I can't connect to the database after reboot
Hi allIM new in linux, im installing oracle database 11g r2 Linux 5.8 everything works fine and I can connect to my database from anywhere and I can use any tool to connect
but
When restarting a BONE I can't access the database again
I get this error when I try to connect from oracle sql developer
io error the network adapter could not establish the connection vendor code 17002
What can I do?Thank you to
Is it a selinux, first check the current status of selinux using the command
/ usr/sbin/getenforce
out of said BIF apply ' then change for "permissive" mode using the command
/ usr/sbin/setenforce 0
also change the value of the variable SELINUX on the + / etc/sysconfig/selinux + permissive or disabled, you will avoid restore application after each reboot fashion
Tags: Database
Similar Questions
-
Error connecting to the database after you run 10 g Forms
Hello
I use Oracle forms v10.1.2.0.2 is the operating system Windows 8 32 bit.
I get the following error (ORA-12154: TNS: could not resolve the connect identifier specified) when I enter the user name, the password, and the database after running the form.
Although I can connect correctly in sqlplus. using the following command: Connect scott/xxxxxx@orcl
the service name is ORCL. I can get it through the following query (see the service_name parameter)
I checked the tnsnames.ora file and it is as follows:
tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = WIN-G6PM1F1OBA5)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
(SERVER = DEDICATED)
)
)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)
I have the settings in the file sqlnet.ora as follows:
SQLNET. AUTHENTICATION_SERVICES = (NTS)
NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT, WIN-G6PM1F1OBA5)
and in file listener.ora as follows:
listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(= Extproc PROGRAM)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP) (HOST = WIN-G6PM1F1OBA5)(PORT = 1521))
)
)
Looking forward for your help in this matter.
I use Oracle forms v10.1.2.0.2 is the operating system Windows 8 32 bit.
I get the following error (ORA-12154: TNS: could not resolve the connect identifier specified) when I enter the user name, the password, and the database after running the form.
Although I can connect correctly in sqlplus. using the following command: Connect scott/xxxxxx@orcl
As already said, the combination is not taken in charge, but it's quite strange rhat you can connect to Sql * Plus, and you get the error of forms: the error is local and means that the tnsnames.ora file is not where it should be, or there are errors it contains.
You have not all errors in the installation? the forms and reports test programs work?
You have a database on this machine? Looks like that the tnsnames.ora you posted comes from a House of database, you have in Oracle Home Forms? (the absence of the latter that would explain the error you get).
-
I can't connect to the internet after the elimination of the virus and new restore point.
I use IE8. I can only connect to the internet in safe mode with network. What can I do to connect to the internet in the normal windows?
Hello
When parasites get installed on your computer, they might create hooks in the system computer activities related to the program "Junk" files When you get rid of the 'Junk' hooks could remain in the system, in the absence of target files (they cleaned) problems are created in the network and Internet related activities.
If after uninstalling the "Junk", the Internet connection does not work as it should, you will need to restart the operating system parts which get trashed by the process.
WinSock and TCP/IP update.
Type Cmd in the search text box.
Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt. Allow the elevation.
Type netsh winsock reset at the command prompt and press the Enter key.
The same processes to refresh the TCP/IP replaces the command typed with.
netsh int ip reset press enter
ipconfig/flushdns, press enter
Restart your computer.
-
Hi, I applied the Group of hotfixes 10.2.0.4 and CPU January 2010 on my 10g database. my server is a windows 2003 x 64 with user specific (oradb)
When I tried to connect to the database, it took 15 minutes for a normal user to open a session and each request is almost as long.
If I connect as SYSDBA, everything seems fine.
I don't see anything relevant in the alert_log or listener.log
The only thing I see is the view v$ session_wait unusual. It seems that there are 26 to 28 the processes that are associated with the timeout, the database status I in runs of laboratory with 11-16 processes.
Can someone tell me what I can look at?
Thank youIf your database is 24 * 7 first thing you creates an appropriate with gravity SR.
In the meantime, you can create a database logon trigger to enable tracing for each session for this user before logging.let the logged-on user and then read the trace file to see what gets you.
-
Need help; I have upgraded to windows 10 and my old laptop has given fresh life. He hastened to start and stop, did not freeze the computer programs and internet was super fast. Then it wouldn't connect all of a sudden, or even acknowledge all networks. No internet is portable useless. I researched and found that many had problems with card after the upgrade to windows 10, so I started windows 7 and have no problem connecting. I had a glimpse of what was possible with windows 10 and I want it! can someone help me understand what driver I need to download it to a flash drive before moving on again to 10.
Well, there is little hope for you, since you have an Intel wireless card.
I have a HP nc6400 with the same card as yours and it worked very well on W10, and then he leaves suddenly.
