I can not adjust the size of the sliders on the right side of the screen

Similar Questions

• Re: Satellite L855 and Windows 8 - can't adjust the screen brightness

  Hello world!

  I installed Windows 8 on my L855 Satellite and it is running pretty well except that I can not adjust the screen brightness. I have updated all drivers for win 8, but it does not solve the problem.

  Hope someone can help me! Thank you!!

  Can you do this using the settings in some diet plan?

• Help, please! using old 'new' gateway XP... .with garage Pen... Can NOT get the screen brightness went from "dark".

  Although I read "help" information about the stylus and Tablet section...

  Adjust the brightness of the screen on your Tablet PC

  To adjust the brightness of the display on your Tablet PC

  1. In Control Panel, open Tablet and pen settings.

  2. Tap the view tab.

  3. Under the brightness of the display, in thesettings list, tap the name of the power management to your settings to apply.

  4. To make the screen darker or brighter, drag the slider to the left or to the right.

  5. Press OK.

  Notes

  • You can save battery power to turn down the brightness of the screen on your tablet PC.

  • To open Tablet and pen in Control Panel settings, double-click the icon change the stylus and tablet settings in the notification area of the Windows taskbar.

    
    

    THE BRIGHTNESS OF THE SCREEN WON'T... DON'T HIGHLIGHT...

    SO I CAN'T ADJUST THE SCREEN BRIGHTNESS...

    
    

    ... ANY SUGGESTION IS APPRECIATED... Thank you!!! ... YOURS, KATE

  
  

  • What you have already tried to solve the problem

  Hi Kate1428,

  · You are able to change power options?

  · You have a hardware power buttons to adjust brightness?

  · What is the service pack on your computer?

  1. create another level of power and check if the problem still persists. Link, please refer to: in Windows XP power management:http://www.microsoft.com/windowsxp/using/setup/learnmore/russel_02march25.mspx

  2. update to the latest graphics card driver and check the results.

  You can check the link below:

  How to manage devices in Windows XP:http://support.microsoft.com/kb/283658

  Another link for reference: manage your Tablet PC battery Power:http://www.microsoft.com/windowsxp/using/tabletpc/learnmore/managepower.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WIN8: Can I adjust the screen resolution by a notification area icon?

  I have a compressed HPEnvy X 2 running Win8. I connect it to a projector of data via a HDMI/VGA adapter. In order to get the projector to display properly, I have to change the screen resolution of salvation to the lowest. I pinned control panel display icon on the desktop to make this need more quickly, but it is yet to click in it, select res screen adjust etc. Is it possible to have an icon in the Notification area that will put in place the 2 resolutions and I would change it in a single click? Moreover, the system displays for the data projector, but says that it cannot find a second screen, so I don't think that I can set permanently hi res for the main and weak wreck for the 2nd monitor

  Hi Max,.

  Area the notification provides notifications and status. Well-designed programs use the appropriately, without being annoying or distracting notification area. You can not adjust the resolution of the screen to a notification area.

  I suggest you try the steps from the following link how to change the resolution of the screen on Windows 8.0

  Get the best display on your monitor (set your monitor to its native resolution)

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Equium A100-027: can not get the screen turns off automatically in Vista

  Hello

  Got one of the new A100-027 of the load with Vista a couple of weeks. I can't get the screen to stop automatically when the appliance is left unattended. Standard windows screen saver or power options makes no difference. The screen is always on when I get back to the schedule of the machine later, I don t want to put a 'sleep' mode because the machine is internet access.

  In desperation I changed the option to close the display does not go into mode 'sleep', but it would be nice if the screen would make her s auto off, instead of having to close the screen every time.

  Thank you very much
  Chris

  A bit of an update, I found the screen stops automatically in normal conditions. But then, I leave the computer running a program of file sharing peer-to-peer on the net that he will not cut the screen down. Even minimize the program doesn t allow the screen to close.

• I can not adjust the size of the window for Firefox on OSX 20 after update

  After updating to the latest version of FF, I can no longer adjust the size of the window. I tried to click and drag the four corners of the window, but it remains the same size. Before the update I could adjust the size of the window. I tried rooting around in the topic: configuration settings but have not been able to find something that would determine the size of the window being locked to certain dimensions. I have also reset firefox to its default settings and this does not resolve the issue.

  Execution of OS x 10.6.8 with Firefox 20.0

  Try to disable the use of Firefox graphics acceleration hardware.

  You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Firefox menu > Preferences > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  If you restart Firefox, the problem is solved?

  See also: starting today, Firefox windows is more scaleable. OS x 10.6.8 Firefox 20.0

• Can not adjust the size of the rack front panel

  For some time I open LabView, went today and first thing I tried to do was to adjust the grid size of façade to something smaller. Hit ok and nothing happened.

