I can not get Diablo 2 to run on windows 7

Similar Questions

• Can not get the printer to work under Windows

  I have a Brother Laser printer and a Canon ip8500 printer.  I tried to get one to run Windows XP Professional.  This week I installed the Hello printer software and it finds my printers but then I get this message "sharing is not supported for this type of printer.  When I click on settings in VMware, disabled the said printer icon.  If I close Windows and click on settings in VMware, the icon of the printer is enabled.  I'd appreciate it if someone could help me get one of my printers to work.  I must do something wrong and just can not understand.  I use VMware version 2 and Snow Leopard on my iMac.  Thank you.

  onemulligan wrote:

  I use Fusion 2.0 (116369) and a version of snow leopard 10.6.2 iMac.

  Fusion 2.0 (116369) is not compatible with Snow Leopard and you should spend at least VMware Fusion 2.0.6 (free upgrade) or VMware Fusion 3.0.1 (paid upgrade).

• How can I get my fitbit to run on windows 7

  I got a fitbit for my birthday and I'm having a difficult time downloading the software. Can anyone help me get this thing on a windows device 7.

  Your best source of help will probably be their support or their forum site in one of the following links:

  http://help.Fitbit.com/customer/portal/articles/176070-how-do-i-set-up-my-Fitbit-Tracker-on-a-PC-

  http://help.Fitbit.com/
  http://www.Fitbit.com/forums

• I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Hi everyone, this is my first post, also help on the post would be appreciated.

  I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Thanks in advance

  Newbie

  The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

  I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

  R

• Why I can not get the Norton Toolbar? In the menu, the add ons, extensions, it says Norton toolbar is inconsistent & disabled.

  I can not get the norton for 36 firefox toolbar. Have run Norton live update repeatedly. He updated of all good and applied a patch. When I go to the firefox menu > Modules > extensions, toolbar Norton is grayed out and says he is not compatible with firefox 36 and is disabled. Help! I need my Norton safe.

  Hi Cathie7372, according to Norton the latest version of the toolbar is compatible with firefox 36 is 2014.7.10.26 - your watch as 2014.7.10. 16...

  as norton distributes the updates themselves we are probably not able to help much - please contact norton support if you do not receive the last update, even after running liveupdate repeatedly. they should be able to help get their product to date.

• I have a new mac air and can not get the bookmark to be deleted in Safari.

  I have a new mac air and can not get the bookmark to be deleted in Safari.  It has default Favorites - I don't want to see them--when I right click and select Remove - I get this error message.

  You are using Safari with bookmarks, history, and imported passwords of Firefox. To change your Favorites, you must first keep or delete data from Firefox.

  When I click on "do not keep" nothing happens.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Preferences/com.apple.Safari.plist

  A right click or Ctrl-click on the line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Quit the application runs. Move selected item to the office, leaving the window open. Restart the application and test. If there is no change, leave again and place the item you back where he was, crushing the that may have been created in its place. If not, remove the item you moved. If possible, restore from a backup prior to the problem.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Can not NECC ProfileManager despite the Run area full path in quotation marks with - Switch Profile Manager. Try to copy the old profile to the new computer.

  Can not get ProfileManager to open, despite having followed closely RUN instructions in the HELP section, copy the old backup profile to new computer.

  This has happened

  Each time Firefox opened

  == I had to use a new computer because of the accident on the old.

  You don't need to run the Profile Manager to move your profile to a new PC, see this.
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• RandomGen elements, case structure nothing if it's false, while the loop passes iterations, can not get the values in table outside the structure of the case

  Hello!

  I tried to build a trigger that triggers a true value each 1000 milliseconds (from the first real);

  which real command structure box to a value of the randomNrGen of the sample and place it in a table.

  but I would like to USE this table and I can't do this beacause I can not get out of the structure of the case.

  AND:

  the while loop ignores samples; If you run the vi and look at the speed at which the table fills, ypu notice it is not periodic: the first few items are inserted at 1 second interval, but then it jumps one;

  would it be because of the wait time 1ms?

  1. How can I create a structure that does this:

  If set to True, it samples a value from Genesis at random and places it in the table

  OTHERWISE, it does NOTHING, without zeros sent to the table just waiting for the next true and only the values sampled at True remain in the table?

  2. How can I stop it pop samples (multiples of 1000 in my case)?

  In conclusion: I need to be able to take samples on the sample generator and store them in an array of 3d in a zig - zag (1.jpg) way, but able to think about it, we need to go beyond these two questions.

  Please ignore the meter.

  Please help me!

  TibiG wrote:

  Thanks, Crossrulz!

  This did not omit all values and it works fine.

