I can no longer add items to my calendar

Similar Questions

• Can no longer add ESXi host to vCenter but OK VI Client connects

  I removed an ESXi host in a cluster on vCenter. Now when I try to add the host (whether for the cluster or stand-alone) the add hosts Wizard appears and has the correct information, but when I cliquerai on closing, that nothing happens for a few minutes, then I get the error:

  Unable to reach the specified host... Maybe it's because this host is not available on the network, there is a problem with the network configuration or management on the host services do not react.

  However, I can connect to the host directly with the VI client and which works very well, even though the events tab displays "VFAT: 2583: Possible FAT Corruption." My copy of ESXi is on a flashdrive in a HP Blade.

  I tried to reboot the host, but it makes no difference. Several of the responses to other users of similar problems is recommended to perform "service vmware-vpxa restart" on the host, but this does not apply to ESXi. I also tried to restart the vCenter, but that makes no difference either.

  Any ideas?

  Thank you

  Will be

  Download iso hpvm-recovery on HP site and reinstall ESXi on flash drive.

  UPD: Yes, as Neil said, check your key USB HP if you bought ESXi Embedded. If you have the Green key aluminum, require the replacement of HP. And then, you definitely have to download iso that I mentioned above

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• When you add items to a project can then remove the clips?  I'm trying to free up space on my hard drive. Thank you.

  When you add items to a project can then remove the clips?  I'm trying to free up space on my hard drive. Thank you.

  Not while you're still editing the project.  When you have completed the project and shared it and are sure that you do not want to do any editing more far, you can delete the whole project.

  If you do a significant amount of iMovie editing you really need to put your libray (ies) on a large external hard drive.  Another thing you can do is to divide your work between different libraries and move those that are not currently on a removable drive.

  Geoff.

• How can I add items to the Menu of the button lock, I don't, change user, close and lock. I want to add 'restart '.

  How can I add items to the Menu of the button lock, I don't, change user, close and lock. I want to add 'restart '.

  How can I add items to the Menu of the button lock, I don't, change user, close and lock. I want to add 'restart '.

  This tutorial should do what you want. Use method 2.
  http://www.Vistax64.com/tutorials/105003-shutdown-options-start-menu.html

  Please read all notes caefully, not only the parts of the statement.

  t-4-2

• Hello. I have Lightroom 3. The only addition I've ever done is to add a plugin of double Finder several years ago. No, all of a sudden I can no longer download photos as usual. I need to deceive Lightroom by downloading by adding new files into folders an

  Hello. I have Lightroom 3. The only addition I've ever done is to add a plugin of double Finder several years ago. No, all of a sudden I can no longer download photos as usual. I need to deceive Lightroom by downloading by adding new files into folders and then synchronize these folders. But lately this work around is not no longer works. Is the program, forcing me to upgrade? Can I continue to use this version. I need to reset something. Please help because it is very frustrating.
  Thank you!
  Emily

  PDF, GIF and BMP are not the types of files supported for Lightroom.

  See here: help Lightroom | Supported file formats

  However, there is a plugin available that will allow you at least these files from the catalog, it is called Anyfile: any Lightroom Plugin file

  Bruce

• How can you add item (object) complex "nested table"?

  Hello I did some reading on * "Associative" * and * "Nested Table" * and I would like to enumerate the collection using the later version (http://www.devshed.com/c/a/Oracle/Database-Interaction-with-PLSQL-Nested-Tables/2/)
  -know list "Nested Table"
  
  However, encountered problem try to * 'EXTEND' * my nested table (add items to the complex type or OBJECT I defined, namely 'TmpHierarchyMapObjType' below) - detail as follows:
  
  -NOTE 1: Here's how to create the type object (be well if I just say "CREATE or REPLACE TYPE TmpHierarchyMapObjType AS OBJECT (_TMP_HIERACHICAL. ROWTYPE_)"instead of having to duplicate the column definition.
  CREATE OR REPLACE TYPE TmpHierarchyMapObjType AS OBJECT
  (
  ID numeric (19.0),.
  ParentId numeric (19.0),.
  ChildId numeric (19.0),.
  ...
  TmpUID varchar2 (32),
  ReferencedId numeric (19.0),.
  ...
  );
  
  -NOTE 2: I can't put 'TmpHierarchyMapObjType' inside the package, but it's not crucial, I guess.
  Types of CREATE or REPLACE PACKAGE
  AS
  TYPE cursorType IS REF CURSOR;
  TYPE TmpHiearchyMapTableType IS TABLE OF THE TmpHierarchyMapObjType; / * Use 'Nested Table' instead of an associative array * /.
  / * TYPE TmpHiearchyMapTableType IS TABLE OF THE TMP_HIERARCHYMAP % ROWTYPE INDEX DIRECTORY. */
  END;
  
