P10-304: Intel 2200 Wireless MiniPCI - does not

Similar Questions

• Tecra S3 - Intel PROSet/Wireless window does not respond after changing settings

  Given that I've updated the driver and the utility Intel PROSet version 9.0.4.17 driver and tool PROSet to version 10.5.0.1 for Intel BG2200 WLAN card to build-in the PROSet tool window freezes every time after that I changed a parameter (for example, by adding a new profile).

  Closing the window with ALT - F4 also does not work unless you kill the process in Task Manager.

  Is this a known problem or is there any group of fixes for the driver or the Intel PROSet tool available?

  Hello

  The ProSet utility is a clean product Intel and if there are updates you find on the Intel Web site.
  But in my opinion, there is only a corruption of installation.
  How do you install this app? Have you removed the old version first?

  I think that if you want to update the programs, you must always first remove the old version and then after reboot of the new laptop, you can begin the installation of the new version.

  You could use additional own program register as a CCleaner. It s a freeware application and it checks the registry for some corruptions.

• Tecra S1: Rf Ubuntu wireless switch does not work

  Hi all

  I recently bought an Intel mini-PCI wifi card for my Tecra S1 under Ubuntu. It is detected without any problem, Intel provides even native drivers for Linux. However, the hardware to activate wireless switch does NOT work. According to iwconfig, the radio is off. I use the ipw2200 driver which can detect the hardware and the software rf_kill. I can enable and disable software killing RF, but kill him material stays on.

  I suspect that the radio feature is disabled in the BIOS but I don't have Windows running on the laptop over to change the setting. Is it possible to access BIOS options under linux? Toshutils are not supported by the tecra because she seems to have a Phoenix BIOS.

  I hope you can help!

  Edwin...

  Hello

  Tecra S1 supports BIOS Toshiba you can access BIOS by pressing ESC at the beginning of the startup.
  In any case I think you won't find anything in the BIOS.

  If you are not able to use the switch of material on the side of the laptop then the Wlan card is not compatible or the hardware switch is malfunctioning. I would say that the card is not supported.

  Maybe the insulation of the 13 pin might help please check that this son:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19843&MessageID=74074
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15228&MessageID=56522

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• my wireless keyboard does not work with windows xp

  Hello

  I installed osx el capitan yesterday.

  My wireless keyboard does not work when I'm on windows xp. For the mouse is ok.

  And no problems with OSX el Capitan.

  Thank you very much for the help.

  Boblecingle

  Windows XP is now fifteen years old.

  Are using you it on a Mac somehow, for some reason any?

• Tecra A3 - Creative wireless mouse does not work

  My Creative wireless mouse does not work while the touchpad is installed.

  Even if I turn off the touch pad, the seal of the mouse does not work.

  Anyone know how to fix this?

  Thank you
  R.P.

  Hello

  On this path, it is not easy to say what the problem is. I guess you have some software installations to your external device. Install it and it should work.

  As much I know external mouse functionality does not depend on the touchpad settings.

  Good bye

• Wireless adapter does not

  recently restored my HP Pavilion DV6-6C35DX, and now the wireless card does not work

  It appears in the device as Realtek PCIe GBE Family Controller Manager

  the hardware id is PCI/VEN_10EC & DEV_8168 & SUBSYS_1805103C & REV_06

  I tried to search for the drivers but can't seem to find a

  any help would be greatly appreciated

  Thanks in advance

  not 100% sure how mark as resolved, but in the meantime eventually, fortunately the pilot

  Thanks for all of you who have seen this, but as I'm sure someone would have helped me

• HP Photosmart 5520: wireless radio does not

  I can't connect to my router. I run a wireless network test and he said that WE wireless... PASS, but he also said "the wireless radio does not work, contact HP support.

  Please advise...

  Not good.  It seems that your radio wireless the printer is dead.  If the unit is under warranty, you need to call HP.

  What you can do, is get a USB print server and convert the USB connection to a wireless connection.  However, check the prices on these devices because it may be better just to get another printer because they are so cheap.

  Or just use your USB connection.

