F4580, not found exit scan

Similar Questions

• Receive the error message"MFC-7860DW LAN is not found" when scanning

  Original title: printer all-in-one Brother MFC-7860DW after Windows update problem

  Shortly after that I installed an update through Windows for my Brother multifunction printer, I could not scan documents to my printer wireless to my Toshiba laptop.  I got an error message saying "MFC-7860DW LAN is not found."  Yet the wireless connection between the printer and the router is fine, and I can print from my computer very well also.  I did this for a long time so I have something had happened recently.  The update was allegedly from brother.  I spoke with the brother support and they gave me a way to scan the computer using Windows Fax & scan, but I really need to be able to make it from the printer itself.

  I have reset the PC to a restore point before that I did the update of Windows, and I uninstalled and reinstalled the software of the printer 3 times, including the connection with the wireless system, all without effect.  When I check the Brother Installation Diagnostics file, it shows that the scanner driver has no installation and connection.  All the other drivers installed correctly.

  Any ideas how to install my scanner driver?  Thank you!

  Try Ronald ron's response

  Altho, reg cleaner ccleaner can erase valid entries reg sometimes. So, I don't know if I would use that

• computer not found when scanning printer form on a computer

  Hello

  I have a HP Photosmart 5520 all-in-one printer. I have 2 operating systems on my computer: OS X 10.9 Mavericks and Windows 7. The printer is connected to my router wireless. The printer works correctly under Windows 7, but in the Mavericks, I can't scanner from the scanner to the computer (it is said: machine not found). What can I do if the Analyzer detects my computer?

  Problem solved by the installation of HP - inkjet ink-SW-OSX - Mavericks_v12.34.42.dmg

• C error: ld: library not found for - introduction collect2: error: ld returned 1 exit status

  I'm trying to compile the "Hello World" code C base with gcc, but the following error message:

  LD: library not found for - introduction

  collect2: error: ld returned 1 exit status

  The code itself is nice, he ran into another computer with no problems.

  First gcc had manually, the problem, installed and then uninstalled and installed with homebrew and still have the problem. How can I fix?

  (Have the 5.1.0 version of gcc)

  Okay, so nobody has responded, but I found a solution. This is the version of gcc, apparently more recent versions have this bug, one that works and compiles the codes is the 4.9 version, in case it would be useful to someone.

• HP Deskjet 3050 (J610a) won't scan - printer not found

  This fine all worked until I had to get a new router and I can scan after you have reinstalled the HP 3050 wireless printer is no longer on my computer. It is worth noting that on my other computer, there has been properly installed on Vista and I can scan and print normally.

  When I click on the scanning software HP on the desktop or in the program menu it shows an error window saying "HP Deskjet 3050 J610 series is not found"

  I ran the HP scan diagnostic software and he said just that no scanner are installed. But I installed the software from the CD, I did the first time I got the printer and I did something different this time when I changed the router then why didn't he scan?

  Can anyone help?

  All sorted.

  The problem was that I had installed the drivers of BASE and not the FULL software.

  Silly me!

  But it could help other users in the future. Uninstall, and then download and install the FULL software and everything should work fine.

• HP Laser Jet MFP M125 NW Pro: THE HP Previously 125126 scan is not found

  After forcing ugraded to Windows 10 I find now that I can't use the ease of the scan on the printer above.  When I get the HP doctor to check everything going through the different steps through Windows and then I am asked to do an analysis of test - when I select what I get a message saying THE Previously 125126 scan HP was not found.  If I skip this step and go to the next option, I find myself at the beginning.

  As a senior try my best stay on top of things I find it very very frustrating.

  Any help will be appreciated, thanks

  Hi @Peregrini,

  Thanks for joining the Forums of HP Support for a solution to your problem of scan.

  I have undersatnd that you have upgraded to Windows 10 and since then have not been able to scan with your M125nw of MFP HP LaserJet Pro. I would like to help.

  It's definitely a software problem. I would start by uninstalling any printer related software by following the steps described in this document of support - uninstalling the software of the printer (Windows).

  If you get prompted to restart the PC when uninstalling, restart the PC. If get you invited to restart, restart the PC once uninstallation is complete.

  Then I would download and install version 10 of Windows of the HP LaserJet Pro MFP M125/126 full series software and drivers. You can go to the Web page for download by clicking here.

  Once installation is complete, you should be able to start a new search. Here is a support document which can serve as a reference if necessary - scanning the computer HP Scan (Windows).

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• scanned my pc of the virus-not found

  scanned my pc for viruses-not found, but pc is running very slowly

  I continue to receive advice from my pc is infected and said "click here."   Him did not.  Need help.

  Looks like you have rogue malware (malicious software posing as something good, but it's obviously not!). Give us the COMPLETE messages that see you. Then, we can help you with the specific removal instructions. Here is an example:

  http://www.bleepingcomputer.com/virus-removal/remove-XP-anti-virus-2013

• OfficeJet Pro scan 8610: 8610 computer software not found

  Hi - I have a fairly new Officejet Pro 8610 and it uses a wireless network with a MacBook Pro. Wireless printing function works perfectly; and, as a first step, the it function analysis did too. Without apparent reason, has now ceased to work, and every time I try to activate using the HP app, I get an error message indicating that the required software/driver is not found on the computer. However, I re-downloaded and installed the driver full value several times on the site of HP (no effect). The computer always communicate perfectly with the printer, and I'm able to activate the scan through the Mac system preferences function.