  -NOTE 3: Here is my FUNCTION TABLE that now returns a "Nested Table" as assumed to 'Associative' (with a syntax different enumeration)
  FUNCTION to CREATE or REPLACE spGetParentsTable
  (
  Number to the ObjectId,
  ObjectClassifier varchar2
  )
  RETURN types . TmpHiearchyMapTableType -now a 'Nested Table', not 'voluntary '.
  IS
  Types of TmpHierarchyMap. TmpHiearchyMapTableType;
  ThisTempId varchar2 (32);
  CURSOR spGetParents_cursor IS
  SELECT
  ReferencedId Id,
  ParentId,
  ChildId,
  ...
  OF TMP_HIERARCHYMAP
  WHERE TmpUID = ThisTempId;
  BEGIN
  SELECT sys_guid() IN the double ThisTempId;
  
  spRecursiveGetParents (ObjectId, ObjectClassifier, ThisTempId);
  
  -(Commentary) TmpHierarchyMapMAX: = 0;
  FOR oMap in spGetParents_cursor LOOP
  -(Commented out) TmpHierarchyMapMAX: = TmpHierarchyMapMAX + 1;
  
  -QUESTION: FAILED here! How can I add/elements of complex types?
  TmpHierarchyMap.EXTEND (cast (oMap as TmpHierarchyMapObjType));
  
  /*
  NOTE: (In the comment) use is not "Associative", now using "nested table" instead.
  TmpHierarchyMap (TmpHierarchyMapMAX). ID: = oMap.Id;
  TmpHierarchyMap (TmpHierarchyMapMAX). ParentId: = oMap.ParentId;
  TmpHierarchyMap (TmpHierarchyMapMAX). ChildId: = oMap.ChildId;
  ...
  */
  END LOOP;
  
  DELETE FROM TMP_HIERARCHYMAP WHERE TmpUID = ThisTempId;
  
  RETURN TmpHierarchyMap;
  
  END spGetParentsTable;
  
  -Finally, I would like to enumerate the nested table.
  DECLARE
  types of oMappingTable. TmpHiearchyMapTableType;
  BEGIN
  
  oMappingTable: = spGetParentsTable(2,'ThinkFundamentals.Util.Security.SystemUser');
  
  -NOTE 4: this is my final goal!
  Select * from table (cast (oMappingtable as types.) TmpHiearchyMapTableType));
  
  dbms_output.put_line ('done!');
  END;
  
  
  REF:
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14261/Collections.htm#LNPLS005
  http://www.DevShed.com/c/a/Oracle/associative-arrays-in-Oracle-PLSQL-introduction/2/
  http://www.DevShed.com/c/a/Oracle/database-interaction-with-PLSQL-nested-tables/2/

  Hello

  Try this,

  TmpHierarchyMap.Extend();
  TmpHierarchyMap(TmpHierarchyMap.Count) := TmpHierarchyMapObjType( oMap.Id
                                                                  , oMap.ParentId
                                                                  , ... );
  

  Kind regards

  Christian Balz

• I can't stop adds popping up. The settings changed as you advise.

  The adds are not pop up on google

  These ads appear to be associated with Web sites that you are using, or they appear anytime, anywhere, anytime, seemingly without rhyme or reason?

  A possible cause of unwanted ads is a bad add-on. Here's my method to track down and clean up bad Add - ons and other ad injectors. Sorry for the length - it is not as bad as it sounds:

  (1) open the Control Panel, uninstall a program. After the loading of the list, click on the column heading "installed on" to group infections, I mean additions by date. This can help the undisclosed items bundle smoker who snuck out with some software, you have agreed to install. Out as much garbage as possible here.

  (2) open Firefox page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Set essential and unrecognized plugins 'never enable '.

  In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

  (3) you can search the rest of problems with scanning/cleaning tools listed in our technical support article: Troubleshooting Firefox problems caused by malware. These scanners on request are free and take a long time to run. If they end quickly, especially if they require the payment you have a serious infection. I suggest the specialty forums listed in the article in this case.

  Success?

• CS6 AE does not allow me to add items to the timeline

  V11.04.2 AE CS6 / Mac OS10.8.5

  Working in a new publication, I can only add 1 point to the timeline. After that it is no longer allows me to drag anything to the timeline.

  This is after several previous accidents that happened while making minor changes to the items in the timeline panel.