Not as bad than what you lived, but I had to keep restarting the machine and sometimes, it would be just the connection and would not reconnect.
Here's what I did to solve the problem with mine, so I hope it will work for you too...
I used this driver... a first on the list for 32 bit.
Then I changed some advanced settings for the card in the Device Manager.
Here is a list type of Intel wireless settings and how to access.
There are more settings on the link that we have for our particular model card.
http://www.Intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000005585.html
Here are the advanced settings, which I've listed for mine...
Ad Hoc channel 802.11 b/g value = 11
Mode of Ad Hoc QoS Value = active WMM
Mixed Mode Protection value = automatically CTS
Roaming Aggessiveness value = 1. The lowest
Transmit power value = 5. Highest
Wireless Mode value = 6. 802.11a/b/g
-
How can I connect to the computer after you forget the administrator password?
Original title: LOST the PAST ADMINISTRATOR password; HELP PLEASE; I TRIED TO SOLVE THIS PROBLEM FOR 6 MONTHS!
I deleted my account on my Windows Vista computer. I'm the only user, so I kept my user account and that you have access to my PC. Now that I can't make changes because I forgot the administrator password which CONTROL local USER ask me enter to proceed? How to recover lost administrator password or make a new one?
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126 -
How can I connect to the computer after you forget the password?
Original title: HELP! WINDOWS 7 NETBOOK PASSWORD FORGOTTEN?
I am unable to long on my netbook. I read through the posting a lot without results. I tried to restart in SafeMode (networking), (command prompt) and I'm at my wits end. Need help quickly...
Restart the computer using safe mode, and then log in as administrator. The password is often left blank. You can now set the password for all or part of other users. The next thing is to plan ahead: click Start / Help, then search for help on "password". Follow the instructions to create a key on your USB flash drive file so that you'll never find yourself in this uncomfortable situation.
_________________________If this answer solves your problem, please click "Propose as answer" so that the thread can be closed. Thank you.
-
How can I connect to the account after forgetting the password?
Original title: how to unlock user accounts if you forgot the password?
How to unlock user accounts if you forgot the password? I tried to reformat, but it won't work...
How to unlock user accounts if you forgot the password? I tried to reformat, but it won't work...
There are a lot of options built into Windows to help you out of this situation:- Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
- Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
- Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
- Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
- Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
- Check your paper files (works only if you threw down the password somewhere)
If you take any of the precautions above (creating a password reset disk, creating an admin account to spare using an index of password) you can then perform a destructive factory restore. Consult the manufacturer's web page for detailed instructions. -
How can I connect to the computer after I lost the password of the administrator account?
Original title: lost password windows - no disk drive
I wrote above all forget my windows password
the problem is that my laptop is a little, I don't have a disk drive or a recovery disc
Hello
Welcome to the Microsoft community.
I suggest you for the link and check if that helps:
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password
If your computer came preinstalled with the Windows operating system, I suggest contacting the manufacturer of the system and check if it helps.
-
ORA-01041 connecting to the database
Hi the gems...
We have changed the date of the server system. We did it with retroactive effect for two months.
But after that, we can not connect to the database. Not sysdba, rather than non-sysdba. Sqlplus "virtue sysdba" event is also a failure.
the error is: ORA-01041: internal error. hostdef extension doesn't exist
My database is 11 GR 1 material and windows server.
The last lines of the log of alerts:
***********************************************************************
Fatal OR connect error 12631, connect to:
(DESCRIPTION =(LOCAL=YES) (ADDRESS = (PROTOCOL = DOB)))
VERSION INFORMATION:
AMT for 32-bit Windows: Version 11.2.0.1.0 - Production
Oracle leaves NT Protocol adapter for 32-bit Windows: Version 11.2.0.1.0 - Production
Time: April 27, 2012 12:12
Tracing not lit.
AMT error struct:
NS main err in code: 12631
AMT-12631: username recovery failed
NS secondary err code: 0
NT main err in code: 0
NT secondary err code: 0
NT OS err code: 0
Fri Apr 27 12:12:17 2012
***********************************************************************
Fatal OR connect error 12631, connect to:
(DESCRIPTION =(LOCAL=YES) (ADDRESS = (PROTOCOL = DOB)))
VERSION INFORMATION:
AMT for 32-bit Windows: Version 11.2.0.1.0 - Production
Oracle leaves NT Protocol adapter for 32-bit Windows: Version 11.2.0.1.0 - Production
Time: April 27, 2012 12:12:17
Tracing not lit.
AMT error struct:
NS main err in code: 12631
AMT-12631: username recovery failed
NS secondary err code: 0
NT main err in code: 0
NT secondary err code: 0
NT OS err code: 0
Please help... Thanks in advanceCan you define in your SQLNET.ora below and try again?
