I can't believe I've been scamed
I can't get on my lap top as its asking for a password to start that
Double wire.
Please do not post the same question more than once here, which could cause problems.
I said to you in your other Thread on this subject.
And this applies to your circumstanes as you say that you now have a password that you never had before.
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Here is my response to your other Thread.
If you gave them remote access and you do Internet banking, contact your bank, explain, and change passwords.
If you use your online credit card, cancel and get a new one issued to you.
And the only way that willl you know that you are free to them is to do a clean install of your operating system.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Microsoft does not contact you unless YOU have made prior arrangements with them to do.
There is an article in the link I'm you provide at the end of this one
Read this Information from Microsoft:
"Avoid scams to phone for tech support.
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx
Don't be fooled of unsolicited calls. Don't provide personal information.
Here are some of the organizations that cyber criminals claim to come:
Helpdesk Windows
Windows repair center
Microsoft technical support
Microsoft technical support
Windows Support Group Technical Department
Microsoft Research and Development Team (team of Microsoft R & D)
Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.
See you soon.
Tags: Windows
Similar Questions
-
I have a key for download. I just want to get the load down, so I can move to windows 7 Basic windows Pro 7 I just paid for. I can't believe that it should be this difficult.
Why couldn't there was a link on the confirmation e-mail to download the program.
You can use the product key and the Basic Express in Windows 7 Home Edition upgrade upgrade to Windows 7 Professional.
If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Home Basic to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
-
I was interested to get a subscription to the cloud, but I just found out that my GPU is not compatible with After Effects. It's a deal breaker. Can't believe that there isn't a patch or something for this graphics card excellent!
The only feature in After Effects for which this card cannot be used is acceleration GPU of the obsolete plotted in 3D rendering engine Department. All the other features of After Effects GPU must serve very well as this card. Keep in mind that After Effects uses the GPU for very little, so the GPU doesn't matter much for After Effects, anyway.
-
I can't believe that I'll have to ask a COMMUNITY FORUM to simply find a phone number to contact the company that I have a creative cloud membership with so that I can talk to a human being on a phone. I'm no luddite, but it is quite beyond me. Who should I call?
Phone support | Orders, returns, exchanges
http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html
-
It seems iPhotos can where the photos have been tokens without GPS information?
I had to travel to Iceland two weeks ago. I had turned on my 6s iPhoone, while GPS receiver.
The picture on my iPhone and my Macbook Air can identify where I toke the photos to see the name of the place that I toke the photos and place the thumbnails to the right position on a map. That's great!
But I can't find that there is GPS data in each photo EXIF Info! I tried to read the GPS data by using the command line or from an extract tool: exiftool... NO GPS data in photos EXIF Info!
Why can't data from GPS location in photos exif info, while the pictures can say where the photos have been symbolic?
The reason why I want to dig the GPS data in the photos I have token by iPhone 6 s is:
my camera does not have a GPS receiver to build-in. I want to get the GPS data in the token of photos from iPhone 6s then write on photos without GPS data using tools such as exiftools.
Thank you for your time.
Li
But I can't find that there is GPS data in each photo EXIF Info! I tried to read the GPS data by using the command line or from an extract tool: exiftool... NO GPS data in photos EXIF Info!
Most of my photos iPhone 5s is the GPS tags display. How you have exported photos to see the EXIF data?
When you export the edited versions, select "location information". File > export > export... photos.
When you export the originals (file > export non-original), activate the sidecar file.
Then you should be able to see the GPS values with exiftool or outline:
The first pictures after activating the iPhone have no tags GPS, if you the dishes inside or the iPhone has not yet found enough GPS satellites.
-
How can I know when ive been hacked
a fake hotmail was created with my photos sent to people ive never met or spoken to and the pictures that were on my computer that I thought I had deleted have been recovered and used!
Hi, Robert Ruelas,.
Compromised account, unauthorized access
You encounter connection problems with your Windows Live ID? This usually happens because that...
- You forgot your password.
- Someone has stolen your password and use your account to send spam. We block the compromised accounts to protect you and your contacts, but also to help you recover your account.
The best way to regain control of your Windows Live account is to change your password. Thereafter, you must ensure that your account information has not been changed by the attacker. Otherwise, it could take control of your account again. Here are the steps you should take to regain control of your account:
- You can still sign in with your Windows Live ID address email and password? If you can, you should change your password.
- Are ask you your mobile phone number after signing in? At sign in, we can ask for a mobile phone number in order to send a text Message with a secret code that you enter. This prevents spammers from using your account.
- If you are unable to connect, try to reset your password.
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41
How can you tell if your system is under attack?
You notice something odd on the behavior of your system? Chances are that your system may be compromised. Your system may have been compromised signs include:
- Exceptionally low network activity, disconnection from the network service or unusual network traffic.
- An alarm system or a similar indication of an intrusion detection tool
- Suspicious entries in the system or accounting of the network (for example, a UNIX user obtains privileged access without using approved methods)
- Accounting discrepancies (for example, a person opinion gap a 18 minutes in the accounting log, in which there is no correlation)
- Failed logon attempts
- New user of unknown origin accounts
- Log entries unusual such as the network connections of unknown computers or services, connection failures.