  I can turn the grid on and outside, or replace the points or lines, but the size is always the default 12 px value. Someone at - he meets this or know of a fix?

  LabVIEW 2009 SP1

  Hi StevenD, have you followed the steps in adjusting the size of grid alignment for the current VI? I don't see the error here. Is this reproducible error if you close and then reopen the LabVIEW?

• Can not adjust the volume of the music unless the piece is played

  Hey people,

  I noticed that when you use Spotify and Pandora, by pressing the volume buttons on iPhone adjusts system volume if a song does not play. Once a song begins to play the volume buttons to adjust the volume of the music. If the volume came to be turned up really loud the last time that the application has been used, you start to play the song at full volume to lower. Any ideas if this can be fixed? It would be nice if the volume buttons would change the volume of the music whenever you are in the application at all, not once a song begins to play.

  Thank you

  Owen

  Hi osmithy,

  Thank you for using communities Support from Apple!

  I understand that when you do not listen to music, and you set the volume on your iPhone, it adjusts the volume of the system as you say, but when music plays, the volume buttons to adjust volume of the song.

  This is the expected behavior and works as expected. This information can be found in the following link.

  When you are on the phone or listening to songs, movies or other media, the buttons on the side of the iPhone set the audio volume. Otherwise, the buttons control the volume of the ringer, alerts and other sound effects.

  Volume controls - iPhone

  Best!

• Can not adjust the volume control

  I have no sound on my computer. When I go into Control Panel, volume control, it I cannot adjust the volume control. I have my computer set up for automatic downloads of microsoft, so I can't tell what I recently downloaded.

  When in Windows volume controls do not work, it usually means the underlying Windows application that control audio is corrupted. You need to retrieve sndvol32.exe is your partition recovery or recovery disc that came with your computer. The process for this varies slightly, but full instructions about recovering Windows volume are available on this tutorial.

• Can not adjust the volume unless I go to control panel - volume icon missing

  My volume icons disappeared from the notification (lower-right) area and I can't adjust my volume levels of my office (I have to go to the control panel every time).  When I right click to change the properties of the notification bar, the box next to volume under the "always show icon" is not Hi-limited and will not let me choose to always display of the volume icon.  What can I do else?

  This has been known to solve the problem for some. No guarantee, but it is safe and it is much much easier than this... just print first, then follow the instructions. Takes two minutes :)

  http://www.howtogeek.com/HOWTO/Windows-Vista/clean-up-past-notification-icons-in-Windows-Vista/

  If you're still having problems, then a system restore might be interesting to try.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  You did the changes to the computer like installing new software, etc.?

• monitor the screens out of reach - can not get the screen to display the appropriate size (its currently large)

  Please help, I'm at my wits end!

  It looks like a video driver issue.

  Go to the Control Panel, Manager of devices, select the monitor and the graphics card, then, click on the arrow just to the left of each, to select the item that appears in the selected entry is.  Note all the warnings on its icon.  Select, click right, update the drivers.  Maybe that's all you need.

  If it is unlikely to need any adjustments, go to control panel, display, change display settings, change the Advanced display settings.  In the dialog box that appears, one of the tabs will be known as the graphics card itself.  Look through each setting & just advanced setting to check there is nothing strange here which allows you to set the display to a too big size.

  If that doesn't resolve it, go to the manufacturer's support site & download the latest graphics card driver.  Check the installation instructions - it can tell you that he will make the Device Manager procedure you did above or she might tell you to go to the control panel to do it manually.

  Furthermore, using the sleep mode will make your computer no harm at all.

• Help! Can not adjust the calendar using the timeline

  I have captivate 2... everything is a little 'offbeat' when I click on things to do something to captivate. But in addition to that, if I place a bitmap on the blade I used to be able to adjust the timing of the bitmap just by extending on the timeling. I can't do now what I am doing wrong?
  
  Thanks in advance!

  Thanks for the comments. I ended up calling the technical support due to the problem of 'delay' I had. This issue has proved to be a .dat file that is corrupted. Then we addressed the issue of the chronology of resizing and it works very well on a new file, but not the one I work in. Thus, we concluded that this problem is actually a piece of corrupted data.

• can not get the screen to normal size

  Okay, so I think that I did by messing around with the ease of access, but my screen is all magnifyed and blown upward and just to big... ive tried to look through everything... How to get back my computer to original size screen?

  Hello

  You need to maybe uninstall and reinstall the graphics card. However, before first try to change the screen resolution and other settings and check if that helps.

  Get the best display on your monitor
  
  http://windowshelp.Microsoft.com/Windows/en-in/help/617624ee-08f3-4AFF-9713-5e84a9674a261033.mspx

  Change the screen resolution
  
  http://windowshelp.Microsoft.com/Windows/en-in/help/0386b009-5F30-45c7-80c8-ff0395cc24091033.mspx

  If the links above do not help, then follow uninstall and reinstall procedure.

