I can make a presentation of Keystone on iphone 6 using the AV connector in area no wi - fi?

Similar Questions

• Can you have SMU 1062 q turn on without using the power button

  I use a q SMU-1062 for a test project that will take place inside a protective case.  The power button on the chassis will be covered by a plate on the protective case that make it boring and difficult to switch on using the power button on the chassis.  The chassis will be plugged into a power strip of travel - lite which is mounted in the case.  Is it possible that I can have the power to frame on when I turn on the power strip?

  I found another route.  In the controller BIOS, I changed the parameters of loss of AC power to TURN on after that AC is returned.  This allows me to use the power strip in my configuration to control the electric network distributed to the controller.  The following steps will describe how I got this.

  1. Power of the SMU-8115 controller.
  
  
  2. A message will appear on your screen, press to enter SETUP
  
  
  3. Select 'Remove' (quickly, because you don't have a lot of time before the window disappears and the controller continues to load normally.)
  
  
  4. This will open the main Menu of the BIOS
  
  
  5. Select the Advanced tab (use the arrow keys to highlight the selections and the different tabs, select a setting change with 'enter'
  
  
  6. Select > Configuration power and rest
  
  
  7. Change the configuration to power on when power is restored.

  The controller can be normally close by using the start menu, and "shut down".

  Start button / stop of the chassis is still capable of turning the power on to the controller, but now when I shut off the AC power strip and then return power, get the controller chassis.

• What can I do if I found an iphone and that the device is erased but still linked to account of the former owner.

  What can I do if I found an iphone and that the device is erased but still linked to account of the former owner. ?

  Call your local police.

• Can I connect my WiiU to my iMac and use the iMac is a screen to play games?

  Can I connect my WiiU to my iMac and use the iMac as a screen to play games WiiU on it?

  N °

• I can map a public IP address on a pc using the router tplink?

  I can map a public IP address on a pc using the router tplink?

  Moved from the community involvement Center

  Original title: Port forwading

  Check with the support of tplink.

• How can I load updates from pilot to another pc using the ethernet cable?

  How can I load updates from pilot to another pc using the ethernet cable?

  You would be better to use a flashdrive rather than an Ethernet cable. To connect using an Ethernet cable you need a crossover cable and then configure the network cards.

  I hope this helps.

• Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  I have windows vista 32 bit.
  -------------------------------------------------------------------------------------------------
  Re-edit:-I do not use the Device Manager to find all my drivers and by clicking on each of them... one at a time update.
  Y at - it another way to find and update the drivers at the same time and for free.

  Your question is too terse and contains too little information for anyone to
  help you.  Read this article and try again:

  http://support.Microsoft.com/kb/555375

• You can wrap text around a picture in E10 by using the rich editor? You cannot superimpose an image and an area of just text, so how would this work?

  You can wrap text around a picture in E10 by using the rich editor? You cannot superimpose an image and an area of just text, so how would this work?

  Amy,

  You must place the image in the text box to wrap around him, or a heavier way test, you can use text several boxes and place them strategically around the image, but if you want to hyperlink the image you have to place it inside the text box and you can not overlap images and text in e-mail boxes.

  Hope this helps,

  Leigh

• I bought Adobe Creative Suite 5.5 Design Premium a few years ago. I have since upgraded my windows computer to a new one without a CD player. How can download & install Adobe Creative Suite 5.5 without using the disc that I bought?

  I bought Adobe Creative Suite 5.5 Design Premium a few years ago. I have since upgraded my windows computer to a new one without a CD player. How can download & install Adobe Creative Suite 5.5 without using the disc that I bought?

  Here are the links to download:

  Download CS5.5 products

• I can't get a list of bullited when you use the synchronized text feature.

  I can't get a list of bullited when you use the synchronized text feature. The option is grayed out and no assets. Any tips? I'm doing something wrong?

  It is by default, the synchronized text does not change any style and other visual attributes associated with the instance.

  Thank you

  Sanjit

• where can I load adobe element 9. If I use the link of the item it will be me talke version 12 and I don't know if my series works for version?

  where can I load adobe element 9. If I use the link of the item it will be me talke version 12 and I don't know if my series works for version?

  Certainly, your Elements 9 serial number will not work to 12 items.

  You can re-download Adobe Elements 9

  Download Photoshop Elements products | 9, 8, 7

• Can I create flyers of club using the 10 Elements? Are able to do software?

  Can I create flyers club post on facebook using the 10 Elements? Are elements software able to do this project? Thank you all!

  

  jrdakine wrote:

  Thanks for your reply, I'm new to this sort of thing. I wanted to create flyers and my own photos or pictures on the web, Word will be able to handle the graphics or item 10 would be better. Thank you

  This kind of prospectus Im looking to do... Thank you all!

• I can't delete some programs of HP printer by using the Add/Remove

  Add/Remove programs.

  I have some HP printer programs that I can't remove by using the Add/Remove in the control panel. Any suggestions please.

  Hi NeilOsborne,

  1. what happens when you try to remove the program in Add/Remove program?

  2. do you get an error message?

  Follow the steps in the article.

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Error message when removing program with Add/Remove programs

  http://support.Microsoft.com/kb/141697

• How can I restore my computer to factory settings with using the computers original disc?

  Original title: ' ideas: insert an error code or give a brief description of what you're trying to accomplish or difficulty. " __ »

  I want to know how I can restore my computer settings to factory with using the original disk of computers or to create a recovery disk

  Here you are options to reinstall Vista:

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Can call us and to run a query by using the db adapter or adapt oracle applications

  Hello
  
  Can call us and run a set of request (which runs a set of packages in a sequence) using the adapter db or oracle apps adapter similar to the call of a stored procedure and the simultaneous program?
  
  Thank you
  RV

  (1) on an appeal the DBAdapter in a BPEL sequence, make sure you assign the 'property' transaction = partnerlink participate.
  (2) or create a package that calls other packages in a sequence

  Marc
  http://orasoa.blogspot.com