Error connecting to the database after you run 10 g Forms

Similar Questions

• sqlplus crashes when connecting to the database after you apply the hotfix 10.2.0.4

  Hi, I applied the Group of hotfixes 10.2.0.4 and CPU January 2010 on my 10g database. my server is a windows 2003 x 64 with user specific (oradb)
  When I tried to connect to the database, it took 15 minutes for a normal user to open a session and each request is almost as long.
  If I connect as SYSDBA, everything seems fine.
  
  I don't see anything relevant in the alert_log or listener.log
  
  The only thing I see is the view v$ session_wait unusual. It seems that there are 26 to 28 the processes that are associated with the timeout, the database status I in runs of laboratory with 11-16 processes.
  
  Can someone tell me what I can look at?
  
  Thank you

  If your database is 24 * 7 first thing you creates an appropriate with gravity SR.

  In the meantime, you can create a database logon trigger to enable tracing for each session for this user before logging.let the logged-on user and then read the trace file to see what gets you.

• sqlplus error connecting to the database

  Hello
  
  After the connection to the database using the username and passwd, I get the error message below
  connection is established and able to work asusal,
  
  $$$$$$$$$$$$$$$$$$$
  can u help me how to remove in decline and error below...
  $$$$$$$$$$$$$$$$$$$$$$$$$$$
  
  Enter the password:
  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  Select "Welcome to the database: ' | '. name of database v$
  *
  ERROR on line 1:
  ORA-00942: table or view does not exist

  The user name who logged has not the right to select on the sys.v_$ database view that is exposed through the database of v$.

  HTH - Mark D Powell.

• I can't connect to the database after reboot

  Hi all
  
  IM new in linux, im installing oracle database 11g r2 Linux 5.8 everything works fine and I can connect to my database from anywhere and I can use any tool to connect
  but
  When restarting a BONE I can't access the database again
  
  I get this error when I try to connect from oracle sql developer
  

  io error the network adapter could not establish the connection vendor code 17002

  What can I do?
  
  Thank you to

  Is it a selinux, first check the current status of selinux using the command

  / usr/sbin/getenforce

  out of said BIF apply ' then change for "permissive" mode using the command

  / usr/sbin/setenforce 0

  also change the value of the variable SELINUX on the + / etc/sysconfig/selinux + permissive or disabled, you will avoid restore application after each reboot fashion

• Unable to connect to the Internet after you install the update

  My computer crashed this afternoon. I restored it since restoration, but Firefox lost disk and my Trend Micro antuvirus.  I downloaded the two products, but when I try to install them, they are trying to reconnect to the internet to complete the download.  Or the program is able to do.  I can log on the Internet and to allow them there have turned off the Windows Firewall and Windows Defender, suspecting one of them was blocking the remote connection.  I am running Windows Vista and IE8.  When I Windows Update, I lose all internet connections and have to use system restore to go back before the updates.

  Original title: remote connections

  Hi Cauvagee,

  ·        You are able to access remote desktop connection now after you disable the firewall and Windows Defender?

  It seems that one of the update is at the origin of the problem of Internet connectivity. You can follow the steps below and check it it helps you solve the problem.

  Step 1

  You can access to view the history of update on your computer and the Coachman, who was the last update that was installed when this problem occurred and post back the details of the update.

  To view the update history, follow the steps below:

  a. open the control panel (all items view), and click the Windows Update icon.

  b. click on the link to view update history.

  Step 2

  Check out who are the updates which has been installed on the computer before that the problem began, later, uninstall it and check if that helps.

  1. Open installed updates by clicking on theStart button, clickingControl Panel, clickingPrograms and then underPrograms and features, clickingView updates installed. Note the number KB for the updates have been installed before this problem started.
  2. Select the update that has been installed and uninstall the updates one by one and check the update which is at the origin of the problem.

  Step 3

  Once you take note of the update that causes this problem, you can download the stand-alone version of the update on your desktop and try to install it manually and check to see if it helps you to solve the problem of internet access. To download the standalone version of windows updates follow the steps below:

  a. take note of the update with the Ko only when your computer tries to update and install it.

  b. visit the following Microsoft Web site:http://www.microsoft.com/downloads/Search.aspx

  c. search by downloading the update.

  d. save it on the desktop.

  e. try to install it manually.

  If the problem persists after you have installed the stand-alone version of update, you can try to start the computer in safe mode with network and check if you can connect to the internet and post back the result. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode:http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No longer connect to the internet after you uninstall antivirus software

  Hello

  Please forgive me if there is a simple solution to this problem. I have already undertaken some research and various attempts to correct them accordingly in vain.

  System: Windows 7 64-bit

  Problem - no more have the internet connection after you uninstall antivirus software

  the story so far: yesterday I uninstalled VIPRE Internet Security 2014 as suggested on their guys to support online so I could upgrade to the latest version (2015).

  After uninstalling and restarting, small notification of connection there was an error in this regard. When you look at the map, it linked the wireless modem, but there was a red cross between it and the symbol of the world of the internet.

  I tried another public network and tried to use my phone as a hotspot and still the same result.

  System Restore does not work.

  I defragged and cleaned up.

  I downloaded a program called Vipre rescue to find the virus.

  I tried with windows on and outside firewall.

  I installed a full copy of 2015 AVG (free) and still no luck.

  I tried a flush.bat file (easily on another where I read that someone had the same problem).

  Any help would be most welcome!

  Thanks for getting back to me.

  I dropped last week and held a store of the local computer. I just returned it today. Guys said they had 'fun' with her. Which means it took a lot of time for them to trouble. Apparently there had been some severe or ciritcal crashes who think could have been partly to blame.

• Error connecting to the database

  Hi all
  
  I receive after error message when connecting as the user hr and scott in my database. And when I connect as sys allows to connect me.
  
