can I connect my kindle fire, that does not have a driver on my laptop?

  From:
  http://www.Amazon.com/Forum/Kindle?_encoding=UTF8&cdForum=Fx1D7SY3BVSESG&cdPage=1&cdThread=Tx14BWPZ7KR63F4

  "The customer service saw my post here and called me." They said that there is no driver and that fire should open (not in mode "standby") before plugging the computer. I plugged and again got this message on the installation of the driver, so I just clicked on "Don't ask Me This Again" and the box opens for Windows Explorer folders. I disconnected and reconnected the message trying to install a driver is now gone and I can go to Windows Explorer to view the folders in the fire. »

  "My computers windows 7 does the same thing. However, when I unlock the fire the computer can access the drive, even if he always tells me he needs a driver. »

  Kindle support:
  http://www.Amazon.com/GP/help/customer/display.html