  To uninstall and reinstall the graphics card follow the steps below:

  1. Click Start, in the start search bar type Device Manager and then press ENTER.
  2. in Device Manager, you see listed adapter.
  3. right click on the graphics card and then click on uninstall.
  4 restart the computer after uninstalling. Once you restart the adapter will be automatically installed.

  If this does not help, you will need to do a system restore, click the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  
  http://support.Microsoft.com/kb/936212

  Restore the computer to a date or a point when the problem did not exist.

  I hope this helps.

  Peace be upon U.

• lost the sound can not adjust the volume in windows xp

  I deleted items recycle and some of the add and remove, after I couldn't get sound of computer or cannot restore my computer to an earlier date, what should I do?

  Hello
   
  1 are you facing this problem with a particular application or with the sounds of the entire system?
   
  2. do you see a red x on the audio icon on the bottom of the right hand of the screen?
   
  3. what was recent hardware or software changes made to the computer before the show?

  Please follow steps 1-3, including all stages of void by order and check if you can hear the sound.
  
  Method 1
  
  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  
  Method 2

  You can also run automated troubleshooting and check if it helps.

   

  Diagnose and solve the problems of Windows audio playback automatically
  

   

  http://support.Microsoft.com/mats/AudioPlayback/

  See also,

  No sound in Windows
   
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   
   
  I hope this helps.

• Can not adjust the volume with the Fn keys

  Hello people,

  I have an Aspire laptop 5733Z and I love her dearly.  Recently, I lost the ability to adjust the volume using the Fn key keyboard shortcut with upward or down arrow keys.  I have uninstalled and installed the Realtek HD driver.  I called technicians to Answersby.com and they couldn't help.  Did anyone out there has had this problem and is there a solution.  Thank you for your assitance on it.  Ron

  [subject line changed to reflect the new topic]

  Thank you very much!  who did the trick!  Kudo!  It doesn't seem to be "* beep * island" now and goes off often.  Fix is quick and easy to make as needed.  Thanks for your help.  good luck finding a job.  Ron

• WIndows 7 - can not lower the screen resolution

  I don't know when it happened... apparently, after one of the windows updates because it worked very well, a month or two ago... anyway, here's my problem. A month ago I got the Sims 3 World Adeventures. I installed it and he played wonderfully. I have themselves are involved in the Facebook games and he has not played for a few weeks, but recently decided to go back to the Sims 3. I clicked the shortcut, open Launcher, I clicked on play and my screen went black, then white, then gray, then horizontal strips of red, green and blue, I think that the colors are then complete blue (like the blue BSOD) then he began again, black, white etc. I could alt tab out after a few minutes.  No error message, no beeps and the computer wasn't warm because I had just started before trying to play.

  I'm running on an Acer Aspite Z5600 with touchscreen (its an all-in-one... looks like a monitor etc), Windows Home Premium, 3 gig of ram, op 64 bit, Pentium system dual core, Intel G45/G43 Express chipset. I went to check my graphics settings - the resolution is set in 1920 x 1080 monitor shows a built-in display. I thought that maybe the resolution was causing problems because the Sims 3 do not like this high middle (I never changed it and the game worked before but I thought of one another program may have) when I put the lower resolution and hit apply I had the same changes in strange black on white, etc.. Yet once again, I had to alt tab out... it took forever to do, and my resolution had not changed.  Everything else seems to work fine... my browser and other... I can play some Facebook games and it seems pretty much any game that starts in a window / windowed mode. I changed the settings on the Sims 3 to play in windowed mode and it starts very well (I HATE the windowed mode tho) I decided to do some research and see if I could find a solution later and decided to go play another game, (one of the verizon games I had played before without problem) and he did the same thing as Sims 3 dang. It is a demand pretty weak game graphics-wise (his Poppit to go - even my old laptop can play it.) so having unplayable all of a sudden he had me beat. Color changes look almost like a kind of graphical test. Hope I have not confused LOL thanks everybody for any help.

  I have a reversible temporary solution of 10 steps for this problem, im also using a race of z5600 acer windows 7 and when I try to run anything that changes the resolution of the screen the screen turns black and flashes different colors is a way around this, but you will not be able to use the full screen , and when your done with the game or whatever you will be able to use the full screen new heres how

  1. start

  2 right click computer

  3. click on properties

  4. click on Device Manager

  5. If Conrtol user account appears, click Yes

  6. click on the tab display cards

  7. right click Intel G45/43 Express Chipset

  8. click on turn off

  9. now the display begins to blink and you'll notice that sub-par signifigantly window, you only 3 options for screen resolution size but most of the games will take place and you will be able to see

  10. to make the fullscreen back you will need to follow the same steps as above, then click Activate

  Hope that this help is the only way it would work for me ~ JUZTICE