  SQL > conn hr/hr@oradb
  ERROR:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-01722: invalid number
  ORA-06512: at line 2
  
  Conn scott/tiger@oradb
  ERROR:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-01722: invalid number
  ORA-06512: at line 2
  
  But it allows me to connect as user sys...
  
  SQL > conn sys/oracle@oradb as sysdba
  Connected.
  SQL >
  Thanks and greetings
  Yvon Das

  Find the logon trigger that is the mistake of launch and disable or repair.

• Veeva holiday sample application - error connecting to the database

  I'm new to WebCenter and I'm trying to go through the vacation Veeva sample. I cannot create a new database connection, as described on page 8 of the Veeva_Hands_on.pdf.
  
  I go into the crowd of * 127.0.0.1 *, Port of * 8080 * and when I test the connection I get the following error.
  IO exception: Got minus one since a call to reading
  
  Any suggestions?
  
  Published by: user985561 on September 29, 2008 12:52

  Looks like your first connection attempt is closer to golden. with oracle express edition default SID is "XE" without the quotes, so you'll need spend the ORCL SID that the connection is looking for, so the "currently know of SID given of".

  You should fnd ORCL sid somewhere in the configuration... I'm not familiar with the details of what you are trying to do, but it's my best guess...

• Firefox does not connect to the internet after you try all the troubleshooting, reinstalling, check my firewall, etc. Help!

  Okay, I re-installed Firefox but it still cannot connect to the internet. The original question disabled my Norton antivirus, and I am currently using Windows defender. I have Mozilla removed from the allow list as suggested in the troubleshooting and then re - he added, but which did not help, any suggestions? I am running a full scan now, it has been 2.5 hours now and still running. I can't understand what prevents FF to access the internet, and so far none of the suggestions have worked. I am running windows 8. I try to install troubleshooting information, but it ask again me what to open the xpi file and I have no idea. Hell, it's so boring. OK, got the added manually troubleshooting info. Hope that helps someone help me.

  Thanks, that no longer works. I had finally realized with the help of an agent co. My norton antivirus was blocking the upgrade, even if the upgrade it was invalid. Weird, but once we have updated and downloaded the new norton stuff has worked. Thank you all for the suggestions.

• Unable to connect to the internet after you have reinstalled Windows

  It came with Vista on it, but it is basically screwed up... There was no recovery disk... so I did a clean install with a XP disk... all right except that I can't get on the internet... In the OTHER DEVICES ethernet controller PCI device, PCI Modem, SM Bus controller, unknown device and video controller (VGA Compatible) are all highlighted with a yellow question mark... Try to find the driver with my son's computer, but everything I find says that there in an internet search... until this problem is fixed, I can't connect to internet... Help, please! Thank you!!

  Hi Dreman1970,

  ·         What is the brand and model of the computer?

  Of yellow exclamation, PCI Modem and other devices Ethernet controller describes the drivers necessary for the device are missing.

  I suggest you use another computer connected to the internet to find your manufacturer's Web site. Then you need to find the driver to download links for your computer model. Once you have downloaded the drivers, you can transfer them to your computer and install them. Once the drivers are installed, you will be able to connect to the internet.

  See the following article for more information on installing the drivers:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  Let us know if that helps.

• Unable to connect to the internet after you perform the recovery on the laptop.

  Original title: after recovery on my computer dell laptop running Windows XP

  I have a laptop Dell circa 2004 with windows XP Professional on it. I contacted a bug of some kind and it was very slow and the fan even stopped working. My only choice was to use the disk installation and F8 to recover the laptop. After that I got all going again once I tried to set up a new connection and it doesn't seem to know that I have a wireless adapter or the ability to connect wirelessly. Any body can help me to understand why it does this?

  Hi Phillacio,

  In addition to the procedure step by step proposed by Shenan Stanley, you can download the network drivers from the website of Dell support on another computer, bring to this laptop computer using a flash drive and install them first.

  Then follow all the steps above one by one, and your laptop should work great.

  Response with the State of the question and we say if it worked or not.

  Thank you!

• How to connect all the image after you have moved the records?

  I have a lot of illustrator files in folder A and each file has tons of images from different folders (B, C, D). All of these files are inside a main root folder.

  Recently I moved this folder to an external hard drive, then all the illustrator files disconnect with the images. Is it possible to connect all these pictures all together instead of recreating a link one by one?

  Thank you!

  you open a file HAVE, when you get the dialog box "cannot find the file related ABC...". »,

  -Check the box 'apply to all '.

  -Click the 'repair '.

  -Navigate to the location of the new ABC file

  All images must automatically be relinked

  You would need to repeat for each file HAVE

• How can I connect to the computer after you forget the administrator password?

  Original title: LOST the PAST ADMINISTRATOR password; HELP PLEASE; I TRIED TO SOLVE THIS PROBLEM FOR 6 MONTHS!

  I deleted my account on my Windows Vista computer. I'm the only user, so I kept my user account and that you have access to my PC. Now that I can't make changes because I forgot the administrator password which CONTROL local USER ask me enter to proceed? How to recover lost administrator password or make a new one?

  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• I have a problem with the connection to the computer after you forget the administrator password.

  Original title: Windows administrator password

  I forgot my password for windows 7 on a HP Pavilion laptop. I use the fingerprint reader to log on now (Administrator). I do not have the password reset disk also. What should I do to reset the password?

  Thank you...

  
  

  Here you go:

  1. Start the computer with your CD to repair Windows.
  2. Select "Repair Mode".
  3. To set Windows to a point before you changed the password, use "System Restore".
  4. Sign in with your old password.
  5. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

  It is available, you have an installation CD or created a CD to repair.