I can't connect to the internet? I called Roadrunner and everything is good on the end there, it is something with the computer?

Similar Questions

• How can I connect to the computer without knowing the administrator password?

  Original title: I forgot the password for windows.

  Can not enter into the computer and did not have a recovery disk... Help!

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• the user name and password are incompatible. I can't connect to the computer

  I was told that I need to reset the computer to factory settings.  Is that correct, and if so, how do I that?

  If not, can you tell me how to do this if I can get my computer back operational.  Thank you

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  If niether of these suggestions help, can you post back with what follows.

  1. the complete model number and your PC Nr - see here for more information on the search for that.

  2. the full version of the operating system you use (IE Windows 7 32 bit).

  Kind regards

  DP - K

• I can't connect to the computer by using the password.

  Original title: windows 7 locked out after several incorrect attempts

  I can't connect to my computer toshiba satellite laptop after that my friend unsucessfully tried to guess my password. Now my password is not recognized and I couldn't connect to my own laptop... I have Windows 7 Home premium. I don't have a recovery disk or something like that. Help, please

  Thanks for the reply! The message I see is: "the user name or password is incorrect."

  I don't think that my password has been changed. I say this because I was the only person who knew the password. Thanks again for your help!

  If Windows says your password is incorrect, then your password is incorrect. Otherwise, he would say "locked." Here's how to get out of your situation. In light of your statement "I have a recovery disk or something like that." , you must pay close attention to step 8 unless you like taking big risks.

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before your problems began.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

  If you do not have a CD to repair Windows (which is also essential to solve the problems of Windows as a pneumatic Jack is to change a tyre) then here are your options:
  • Burn it on another computer. It takes only three minutes!
  • Borrow one from a friend.
  • Purchase one here: http://systemdiscs.com/

• How can I connect to the computer after you forget the password?

  Original title: HELP! WINDOWS 7 NETBOOK PASSWORD FORGOTTEN?

  I am unable to long on my netbook. I read through the posting a lot without results.  I tried to restart in SafeMode (networking), (command prompt) and I'm at my wits end. Need help quickly...

  Restart the computer using safe mode, and then log in as administrator. The password is often left blank. You can now set the password for all or part of other users. The next thing is to plan ahead: click Start / Help, then search for help on "password". Follow the instructions to create a key on your USB flash drive file so that you'll never find yourself in this uncomfortable situation.
  _________________________

  If this answer solves your problem, please click "Propose as answer" so that the thread can be closed. Thank you.

• How can I connect to the computer without the administrator password?

  Original title: my daughter locked her computer and can't remember the password.

  My daughter has locked her computer and can't remember the password. I'm trying to unlock the computer. The computer is running Windows 7

  It is always ask a password :(

  You did not say it, but it probably means that your daughter has changed her password and can not remember what she changed. This is why an alternative admin account is absolutely essential. You can get out of this situation as follows:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you changed the password.

  And since you probably do not burn a CD to repair Windows 7 either (which is absolutely essential for people to maintain their own PC), here's how to get one:
  • Burn it on another computer.
  • Borrow one from a friend.
  • Purchase one here: http://systemdiscs.com/

  It takes only three minutes to burn a via the control panel / backup and restore.

• I can't connect to the computer 0xc000021a error

  Original title: 0xc000021a.

  Good if one day I have reset my computer because he had firewall frozen in the middle of the screen. After rebooting once the hp screen would have happened to the top of the screen would go black. The error screen would come to the top and say that the error was 0xc000021a and once we're back to zero it does again and again and I can not sign in or anything. Safe mode does not help. need help ASAP please

  Computer

  Windows 8 HP portable 32-BIT

  Hello

  Check with HP support, their documentation online and ask questions in the forums on
  known problems with your model (or similar).

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ------------------------------------------------------------------------------------------------

  The problem may be caused by hardware such as hard drive or wiring issues among many others.

