I can not watch videos on my pc, how can I solve the problem.

Similar Questions

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• I am trying to add itunes to an old computer for my kids. It has the windows xp operating system. problem of Setup Windows how can I solve the problem?

  I am trying to add itunes to an old computer for my kids. It has the windows xp operating system.  When I try to install itunes, I get an error message that says: I'm having problems with my windows installer.  I don't have an existing copy of itunes on the computer that would be a new installation.   How can I solve the problem?  I have a new computer with windows 7 and had no problem with installation on it.

  If you can not receive answers that will solve your problem, I would suggest that repost you to...

  Cummunities to Support Apple - itunes for Windows:

  https://discussions.Apple.com/community/iTunes/itunes_for_windows

• Webshots will install in Windows 7 Professional, how can I solve the problem?

  Webshots will install in Windows 7 Professional, how can I solve the problem?  (The installation program starts to run, then it is de-energized and does nothing.)

  Hi Bill,

  You are able to install other programs on the computer?

  There is no information available as to the compatibility of Webshots with Windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Webshots%20&OS=32-bit

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the steps in the link and check if that helps.

  Diagnose and solve the program installation and uninstallation problems automatically

  Method 2: You can also try to follow the steps in the link and check if it helps.

  Problems installing and uninstalling programs on Windows computers

• I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

  I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

  How can I solve the problem and use the software again?

  If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

• I downloaded the acrobat on my iPhone and IPAD player, and when I want to open an attachment the reader is not an option. How can I solve the problem

  I downloaded Acrobat reader on my iPhone and IPAD. When I go to open an attachment, acrobat is not an option. How can I solve this problem?

  Hello

  What is the application you use to read email?  It's Apple Mail (the default mail on iPhone and iPad app)?

  Please take a look at the section "Open email" the following documents of the FAQ.

  How to open PDF documents in Adobe Acrobat DC for iOS (iPad version)

  How to open PDF documents in Adobe Acrobat DC for iOS (iPhone version)

  If Acrobat Reader for iOS is installed properly on your iPhone and iPad, Acrobat Reader should appear as one of the options for the iOS 'Open In' feature.

  Please let us know if you have any other questions.

• HOW CAN I SOLVE THE PROBLEM, "FIREFOX IS INCOMPATIBLE" IN MY FIREFOX TROUBLESHOOTING REPORT?

  On my desk when I click on the firefox icon, pops up 'USER ACCOUNT CONTROL' - DO YOU WANT TO ALLOW THE FOLLOWING GUIDELINES
  PROGRAM TO MOVE TO THIS COMPUTER? (the program name is firefox). I click 'YES' and my opening page appears.
  This, the only way I can access my portable browser which is firefox. In case of problem report says "Firefox IS INCOMPATIBLE.
  HOW CAN I SOLVE THIS PROBLEM? Thank you.

  KENNETHM said

  Hi Sashoto:
  Because I'm not a computer genius I forgot an important part of the info
  I have WINDOWS 7 Home Edition NOT in WINDOWS XP. That's why I think
  This version of FIREFOX UPDATE 36 should work with WINDOWS 7. All new
  recommendations for a solution to my problem? Thank you!

  Please follow these steps and let me know if these work:

  • Open the Windows Task Manager
  • Click the process tab
  • Click on show processes from all users
  • You may be prompted for confirmation. Say yes, or type the password.
  • Search for firefox.exe or similar process
  • Right-click on the process and select end process tree
  • Now, open computer > (c :)) drive > Program Files (x 86) > Mozilla Firefox > uninstall > helper.exe)
  • Run the installer-United Nations
  • Restart your PC
  • Reinstall Mozilla Firefox

• What does "cannot write: c: / program files/dell support center/imstrayicon" means and how can I solve the problem

  What does "cannot write: c: / program files/dell support central/imstrayicon" mean and how do I remove the note from my screen or solve the problem

  Hi Thomas,

  1. when exactly you get this message?

  2. this happens to you on starup windows or when you try to use a specific program?

  3. did you of recent changes on the computer?

  This seems to be an error related to the centre of Dell Support.

  Step 1:

  If you receive at the start, then you can try to disable any support Dell Center entries in startup items and see if it helps.

  a. Click Start, type msconfig.exe in the start search, and then press ENTER.

  b. click on the Startup tab and uncheck then the program in the list.

  Hope this information is useful.

• External hard drive does not work. Is there another way I could solve the problem without formatting the external hard drive?

  My external hard drive works. I tried to plug and when I tried to open it, it says to format the drive until I could use it. Everything works well as when I plugged the USB icon shown on the screen. When I check the disk management, it showed that the partition of the drive is there.

  I tried to change the drive letters, but still having the same problem. I also tried to run the disk check on the command prompt and the properties of the drive, but it still can not because there is error popping up saying that the disk check cannot be performed because Windows cannot access the disk.

  Is there another way I could solve the problem without formatting the external hard drive?

  I tried the first step in troubleshooting the hard drive, but it gives a
  error in saying that "hardware changes might not have been detected.

  So I tried the second method, and when I click on the "Check now" button his
  gives an error saying that "the disk check cannot be performed because .
  Windows can not access the disk".".

  So is there any other way or option?

  Thank you

  Jason

• How can I solve the problem of slow computer or what nested steps I need to take more things that I mention below to slow computer speed?

