I can not use the formatting function 'comb '.

Similar Questions

• I have an officejet 6600 and I can not use the copy function. any suggestions?

  I just bought an officejet 6600 and I tried to use the copy function.  Is it possible to copy a few items @ a time on the top

  HI yankee59,

  What happens if you go to your printer and select copy on the front panel? Do you get the options to copy as many copies ect...?

• C310 printer all-in-one... reloaded software but can not find the SCAN function

  HP Photosmart prem c310 with OS X 10.8.4.     The scan function has stopped working.  I removed the software and begin by downloading the all-in-one driver software on the HP site.  To install it without problem, but the pilot for the sweep feature that used to have an icon at the bottom of my MAC, did not reappear.  I don't find it or it does not exist.  I can't use the SCAN function without going through the application of screenshot on my MAC and I love how that works... its not as clean and user friendly than the driver of HP scanning function.  How to make it work again?

  Hello

  Launch installation once more, don't forget to check the recommended software HP during the installation:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-111986-1&cc=us&DLC=en&LC=en&

  OS = 4142 & product = 4231205 & sw_lang =

  Once you are done go to Applications > Hewlett-Packard and open the HP scanning application.

  Shlomi

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• the adobe reader of adobe purchased but installed standard first pro. now, the 'pro' trial has expired and I can't use the "standard" functions

  I bought the adobe reader from adobe but installed standard first pro. now, the 'pro' trial has expired and I can't use the "standard" functions How can I solve this in order to use Adobe Standard - one that I bought?

  Hi Jodie,

  There is no standard to pro versions of Adobe Reader.

  You have downloaded the Acrobat version which is paid instead of Adobe Reader software.

  As the trial has expired, then you won't be able to use it unless you have purchased the product.

  However, you can download Adobe Reader for free using this link Adobe Acrobat Reader DC install for all versions.

  Kind regards

  Nicos

• Why can I not use the scanner function if my ink cartridges are not installed properly?

  The scanner allows just as one scanner I have another product of HP that I use for my printing needs? My all in one (C4580) there is an error that indicates that the ink cartridges have not been installed correctly. I have not used this printer as printer in a long time, but use it as my primary scanner. Is there anyway I can overide the "Cartridghe Print badly installed" so I can use the scanner function? Thank you for your help

  You can find information on how solve the error associated with cartridge you have about your Photosmart C4580 paper here.

  With most of the printers HP if there is a visible error on the printer screen it only lets not to copy, scan or fax.

  I hope this helps.

• How can I use the BCGTransform function to treat the 16-bit Image?

  Hi ~

  I use LabWindowsCVI8.5 and NI Vision to make the treatment of the Image. When I read the "IMAQ Vision for LabWindowsCVI Reference Manual", I found that the imaqBCGTransform function only supports 8-bit Image, while I do the BCG to turn on 16-bit image. Are there solutions to use the BCGTransform function to deal with the 16-bit Image? Or any other feature that could make the correction Gamma, contrast and brightness on the 16-bit Image?

  Thank you very much!

  because imaqBCGTransform is implemented as a lookup table, we can understand why it is limited to 8-bit images.

  Now let's take a look at the definition of each of this mandate (from the NI Vision Concepts documentation):

  -brightness: a constant added to the components red, green, and blue pixel of color over color, decoding of the process;

  -contrast: a constant multiplication factor applied to the components of the luma and chroma of a pixel of color in color to decoding process.

  -gamma correction: expand high gray-level information in an image while removing information of low level of gray.  (the chapter on lookup tables gives some examples of corrections gamma)

  now that you understand that this transformation is a simple mathematical function, simply calculate the correction for each pixel on your 16-bit images.

  I know not the exact formula used by the imaqBCGTransform function, but you should be able to approach by performing some tests on images 8 bits with the original function... or you can make your own formula... or find one on the net... or you can ask someone at home OR you give the formula...

• How can I use the Ratio_to_report function in obiee

  Hello
  I have to use the ratio_to_report function to create the report.
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/functions124.htm.
  
  This is the link that explains the use of this function. This function calculates the ratio of a value to the sum of a set of values. How can I achieve this in BI
  
  
  Please help me
  
  Thank you
  Angelique

  Ensure that the measure is not shaved base measure, and it is the measure of level of detail...

  need more information about your data modeling, how tables are joined and how you aggregate them...

