iMovie 10.1.2 install not on El Capitan beta

Similar Questions

• Component of reading QuickTime MPEG 2 install not on El Capitan?

  To use MPEG Streamclip this morning on my Mac mini (El Capitan), I copied the component QT MPEG2 to my iMac (Yosemite) but I was unable to insert it in the HD/system/Library/QuickTime folder.

  I am simply a sign of the circular 'prohibition' and he had no dialogue asking me to authenticate as an administrator.

  Any ideas?

  The MPEG2 component is not necessary for the Mac, but it's by Streamclip. You can not install it in the operating system, Streamclip he died for you. You get the installer and Streamclip point to him.

• The update to Acrobat pro 9.9.5 install not on El Capitan

  Version 9 was working fine on my old iMac, with the latest updates, but I have problems, put it back on my new iMac (with El Capitan). It can be installed from the disc without any problems, but when I checked the updates and tried to install 9.5.5, it starts the process but then just installation gets stuck. (No movement on the blue bar at the end of an hour). I reinstalled the program from the disk again and tried again, but it's exactly the same thing. The core of the disc program works very well, but because updates are in part on security, I guess that it is not recommended. I would be very grateful for advice on how to solve this problem.

  HiDebbie Pullinger,

  Acrobat 9 is not compatible with OS X El Capitan. You can buy Adobe Acrobat DC that is compatible with OS X El Capitan. For more details, please see Adobe Document Cloud | Adobe Acrobat DC

• Installed is that el Capitan can not stop computer

  Hi, I installed OS X El Capitan on my MacBook Pro mid 2012 and then I couldn't stop my computer. So I just tried to install again and it says computer restarts but nothing happens. It was about 5 minutes already.

  I'm in reall trouble.

  Before when I had installed El Capitan, I went about safari, it says safari 9.0.3

  I don't know how to get out of this

  concerning

  PAB

  Press and hold the power button until the computer turns off. Wait about a minute. Then do the following:

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen. It will be slower than normal

  startup.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• No idea why the latest update of security for WindowsXP (KB2686509) install not on my computer?

  No idea why the latest update of security for WindowsXP (KB2686509) install not on my computer? Have tried many times, keeps on coming it was not installed.

  See the RESPONSE of two 2 messages in this thread-online http://answers.microsoft.com/thread/0deeacb6-115c-419d-ac37-03ff8927b79c

  Tip: Start with Christian script execution.

• set update not installed not message when I try to update

  set update not installed not message when I try to update (security update for Windows XP Edition Media Center Edition 2005 Update Rollup 2 X 86 (KB2619340)

  Hello

  1. What is the exact error message you get?
  2. You have installed Service pack 3 on the computer?

  If you have installed service pack 3, then I suggest you to download the update manually from this link and check if that helps:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28469

  Also check this link for more information:
  http://support.Microsoft.com/kb/906602

  It will be useful.

• Windows Vista "Windows Installer service could not be accessed. Windows can run in safe mode or Windows install not installed correctly. »

  * Title *.
  Windows Installer not properly installed

  We just bought a new Dell with Windows Vista.  I tried to download i-tunes and I get the following error: could not access the Windows Installer service.   Windows can run in safe mode or Windows install not installed correctly.  I am not running in safe mode it should be setup of windows.   I am trying to install iTunes 8.0.2 Windows Vista 64-bit.  I found the info to repair Windows XP, but nothing for Vista.  Any help would be GREATLY appreciated.  I'm so frustrated.  Thank you.

  Hi BradandKim,

  We will try to start the Windows Installer service and see if that helps.

  • Click Start orb
  • Right click on computerand then click Manage.
  • If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  • In the console tree, click Services and Applicationsand then click Services.
  • In the details pane, right-click Windows installand then click Start.

  Let us know if that fixes the problem.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Picture It 2000 install not I don't have IE5.

  I was wondering if there is anyway to ignore the part of Internet Explorer 5 during the installation of the software? Microsoft's patches out there that will work for this particular software to install.  It will install not I don't have IE5. I also tried compatibility mode, and it does not work unless I did something wrong.  Any help would be appreciated.  Thank you.