- New files of unknown origin and function
- Unexplained or attempt to change the size of the files, check sums, date/time, stamps, including those related to ExΘcutables systΦme or configuration files
- Unexplained addition, deletion, or modification of data
- Refusal of service or activity of the impossibility of one or more users to connect to a account; including connections to the admin/root console
- System hangs
- Poor system performance - system seems to be slower than normal and less sensitive than expected. (Note: unexplained disk activity may be due to the system maintenance records such as cleaning of disk files while the system is idle, this is normal.)
- Any unauthorized use of a program or adding an application of sniffer to capture traffic network or names of username/password
- Port-scanning (use of the exploit and scanners of vulnerabilities, the remote queries for more information on the systems and/or users or social engineering attempts)
- Use unusual times (statistically, greater security of the incidents occur during working hours than at any other time)
- Once indicated the use of one account which does not correspond to the true last time of using this account
- Unusual usage patterns (e.g., programs are collected in the account of a user who does not know how to program)
For more detailed help to determine if your system could be compromised, please see the following information from the center of Coordination CERT:
CERT Windows NT intruder detection checklist
-
Windows 8 sucks can't believe traore put it * here to the pulic
Windows 8 sucks cannot believe he would put this here for the competition, did not have all the hp help my next computer will not have windows on it I'm done with mac .go crappy windows
On Saturday, June 8, 2013 18:19:27 + 0000, LarryBukovich wrote:
Windows 8 sucks cannot believe he would put this here for the competition, did not have all the hp help my next computer will not have windows on it I'm done with mac .go crappy windows
I would like to point out something that you may not realize: Windows 8
has two interfaces; the modern/Metro Interface (which may be all the)
you have looked at) and the traditional desktop Interface. That
Traditional desktop interface is almost identical to Windows 7
interface; the biggest difference is that there is no Orb start
Click to bring up the start menu.
But note that you can get the ORB start by using one of the many
third-party programs, are free or very cheap (the classic interface
http://classicshell.sourceforge.NET/ and debut8 to
http://www.stardock.com/products/start8/; my personal preference is
Debut8, but they are both very good). And goes from an interface to
the other is very easy; There are several ways, but simply by pressing
the Windows key is perhaps the easiest.
Just install one of these two and using the traditional desktop computer
interface may be a better choice for you than going to Windows 7 or a
Macintosh.
I use Windows 8, almost exclusively with traditional workstations
the interface and with 8 Start installed. If you were to look at and use
my computer, you would have a hard time realizing that it is not
Windows 7. -
You can restore messages that have been deleted from the Recycle Bin?
I deleted some emails today by mistake, I know, on Gmail, that they restore these. Can it be done on the apple mail?
Using Time Machine, Yes. Just set up and return to the p [anointed just before that you deleted.
-
Z400 workstation: I CAN'T BELIEVE THAT NOBODY has AN ANSWER FOR THAT! SAME HP?
Myself and several others have published about this same problem and no one has an answer. I find that hard to believe.
Mistakingly, I put all my PCI ports to calculate in the BIOS. so now when I boot bios allows the graphics card and do not see. so the boot stops and get 6 beeps and flashes about 4 times then nothing. Problem being the pc does not start far enough to get into the BIOS settings. I have closed, power cord disconnected, pushed button to exhaust the load, removed the battery, pushed the button reset CMOS. nothing is reset to the factory BIOS. There must be some sollutin for this. After all, it's all just bad settings on my part not a failure. Come on HP masters help us all get to the bottom of this... PLEASE, I BEG YOU!
P.S. also jumped the CMOS pins...
I got it!!!
Then the rider of crisis recovery worked! This allowed me to Flash the BIOS before anything else. I even had to take my my other Z400 graphics card so he could recognize again. After that I ran, I put the old card in and it runs great!
Wow it took me a few weeks to get fact (CRISIS RECVOVERY RIDER) I'll never forget that one...
-
I deleted "Microsoft Download Manager" thought it was a temp program (not paying attention!) Now I programs looking for paths! The figure that it took a lot of information with it.
I have advanced system care and can see all the things that I deleted in the last two days (and that's a lot) it's in the jargon... Windows XP SP3 32-bitI know it's a long shot, but can someone help?Yes, at the time of the download, not sure that I need, but now I do what I have programs that can not open or cannot perform when they do.
So, to retrieve the 'ways' of things...Can you give an exact message of one or two of them?
PATH NOT FOUND covers a lot of ground - but it would be good if there is more to it and a program of a name or two that gives you this question. (So we know if it is only third stuf or Microsoft and other third-party things.)
Have you tried to reinstall the stuff that gives you errors?
-
I can't send emails. has been before and nothing has changed since I did.
'Calcutta shorts', account: ' * address email is removed from the privacy *', server: 'outgoing.verizon.net', Protocol: SMTP, Port: 25, secure (SSL): no, error number: 0x800CCC17
Account: ' * address email is removed from the privacy *', server: 'incoming.verizon.net', Protocol: POP3, server response: '-ERR [AUTH] failed authentication ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92
1. name of the account is supposed to be your username. Do you use your e-mail address as your user name, or it IS a username that you have neglected to use?