• Why can't I click on some parts of my screen only if you are using firefox. I can not use the upper part of my scroll bar, but can use the background. I cannot click on the top of all sites, but he can click on any part of the site.

  If you use firefox, I can't use my up arrow of the page or click on the upper part of the scroll bar to make it move. Can I use the middle and the bottom of the bar. Also, I can't click on some items that are on a certain part of a web page (upper part). When I use firefox to open my email the same thing. I can't click on the upper part of the page e-mail delete tab, check e-mail tab, etc. However, I can click on it when I use internet explore so I don't know if it of a firefox issue or not. Thank you

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• How can I use the SUM function to calculate the number of employees in the comp. & deptnt?

  I have two tables: employees and their departments. I'm figuring the total employees by the Department and the total employees of the entire society. I know I have to use the SUM function, but I can only calculate total employees by Department and company separately. I need to get this result:
  
  

  DEPT_NAME     DEPT_TOTAL_SALARY         COMPANY_TOTAL_SALARY
  RESEARCH                  10875                        29025
  SALES                      9400                        29025    
  ACCOUNTING                 8750                        29025      
  
  
  This is my code:
  
  SELECT department_name, SUM(salary) as total_salary
  FROM employee, department
  WHERE employee.department_id = department.department_id
  GROUP BY department_name;
  
  SELECT SUM(salary)
  FROM employee;
  
  
  
  
  
  
  Can somebody help please?
  Thank you in advance.

  Published by: user13675672 on January 30, 2011 14:29
  
  Published by: user13675672 on January 30, 2011 14:31

  Hello

  Something like:

  SELECT dname,
         dept_tot_sal,
         SUM (dept_tot_sal) OVER () comp_tot_sal
  FROM   (SELECT   dname,
                   SUM (sal) dept_tot_sal
          FROM     dept, emp
          WHERE    dept.deptno = emp.deptno
          GROUP BY dname);
  

  There might be a smarter way, with no re - select.

  Concerning
  Peter

  Analytical functions:
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17118/functions004.htm

• I use iphone 5 s updated to 9.2, but I can not use the network and call :( Please help me

  I use iphone 5 s updated to 9.2, but I can't use the network and call someone help me please

  What happens when you try to use the network?

• Can not use the hash within forms (tips) function

  Hello Guru,
  
  Oracle 10.2.0.4.0 on Linux ES4 with a forms 6i application.
  
  We have this simple hash function that I use as a program unit on a user form in forms 6i.
  It hashes passwords using this function;
  
  create or replace function md5 (value varchar) return varchar2 is
  v_input varchar2 (2000): = value;
  hexkey varchar2 (32): = null;
  Start
  hexkey: = rawtohex (dbms_obfuscation_toolkit.md5 (input = > utl_raw.cast_to_raw (v_input)));
  return of nvl (hexkey, '< null >');
  end;
  /
  
  I want to use it on a front Insert and before update trigger within forms. When I have the use of the md5 function code it gives me an error something on air of "cannot use this function in a sql statement" for example, that I expect to use it as follows:
  insert into users (username, password) values (: user.username, md5(:user.password));))
  and the same would go for the update.
  I know that I can pull this off the form code and create an insert or update trigger after and call that the md5 function here, but I like to keep the code of hash in the user form - I already have 4 triggers in database on the table and do not want to create more.
  
  Any advice would be great... :-)

  Just a small chance: try to call the function by using the names of block and item OTHER than: user, user name, and password.

  All or part of them are reserved words, and maybe that's the problem.

  If not, why not just call the function in the form to define a declared value of pl/sql, and then use this value in the insert and update statements.

• Can not use the Gmail account more

  Since that day (May 27, 2015) I can't use one of my accounts Gmail w / T.Bird more. On the other (older) I had to put safety at 'low' or something today via the web interface of Gmail. Then he worked kind of new (AddressBook adds now no longer works, but that is another problem).

  When I check my email from Google via a web browser, then I see that there are emails. But I do not see these mails in Tbird. Google did some extensive fiddling with today?

  Thunderbird still works with a gmail account?

  Now for this address book

  See https://support.mozilla.org/en-US/questions/1064153