SQLNET. AUTHENTICATION_SERVICES = (NONE)
-
Unable to connect to the internet after installing Windows 8 Pro
I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?
Hello
Thanks for posting your question in the Microsoft Community.
I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. you receive an error code or message?
2. what web browser do you use?
3. don't you try to connect to a wired connection?
4. What is the Dell laptop model number?
Please follow the methods and mark the question below:
Method 1:
Step 1:
Start the computer in safe mode with network and check if the problem persists by following the link below.
Start settings for Windows (including safe mode):
http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode
If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.
Step 2:
You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
http://support.Microsoft.com/kb/929135Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.
Method 2:
Follow the steps in the link below.
Wireless and wired network problems:
Method 3:
Follow the steps described in the links below.
Why can't I connect to the Internet? :
http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet
A Wi - Fi & networking:
http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1
For reference:
Connect to the Internet:
http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
Unable to connect to the database. adbldxml.pl
I've updated 11.1.0.7 12.1.0.2 database database with a 12.1.3 apps
I produced the apps appsutip.zip and copied to the 12.1.0 oracle home
but when I run perl adbldxml.pl in appsutil/bin and answering questions that I can't connect to the database
Hello
When I run the listener his race of my former oracle home how change that
You must stop the listener of the old House and new start home. You may need to copy all the files from the old House to the new house network and change the oracle home location in all the files manually (or) you can configure the new listener of 12 at home.
To get an idea please see my blogpost:
http://appsdbaworkshop.blogspot.com/2012/03/Oracle-11gr2-database-upgrade-in-apps.html
Kind regards
A H E E R X
-
Hi al l,.
This is the first time I use sql developer, I downloaded the version Version 4.0.2.15 build 15.21, downloaded the jdk.
and it works fine, but I can't connect to the database,
-We have the database (exsys11) installed on a server,
-J' installed sql developer on my client.
-J' copied 'tnsnames.ora' and 'sqlnet' in the folder of sql developer,.
but he can't see the databases.
I am logged in using a user name and a password and a connection 'tns' and role type = default.
but he can't see my databases?
Thank you
Tools > Preferences > database > advanced
In the last piece, directory Tnsnames, put in your sqldev folder where you copied the tnsnames file.
That's assuming that change your ' basic' connection type 'TNS' and access to 'Network Alias' dropdown list control is not already show you your tns entries.
-
How to connect to the database for all reports EN
Hello
I've developed 100 reports in the client of the production, test purpose that I moved
test client. How can I connect to the database for all reports at once?
Concerning
ThaerHi Thaer,
You can connect to the connection of database for all reports through the workspace of HFM.
Connect to the HFM area--> click--> Explorer, and click Tools--> click Manager of database and respective connections of Production Instance to the Instance of Test required information and that you will be able to connect to the Test database for all reports both change.
Kind regards
Srikanth -
I can't connect to the internet via my host after uninstalled antivirus software and restart
I can't connect to the internet via my host after uninstalled antivirus software and restart it.
I use windows xp on my host computer and all computers in my client. After that I uninstalled the free trial NIS version and restart my host, I lost the internet connection. Tried to restore with the restoration of the system, but when I restarted it, it said the system restore could not be made. I changed it then with my laptop and I can connect to the internet as the host.Hello
This can happen if the uninstall process fails and leaves behind a Symantec registry value. See the following Symantec article.
Unable to connect to the Internet after uninstalling Norton AntiVirus.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows?
322756 (http://support.microsoft.com/kb/322756/ )
Maybe you are looking for
-
What type 3D format file can be used by LV
I'll try to make a 3D model and post it in labview, then make sure it can turn and score. May I know what kind 3-d format file can be used by LV, thanks.
-
Clip + trash characters in option of the help files?
I just received my Clip + to replace my Muvo Tx Fm recently dead (and much loved). So far, I'm pretty happy with it. I came across a problem however. The reason why I liked the Muvo (and I bought the Clip +) because I didn't want to screw with any
-
I'm not too savvy computer. That said, I can't find a simple program to load the music. I'm quite familiar with the "Creative MediaSource Organizer", but this program seems to be inconsistent with the CLIP. Is there a setting that I could change on t
-
I continue to disconnect my default gateway
My internet was broken on my pc for the past few days after trying to run the homegroup. I spents lately not stop trying to solve this problem. Today, I ran a scan on norton as yesterday, I thought it would be a virus so I bought a copy of norton, bu
-
HP Photosmart more B210 - printing is too high on the paper.
The text is too high on the paper. I can solve this problem when you generate letters and reports, etc. by simply letting a larger margin superior, but I cannot produce sheets of labels. I tried to change the paper size under tray settings/Main prop