  Any help gratefully received...

  Hey @pleigh20,

  Welcome to the HP forums!

  I see that you have problems with your Officejet Pro 8610 scanning your Mac 10.9. I can help you with that.

  Given that you have a problem scanning I want to make sure that the printer is plugged directly into a wall outlet and not a surge protector. Once this is done, we will do everything that follows.

  1. On your Mac, go to Applications.
  2. Open your Hewlett-Packard folder.
  3. Run Uninstall HP if it is present.
  4. Go to Applications and utilities.
  5. Open disk utility.
  6. Click "Macintosh HD" on the left.
  7. Click on verify disk permissions. It will take about ten minutes.
  8. Click on repair disk permissions. It will take about ten minutes.
  9. Restart your Mac.
  10. Go to your Apple icon and the software updates. Download the updates that are found.
  11. Download and run the HP Installer (if you need the link you can click here).
  12. Try scanning.

  I would like to know if it works for you. If it's not please let me know what happened and I will be able to help you further. Even if it solves all please let know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a great weekend!

• HP6520: HP, software not found on my computer scan

  Hi - I downloaded the latest update of the software for this printer on my Mac.  When I restart both devices and connect my mac to my printer, I can't edit task analysis as the error message "software HP Scan, which is required to view and edit tasks scanning, not found on this computer. To download and install the latest software of HP scanning for your device, visit http://www.hp.com/support. »

  How can I get this software on the best of my knowledge, I downloaded the all-in-one software for this machine, which should include the scanning software.

  I am able to scan to the Mac using the touch screen of the printer but it records the individual pages as JPEG files and I want to be able to save several pages in the same file, just as I do in Windows.

  I appreciate your help in advance

  Hi @coffindodger and welcome to the Forums of HP!

  I understand that you are having problems using your scanning software. I would like to help with that!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend you to reinstall HP Photosmart 6520 e-all-in-one of the printer drivers.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Can not scan to my MacBook Pro from my Deskjet 3050 a mistake: machine not found.

  Hello

  I need help. I just plugged in and installed the software for my deskjet 3050 a yesterday. All print and eprinting functions work fine, however, the option scan says: "not found computer. Make sure that the HP software has been installed on the computer. "I don't know what to do from here. I use it on my wifi connection. However, I also tried with the printer plugged into my MacBook Pro directly. I am running the most recent update. (not sure of the number). Please notify.

  Thank you!

  Hi stewcf,

  Thank you for your quick response!

  To see how to scan in your 10.7 system just click here. I realize account as the said document to 10.8 but the steps would be the same for your system 10.7.

  If scanning your Mac works without error, I would try you power cycling of the network.

  To do this, I would like that you completely turn off your Mac and your printer. Once they are off, go to your router, pull out the power cord on the back for 30 seconds. Once 30 seconds have elapsed, plug the router in and wait for the lights to return to normal (this may take up to 5 minutes). Once the router is back please turn your Mac back on your printer and then once everything is set, please try again the analysis of the front of the printer.

  I would like to know how everything goes!

• Scan HP: HP Officejet 6500 E710n-z not found

  My printer and fax works fine, but since the time, I can't scan anymore. By clicking on the icon of the Bureau analyzes the message "scanning HP: HP Officejet 6500 E710n-z not found". "." The Wi - Fi connection is ok because the printer works fine.

  If anyone can help?

  TX bonvreno

  Thank you bonvreno,

  Complete the following steps to solve the problem and get rid of multiple entries in Device Manager.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer.

  I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer. My computer print very well so I do not know why it does not scan.

  Hello

  Thanks for the information. Two things to try. First of all, try to align your print cartridges using the controls on the printer display panel. As part of this process, the printer will print on a sheet of alignment that you place on the printer and scan in the printer. See if it works successfully. If not, see the following page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02451000&cc=us&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0011 .

  The second thing to try is the print and Scan Doctor Utility, download here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-114642-1&cc=us&dlc=en&lc=en&os=4063&product=5061082&sw_lang=. Its a standalone process and requires no explanation.

  Let me know if one of them fixes the problem.

  Kind regards

  BearPup

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• Since I use photoshop CC I've not found an easy way to scan by using the discreen function? help please

  Since I use photoshop CC I have not found a way to use the discreen function when you scan... help!

  discreen function?

• Cannot install Acrobat form cs6 diskete: I get this error: Exit Code: 6 - ARKSelector.dylib not found in/Library/Application Support / Adobe / deco

  How one work around this error when I try to install Acrobat form CS - 6 Design & Web Premium CD on my Mac air?

  Exit code: 6 - ARKSelector.dylib not found in/Library/Application Support / Adobe / deco

  Help!

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Mylenium