• HP c309a wireless radio does not, help

  THX in advance for the help. I'm trying to set up printing from my IPad on my hp c309a printer wireless. Can't get it to connect. Just ran diagnosis on the printer wireless. Says ' wireless radio does not. Any help?  THX

  The Radio not work wireless message usually indicates a problem with the card wireless in the printer. I'll try to do a hard reset of the printer. A hard reset will attempt to restore the printer to a good working condition and no settings are lost with a hard reset.   If the reset does not work then you can contact support at 800-474-6836.  The link below provides warranty options.

  Out-of-warranty options.

  Contact Hp outside the United States.

  1. when the printer is turned on power, unplug the power cord at the back of the printer.
  2. unplug the power cord from the wall outlet.
  3 reconnect the power cord to the product and the wall outlet and then press the power button.
  
  Let me know how it goes.

• Satellite Pro L40 - wireless adapter does not work - Vista

  I recently had some problems with my laptop.
  A couple of weeks, I put in a disc of OpenSuse.
  It's not stable anything, but locked me out of my original Vista operating system.

  I reinstallled Vista Home Basic, but there are a few problems.
  Mainly, my wireless adapter does not work.

  When I flip the button to turn it on nothing happens and it is not recognized in Windows.
  I installed Atheros Driver, but still nothing happens, light is not yet.

  Any advice?

  Hello

  First check the device-> network adapters area manager
  You see the WLan card? Or the unknown device appears?

  If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

  Remember that your wireless network card? Maybe it was a Realtek WLan card?

  If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

• HP ENVY 7640: wireless radio does not want 7640

  Buy this printer recently worked for about 20 minutes.  The printer says THE WIRELESS RADIO NOT FUNCTIONING.  Advice or should she be returned.

  Hi @HAYHEATH,

  Thank you for visiting the Forums from the HP Support! I see that you have found a "Wireless Radio does not" error message on your new HP Envy 7640.

  Contact our technical support HP 800-474-6836 because this can be a hardware problem. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

• Pavilion: Wireless keyboard does not respond initially to the top

  Hi, I bought this new PC - with mouse and wireless keyboard - December [2014] and everything seems fine, but the keyboard stopped responding at startup, which prevents me to enter my password. The mouse works fine.

  Blue light on the dongle wireless flashes with each keystroke, but the PC does not have the keys. If I restart the PC, he finds the keyboard immediately. I've tried moving the dongle is almost next to the keyboard, but still without success.

  The keyboard model is: KBRF7171

  Thank you

  Hello @snequers,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your wireless keyboard does not work when booting, and I'd be happy to help you in this case!

  To return the keyboard to the working state, I recommend that you follow the steps described in this document on the keyboard and wireless mouse troubleshooting.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• HP Pavilion g7-1365dx: wireless keyboard does not work.

  I have a combination and connected mouse microsoft wireless keyboard to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help.  I bought a new Logitech mouse and installed the new USB connector and the mouse worked flawlessly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USB connector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

  CJB - 10 wrote:

  I have a combination of microsoft wireless keyboard and mouse connected to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help. I bought a new Logitech mouse and installed the new USB connector and the mouse works perfectly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USBConnector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

  Hi ECJ-10,

  Well, you answered your question yourself. They are different products, so you need 2 USB receivers.

  The alternative is to get a replacement of microsoft mouse if it is still under warranty, they usually do.

  Hope this helps.

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• C309a wireless radio does not

  Hello

  By running the wireless network Test, the report states that: "the wireless radio does not work." Is there something I can do? Or I have to call HP support?

  Thank you.

  JP

  Finally got through technical support and a nice person who has finally understood the problem. I mentioned that the wireless network Test report says clearly "The wireless Radio does not work" and he said it was about as sharp as a fault might be. After a brief discussion with her supervisor, he said that HP would replace the body of the printer - the part with the wireless radio. Overall, a very pleasant conversation and not a long either. The appeal of all took 5 min to determine that HP would replace and perhaps another 5-10 minutes to work the shipping details.  Congratulations (finally) to HP!