2 re: incoming.verizon.net... is part of the error message '-ERR [AUTH] Authentication failed',
Did you put a check on "connect using password authentication secure"? You're NOT supposed to.Here is a link that you can compare your settings against.
NOTE : the link says Outlook Express. It is ok. OE and WM using the same settings.t-4-2
-
Vista
DefragmenterHi Augie,
Welcome to the Microsoft Answers site!
1. you run defrag disk for the first time?
Disk Defragmenter is a tool that rearranges the data on your hard drive and brings together fragmented files so that your computer can run more efficiently. We must keep in mind that the Disk Defragmenter uses disk access low priority and processor so that it is not influence your current running programs. This automatically translates a slower process. Disk defragmentation can take a long time if you run it for the first time and also depend on the space of hard disk and available data. If may take up to 15-16 hours, depending on the data and the bad clusters on the hard drive.
Try the suggested methods.
Method 1
If you want to reduce the number of unnecessary files on your hard disk to free up disk space and help your computer run faster, use disk cleanup. It removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
Method 2
You can run a disk scan command to remove bad sectors on the hard drive, then run Disk Defragmenter.
1. open the computer by clicking the Start button, click computer.
2. right click on the hard drive you want to check, and then click Properties.
3. click on the sur l' onglet tab Tools and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.
To perform a full disk check, select search for and attempt recovery of bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.
To check for errors file and the physical errors, select automatically fix file system errors and search for and attempt recovery of bad sectors.
4. click on Start.
Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
http://support.Microsoft.com/kb/942092
Check your hard disk for errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errorsKind regards
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
BlackBerry smartphones can not believe it...
I called in support for enterprise 4.x for exchange 2003 sp2.
How can I push the software for handhelds of the user? I have the curve BB, some other models, etc. The tech said how would push you all the different devices? Oh, lets see, maybe create a group of users and manage all user specific issuers? Or wait, how about it install since it does not apply? Its like trying to push a patch on windows 2003 server OS and run the fix on a XP workstation... Will not WORK as it should...
Technology said,"won't work. "How can I update 300 devices?
I could see it's true if it's 1995 and we were running OS2 warp, Windows 95, etc... Come on!!! Why not???
You need to upgrade each. There is a way faster than both.
-
BlackBerry smartphones, I can't believe this... Help, please!
Yesterday, my phone crashed me. The screen was broken. Total accident... I received the new phone today, inserted the SIM card and it says: no data... I have always updated and everything saved on my SIM card... I also backed up on my PC with the blackberry desktop program... nothing works, that too is a data only a few months ago had put on it...
Until about 10 minutes ago, I was able to get my broken phone to turn on and thought I could it synch with no screen... now it won't turn... I lost 200 + numbers and other very important data... countless photos... basically my whole life... FML.
Any help on the recovery or restoration of a broken 8310 data would be greatly appreciated.
Nathan
Hello and welcome to the Forums of Support BlackBerry.com.
You cannot save everything SIM... very little can move the SIM card... basically that your contacts (and numbers only, not email addresses) and SMS messages.
If you return to your PC? How recently did you backup?
Search your entire hard drive of PC for "*.ipd" (without the quotes) and look specifically into the My Documents folder. No matter what? Don't forget where this file is located.
With the new device, open Desktop Manager > Backu/restore > advanced.
On the right side will be your device data listed.
On the left hand pane will be your backup data. Nothing here? Above this pane, click file > Menu and navigate to the IPD file you found earlier, your most recent backup. Click on it and open it.
Now, all your data backup will be in the left window, and you can choose what databases to restore. Highlight highlight one or more so that it appears highlighted and click the arrow to the right in the middle of the screen and follow the instructions...
Good luck.
-
I have a hard time to see the white font on white or pale background. How can I change the font or the background color of the taskbar?
Hi curiousinmo,
· Did you do changes on the computer before the show?
Follow the steps in the article.
Change the colors on your computer
For reference:
Maybe you are looking for
-
3.70 BIOS update for model ptm50e Tecra M5 says this computer not supported
After you download an update of the BIOS for my Tecra M5 PTM50E model when I try to install it, says this computer not supported and yet it was obtained from the download page of Toshiba for my model? Also said the Management Console download also ma
-
Hello all, I just noticed that my Apple Watch (stainless steel 42mm). Drag to the right or left when I'm in the message section I don't know what the problem? can someone enlighten me please? ! I have reset a few times and I have firmware (2.2) updat
-
How remove blue highlight image on satellite image "cards"? El Capitan 10.11.3 running
-
P10-304: Intel 2200 Wireless MiniPCI - does not
I have s Satellite P10-304, in which I mounted an Intel 2200BG wireless mini pci card to. I can't it to work. Blue neon does not illuminate. The card is recognized in Device Manager and States that he is working. I tried to download driver Toshiba wi
-
"When I remove Microsoft Silverlight version 2.040115.0 it fails to remove and says" installation source is not available. Verify that the source exists and you can access» I am logged in as the administrator of the computer doing this and need to r