  Hi grungychick,

  Thank you for using answers Forum.

  Here is a link to some suggestions for solutions to your problem:

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.pictureit&tid=43964a6c-8239-4757-ad0d-f97aa510078b&cat=en_US_7dae7f49-ed43-433c-ab5c-ebf580261aa5&lang=en&cr=US&sloc=&p=1

  or here

  I don't think that you will be able to install IE5 on XP either.
  You may be able to find a package type 'several Internet explorer' from a supplier of software of third party.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I got a message "no audio device is installed", not its how I can solve this problem?

  I got a message "no audio device is installed", not its how I can solve this problem?
  Toshiba
  Windows Vista
  No 'audio, video controller, game' on Device Manager

  It seems that your audio driver is corrupted or does not.

  In this case, you need to reinstall your audio drivers...

  If you have a drivers and utility of your computer CD that you insert and reinstall your audio drivers... Otherwise, you will need to download it from Toshiba Web site... Contact Toshiba for the same Support,

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• I get windows install not installed correctly message and I tried everything 2 understand/can't download and install anything like microsoft fixit

  Windows install not installed correctly

  Hi, Itsme18wheels,

  Start > type CMD

  Right click on CMD and select run as administrator

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  You might your Windows Setup support replace missing or corrupt files

  New attempt to update.  If failure once again, download/install the latest program Windows installation (for your operating system):
  Windows6. 0-KB942288-v2-x 86.msu:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8483
  (Download and save it to your desktop, run it.)

  Reset.

  -Or-

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

• Windows install not installed

  I went to the Forum to see if I could get an answer, but nothing helped. I tried to stop and then restart the windows installation program, did not work. have you the sfc/scan did not work. always get the "windows install not installed correctly". What can we do?

  Hello Aebrew,

  Thank you for choosing Microsoft answers forums for Windows Vista.

  Here's what you can try:

  Step 1:

  First we will try to restart the Windows Installer service and see if that helps.

  1. click on Start orb

  2. right click on computer and then click on manage.

  3. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  4. in the console tree, click Services and Applications and then click Services.

  5. in the details pane, right-click Windows Installer, and then click Start.

  If this does not work, you can try to restart by following the steps below:

  1. click on START

  2. Type "cmd" (without the quotes). Right-click on the result (it only takes a)

  and select "Run as Administrator"

  * Close out of all open programs before you take the next steps

  3. in the command prompt, type "msiexec /Unregister" (without the quotation marks and with a space between msiexec and /Unregister)

  4. press on enter

  5. Type "msiexec/regserver" (without the quotation marks and with a gap of msiexec/regserver)

  6. press on enter

  7. Type "net stop msiserver" (without the quotation marks and with spaces between stops {and} net and msiserver, stop)

  8. press on enter

  9. Type "net start msiserver" (without the quotation marks and with spaces between the net and {} stops and msiserver)

  Step 3:

  Also try to use the Windows Installer CleanUp utility:

  http://support.Microsoft.com/kb/290301

  Step 4:

  If nothing works, I suggest you to run an online virus scan. See the link below to launch the scan:

  www.Safety.live.com

  Hope this information is useful.

  Thank you.

• Latest version of KB905866 will install not (error 80004005) automatically or manually

  Latest version of KB905866 will install not (error 80004005) automatically or manually.  I tried the regular and most aggressive FixIt for updates.  I also tried to do nothing works safe mode.  I also tried to block the startup applications and tried all th eproceures again no no is made.  At one point my event log indicated that this update is not supported with this computer (not the event log regular I received after most of the trials).  Any other ideas?  I am running Windows Vista Ultimate 32)

  0x80004005= unknown error - can occur due to programs/services to interfere in the background.

  Suggestion-

  • Do a clean boot and try to reinstall the update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  • Download the update manually and install it in a clean boot state.
   