  Hello

  I know that for your computer to start faster, you can disable in msconfig certain applications or auto-start services

  I also know that to make your computer faster to do a virtual and half larger than the memory size, more you will need to start it and the value of the same size virtual memory, for example start value 3000 end value3000.

  I know also some malicious spyware can slow down your computer.

  In addition, you can add more memory to mke your computer more fast, your drive hard must be empty of 25%.

  In addition to these things I mentioned before nested thing wat do I check to solve the problem of slow computer?

  can you give me some?

  Thank you

  Johan

  The size of the virtual memory required will depend on the type of requests and is influenced by the installed physical memory. The 1.5 times value really applies to computers with a limited amount of ram and the use of virtual will decrease with an increase in physical (but remove never virtual memory altogether) while Shawn says investigate fitting over RAM.

  Setting the pagefile identical to max and min values will reduce fragmentation but was so moving to a less actively used by car.

  http://TechNet.Microsoft.com/en-us/magazine/ff382717.aspx

  The largest suites 'internet security' may have much more impact than the plain simple AV (that's why I use MSE).

  By far the biggest kick in performance should be move to the SSD, it reduces by half my boot time.

  If a desktop computer fits a discreet graphics card, she discharge the graphic CPU and restores memory used.

  As well as Msconfig, check the contents of the process in the Task Manager tab. Most will be perfectly legitimate, but you can identify the odd thief of uninstalled programs.

  NOT tempted by claims of speed countless programs available. Rarely, they make a significant difference and can do serious damage.

• Help! How can I solve the problem of synchronization on my XP?

  The clock on my HP XP jumps always six minutes fast despite synchronization with the internet every week! How can I fix?

  Hi Adam,.

  Sorry to hear about the issue. I arrived to find those articles that should help you to solve the problem here.

  First, follow the steps in this article. See how it goes.

  If this is insufficient, install the hotfix article to see if it corrects the problem.

  I hope this helps!

• I have replaced my hd, reinstalled the operating system, but you forgot to activate vista. How can I solve the problem?

  After that my hd, I decided to replace it as well as reinstall Vista Home Basic using the system recovery disk, that I bought at HP in 2007. My laptop is a pavilion dv6000 with Vista 32 bit.

  Unfortunately I didn't, I had to turn my copy of vista on my pc within 30 days, since I got my pc sometimes without incurring in this issue. I tried to insert the cd in the back of my pc key, but to understand that no longer works, so I tried with the new cd key of my drive to restore but that no longer works.

  How can I solve this problem?

  gscarabel wrote:

  After that my hd, I decided to replace it as well as reinstall Vista Home Basic using the system recovery disk, that I bought at HP in 2007. My laptop is a pavilion dv6000 with Vista 32 bit.

  Unfortunately I didn't, I had to turn my copy of vista on my pc within 30 days, since I got my pc sometimes without incurring in this issue. I tried to insert the cd in the back of my pc key, but to understand that no longer works, so I tried with the new cd key of my drive to restore but that no longer works.

  How can I solve this problem?

  Hello

  Call Microsoft and tell them about this. The operating system is a version OEM and MS should help you...

• Operating system windows vista, cannot create contact groups after the export contacts from another computer, how can I solve the problem

  I had surgery with vista and Windows mail and setting up the contact email groups, however I had someone export my 'contacts' to another computer that has worked on xp, since which time it is so more ease to set up groups.

  I tried for hours as a software specialist and can't seem to solve the problem

  Thanks for any help - Pleease

  David Rumsey

  Missing the Windows Contacts toolbar buttons
  http://www.vista4beginners.com/missing-buttons-from-Windows-contacts-toolbar

  Vista - "New Contact" and "Contact Group on new" button missing
  http://www.Vistax64.com/tutorials/186477-new-contact-new-contact-group-button-missing.html

• How can I solve the problem of the LR 5.7 do not import does not. NEF files?

  5.7 LR won't matter. D810 NEF files.  Any suggestions? I don't have this problem w of earlier versions of LR.

  All versions of camera specific need, or more version of LR to read RAW files.

  Look here for the specific version of LR that takes care of your camera.

  Devices supported by Adobe Camera Raw

  You need at least this version or later to import RAW files directly.

  I also suggest that you update LR V5 in the 5.7.1 updated.

  Update of Lightroom

  Closer to the bottom of the page, you will find the 5.7.1 update.

  You can also use the Adobe DNG converter program to convert newer files of the NAVE of the Nikon camera to the DNG file format so those who will be important in the old version of LR that don't specifically support your new camera.

  Digital negative converter Adobe 9.x

  Just download the version of OS you are using, Mac or Windows.

• How can I solve the problem of the graphics in the game on vista?

  I have the game MA FIA and I played it on my previous Vista Machine without any problem. On this brand newmachine vector graphics of the game and
  explode in all directions, which makes the game impossible to play. How can I fix it? I bought my first machine the day before vista came out in the hope of
  get a XP machine, but it is automatically updated to vista. So I'm sure it was a first version (32-bit probablym... I can't say now, the motherboard is fried)

  Its a new computer brand spankiing
  with Vista Home Premium 64-bit

  Any help? I love this game

  frucstrated,
  Thanks for posting on the Microsoft answers Forum.  First I would make sure your video card drivers are updated.  I know it's a whole new machine, but it is always good to make sure you have the latest version of the driver.  Then can go to the game icon and then right-click on it and select Properties, then the Compatibility tab and then check the box run in compatibility mode.  I would suggest trying to run in Windows XP (SP3) mode first and see if that helps.

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.