  Your screenshot shows the film Panel and not the composition Panel. You can't drag additional items in the footage Panel. I think that this is your problem. What happens when you drag additional items to the timeline? What happens when you open the composition Panel?

• can I still add to apple care if the warranty has expired?

  can I still add to apple care if the warranty has expired?

  No, if it is out of warranty, if it is for a Mac: http://www.apple.com/support/products/mac.html

  The AppleCare Protection Plan can be purchased as long as your Mac is still covered by the limited warranty of one year.

• With the 3.6.3 version I can no longer do a right-click with the mouse and check the properties of a direct url link on web pages

  Windows XP Pro, SP3. Firefox 3.6.3. Since the update to this version a few weeks ago, that I can no longer do a right-click of the mouse and check the properties of an active url link on Web pages. I've always had the option before. I want this feature back!

  This add-on restores the functionality of properties: https://addons.mozilla.org/en-US/firefox/addon/14228/

• Add items to the combo box when running

  In my program, I want to add int '34' "43", "17"... and let the user choose one of them to the drop-down list box. How can I add items to the combo box when running. Create a property node 'String [] '? I try that, but its screen is "3443". I want to display as "34".

  43

  17

  See attached extract

  

• Cannot add items to the windows DVD creation

  When you open dvd maker-go ot add photos and video - click on add items - find and select the file, and then click Add - this is where the problem is - it needs a file name to be added, but nothing seems to work-can of a help me

  I ran sfc/scannow - he went up to 100%

  Impossible to get findstr to work

  also tried to disable and re capable creation of dvd in step 2

  Windows dvd creation is not listed in the list of the items that appear on the screen

  I'm lost

• Error message "Windows can't open add printer." The local print spooler service is not running. Please restat the spooler or restart the machine. "while trying to add printers in Windows 7

  Original title: my laptop has lost all printers and windows & no longer recognizes them. Help! I can't print anything

  I use my laptop computer in a docking station.  I took it out to take for a trip and when I got home I plugged it back (as I always do).  Just before the trip, I have upgraded to Windows 7 and all my printers were working very well.  When I got home and pluged again, Windows does not recognize one of my printers.  When I try to add printers a say8ing error message "Windows can't open add printer."  The local print spooler service is not running.  Please restat the spooler or restart the machine. "I tried to restart and turn off the printer, etc.  Can someone help me?

  Hi RobynGP,
   
  This may occur if the print spooler requires other services, and these services are not running. To resolve this issue, follow these steps:
   
  1. in Services, right-click on print spooler and then click Properties.
  
  2. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.
  
  3 make a note of each service, click OK, and restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.
   
  Let us know if this helped.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• After the installation of Windows Live Movie Maker, I can no longer connect to the MS Community

  Original title: suddenly I can not connect to the Microsoft Community

  I present this post on a second computer.  Up to a few hours, after I installed Windows Live Movie Maker, I can no longer connect to the Community MS on my other PC.  When I click on 'Sign In' to the MS Community Home Page, I get only a blank, even if his tab page says "connect to your Microsoft account.

  I think the problem is in IE because I can sign correctly using Chrome or Firefox.

  Can someone shed some light on this problem and we hope to provide a solution?

  I have a similar problem on this computer and I am trying to solve the problem. I managed to connect to the Microsoft Community forums by opening Internet Explorer InPrivate browsing. This is only a workaround until I have solve the underlying problem.

  PIN Internet Explorer in your taskbar, do a right click on the new icon in the taskbar and select start InPrivate browsing. You can then enter the web address of the Microsoft Community and it should open the community forum. If you click on connect, you will be presented with the Login Page. Unfortunately, please follow this procedure complicated, whenever you want to connect to the community.

  On this computer I can connect to other services that require registration to the Microsoft Account for example TechNet. The problem is only with the Microsoft Community forums.  What version of IE are you using?

  A suggestion if you are using Internet Explorer 9, 10 or 11.

  Access your profile. Make sure that you have connected. Click all Threads, click on the star to the top right of the screen (you need to press F11 to see if you're reading full screen), click the scroll right to add it to Favorites, and then select Add to Favorites bar. Change the long name for something memorable, and you can immediately access your son in your Internet Explorer Home Page.

• I can not longer right click my desktop or in a folder and get a new Forlder.

  I am running Windows 7 and I can not longer right click my desktop or in a folder and get a new Forlder.  My only option is a "new compressed folder (zip file)" the only thing I added to my computer (that I know) is Norton Internet Security.

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf
   
   
  I do not think Norton is responsible for this, but it's quite the security program user-friendly Windows less you could choose and often causes other issues.