• Vista... Windows install not installed correctly

  Im trying to unistall i tunes but get the message "Windows can run in safe mode or Windows install not installed correctly.  I does not work in safe mode so it must be windows install. »

  I'm updating i tunes to my I phone 4 but keep, the message "I don't have administrator privileges to do so. Apple told me that I need to uninstall the old version so the message above.

  Help, please... Jim

  Hi Jim,.

  • You are able to install and uninstall other programs on the computer with any error message?
  • Have you made changes to the computer recently before this problem started?

  Step 1

  You can check if the windows service install is set to automatic and started and change accordingly. After verification test to check if you can uninstall iTunes and reinstall. To do this, follow the steps below:

  1. Click Start.
  2. In the start search box type services.msc and press enter
  3. In the services window, do scroll down to Windows install.
  4. Right-click on it and click Properties.
  5. Check if the startup type is set to automatic, otherwise it is set to automatic.
  6. Click the Start button, this will start the installation of windows services.
  7. Click on apply and Ok.

  Step 2

  If the steps above do not help, you can unregister and re-register the windows service installed on your computer and check if that helps you solve the problem.

  To do this, follow these steps:
   
  a. click on the Start menu, click on run.
  (b) in the Open box, type msiexec /unreg and press ENTER.
  (c) in the Start menu, click run.
  (d) in the Open box, type msiexec/regserverand press ENTER.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "The windows service install not a not could be accessed."

  "The windows service install not a not could be accessed."  I get this error when you try to install and uninstall programs.  I tried everything on this forum and cannot repair.    I have tried to change the registry, the clean boot, change the settings for the installer to manual and start, creating another account to test, restore points, updates to the installer, the upgrade to install 4.5, ran the File Checker system, checked for viruses or malicious software, while for other programs that may block the installation program.  I don't know where to go from here.  Can someone please help?

  Looks like the only thing you haven't tried is pure install?

  I suspect that you have used in the past the Windows Installer Cleanup utility, was as deeply in the past before this problem occurs?  The reason I ask is that Microsoft has just withdrawn this service program.

  Microsoft withdrew the Windows Installer Cleanup utility because of reliability problems, or is it only made available in specific tools Fixit.

  'Article was published under Q290301.

  View
  This article previously contained a link to the utility Windows Installer Cleanup (MSICUU2.exe). If you have been directed to this article to solve a problem in one product other than Microsoft Office installation, please contact your software manufacturer for installation on the product.

  While the utility Windows Installer Cleanup fixed some installation issues, it sometimes damaged other components installed on the computer. For this reason, the tool has been removed from Microsoft Download Center. The Fix it Solutions in this article allow you to completely remove the suites Office 2003, 2007 and 2010 without damaging other components of Windows.

  This article covers the versions of Office 2003, 2007 and 2010. In addition, there is an article that covers the steps to manually remove Office 2007.For more information, click on the number below to view the article in the Microsoft Knowledge Base:
  971179 how to uninstall suites Office 2007 so I can't uninstall it by using the function "Add or Remove Programs"? »

  How to uninstall the suites Office 2003, Office 2007 or Office 2010 so I can't uninstall it from Control Panel?
  http://support.Microsoft.com/kb/290301

  Windows Installer Cleanup utility is replaced
  http://www.Symantec.com/connect/blogs/Windows-Installer-Cleanup-utility-replaced

  Taken from the Microsoft Windows Installer Cleanup utility
  http://Clubhouse.Microsoft.com/public/post/b8f567d6-629f-4E27-A571-491541ba8f2e

  Another suspect could be registry cleaners, dip you into those?

• device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic__

  device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic
  in troubleshooting, he said I must be connected to the internet, which I am connected via my LAN with yellow cord. If anyone knows how to solve this problem, it would be much appreciated. Ive called microsoft and they were lying to call back me within the hour and im still waiting for them :(

  Hello
  Direct link to the site Reltek with drivers below:
  Driver Realtek RTL8192E for Windows7 here

  Always the best choice is to use the drivers from your motherboard, desktop or mobile site.
  Second place should be device site producer.
  Last chance is updated for Windows.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.