  Is it possible to get information in a case without making use of the large loop?

  My program will become very complex (I need to synchronize a magnetometer and a stepper motor to make a 3d map of the magnetic field of the magnet) and I want to do everything as simple as possible.

  If there is a way to get information about a case structure, other tnan using registers with shift on the big loop, and you know it, please show me.

  Thank you!

  You could also use a Feedback node, just keep it out of the structure of the case.

• Webcam is displayed in devices and printers, but can not get turned on?

  Original title: webcam 270
  Webcam is displayed in devices and printers, but can not get turned on?

  Hello

  ·         What operating system do you use?

  ·         You're using a built-in or external webcam?

  ·         What is the brand and model of the webcam?

  ·         Were there recent changes made on the computer before the show?

  Method 1:

  I suggest you to check in Device Manager if you can detect the webcam. See the link below to open the Device Manager in windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

   

  Method 2:

  Try to update the drivers for the webcam from the manufacturing site and check if it works:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Use the hardware and devices Troubleshooter to fix the problem.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 4:

  I also suggest that you run the Microsoft fixit tool and check if that helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Can not get updates Windows 7, error code 646

  Windows updates fail almost always error code 646 today.

  Other error codes are application error 100, event id 1000 and mshtnl.dll (registry errors?)

  8 Windows Explorer has stopped working properly, running on windows 7

  There has been a change in the health of windows, event 42

  Here are some of my problems

  * original title - can not get updates, Windows 7 instead of 8 as its supposed to, registry errors *.

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why?

  I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why? Apparently my camera 'new' picture does not "see" the flash, must now the transmitter? Is there a Flash that work wirelessly with my canon 6 d?

  All remote flashes need a way to communicate with the camera.  They can be wired or wireless.  The wireless system can be optical or radio.

  The key is that there is nothing built in the 6 d to control a flash... If you need something to do this work.

  The 430EX II can be triggered via optical signal as a remote "slave" flash (430EX II cannot function as a mode of 'master' (aka 'Commander').)

  The method of Cannon to control the 430EX II is to use either:

  (a) a "Speedlite ST - E2 transmitter.

  (b) speedlite another able to work in "master" mode (and there's a long list... the 600EX / 600EX-RT, the 580EX II, and curiously the 90EX is actually able to perform a 'master').

  I recommend either the 600EX-RT (which would be the basis for additional units 600EX-RT in the future that would give you radio trigger) or find a 580EX II.  I probably spend on the 90EX and promote a ST - E2 if desired subject is a way to trigger the remote flash and don't actually want a flash.  The 90EX is not very powerful, so it is not particularly suitable as a stand-alone flash, unless you use it simply as a "fill" flash for close subjects.)

  There are also many 3rd party triggers, but the vast majority of them won't let you not use E - TTL (they would be "manual" only) and the units which support E - TTL will be too expensive to buy just a high flash range running as Commander.

• My phone fell, and I can not get Windows to start. The repair option will not work.

  Windows Vista restore

  My phone fell, and I can not get Windows to start.  The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?

  Have you had your laptop, checked by a technician?

  If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.

• How can I get my laptop to run jar files?

  How can I get my laptop to run jar files? I downloaded one and when I try to open will try using Windows media player, which does not recognize the jar files

  http://ostermiller.org/opening_jar_files.html

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• Can not get updates more (error Code 80080005)

  original title: can not get updates any longer

  Have not been able to get updates since January.  Get the error code 80080005, but there is no solution for it.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. Save the file on your desktop zip and extract the file:
     -Right-click on the file and select extract all...
     -Click Next when prompted for the Destination.

     Therefore, you should see a folder called AccessChk on your desktop.

  3. Open the folder AccessChk

  4. Hold the SHIFT key and right-click in the window.  Select "open here command prompt.

  5. A command prompt window should open a similar message:
     C:\Users\\Desktop\accesschk >

  6. Type the following command and press ENTER:
     "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
     Tip: You should be able to copy and paste the command into the command prompt.

  7. Close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. Double-click Accesschk.txt (text file), it should open Notepad.

  9. Copy and paste your results with a new question in the forum of Windows Update.  (Make sure that you write 0x80070005 in the subject).

  Reference1

  If this is not enough: -.

  1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
      
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
     SubInACL (SubInACL.exe)
     SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.

  2. Please, go to the desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.

  5. Copy the following commands, and then paste them into the opened Notepad window:
      
     off @echo
      
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
      
     @Echo =========================
     Completed @Echo.
     @Echo =========================
  
  @pause
• After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
• View the desktop and right click the reset.bat file, then choose "Run as Administrator".
• You will see a window of type BACK treatment.
   

NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.