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  The link below is for Windows 7 but it will also provide information that is useful when
  works with Windows 8/8.1 if you need to translate a few commands Windows 7
  in those for Windows 8/8.1.

  Translate these methods Windows 8/8.1 (there is little real difference):

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows. (applies also to Windows 8/8.1)
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  =============

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you will indeed need to technical assistance from a real computer
  Shop (that makes its own internal service) or the system manufacturer's support.

  Bug Check 0xC000021A: STATUS_SYSTEM_PROCESS_TERMINATED

  Bug STATUS_SYSTEM_PROCESS_TERMINATED control has a value of 0xC000021A. This means that an error has occurred in a subsystem essentially user mode.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error.

  If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Parameters STATUS_SYSTEM_PROCESS_TERMINATED

  The following settings are displayed on the blue screen.

  Parameter	Description
  1

  A string that identifies the problem

  2

  The error code

  3

  Reserved

  4

  Reserved

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Resolution

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software.

  If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  ========================================================

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8 and 8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8 and 8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you have need of a system repair disc or other methods:

  How to create a "system repair disc" (CD/DVD) in Windows 8 (not 8.1)
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  How to create a recovery USB in Windows 8/8.1

  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  How to create a Bootable USB or a DVD with an ISO of Windows 8 or 8.1
  http://www.eightforums.com/tutorials/2227-create-bootable-USB-DVD-Windows-8-ISO.html

  How to start on the "System Recovery Options" in Windows 8/8.1
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Boot to the tip "Startup parameters" in Windows 8
  http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

  =======================================================

  You may need to carefully check the hard disk for errors (don't forget to inspect the cable
  much as you can).

  Don't forget to look for RootKits that can survive a format and install of Windows.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  ====================================================

  After the drive verification RootKits inspect the disc and the wiring. Then carefully
  check the hard disk for errors using the advanced methods and the producers
  Diagnostic utilities.

  These are much more efficient methods to check the disc.<->

  At the prompt of the Windows 8/8.1 disk (boot from it):

  Chkdsk /f /r
  (Space after k and before / f and before /)

  RESET

  sfc/scannow
  (Space after c and before /)

  RESET

  =====================================

  For even more detailed control:<-- manufacturer's="" diagnostic="">

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use the Hitachi utilities

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en

  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I connect to the computer without the icon?

  Original title: Inadverdently deleted the icon for the administrator who has passed, can recover us it and password?

  Mother-in-law belonging to this computer and we do not have access to administrator... we may have found the password but have removed the icon and cannot locate the account to connect?  Is there hope for us?

  Once connected to your computer, bring up a command prompt window...
  Start-> Run-> "cmd".
  and enter the command:
  net localgroup administrators
  This will give you a list of users of your system with administrator privileges.  Once you know the user name, restart your machine or logoff to access your logon screen.  Then press Ctrl-Alt-Del twice to bring up a classic logon window.  Enter the administrator user name, then the password.  If everything is copacetic, it will record you as an administrator.

  HTH,
  JW

• How can I connect to the computer after you forget the administrator password?

  Original title: LOST the PAST ADMINISTRATOR password; HELP PLEASE; I TRIED TO SOLVE THIS PROBLEM FOR 6 MONTHS!

  I deleted my account on my Windows Vista computer. I'm the only user, so I kept my user account and that you have access to my PC. Now that I can't make changes because I forgot the administrator password which CONTROL local USER ask me enter to proceed? How to recover lost administrator password or make a new one?

  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

• Can't connect to the computer

  What do I do if my computer asks me a username and password, but I install not any user name and password, what could be the reason for this? Thanks in advance to those who can give me the answer...

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• How can I connect to the computer after I lost the password of the administrator account?

  Original title: lost password windows - no disk drive

  I wrote above all forget my windows password

  the problem is that my laptop is a little, I don't have a disk drive or a recovery disc

  Hello

  Welcome to the Microsoft community.

  I suggest you for the link and check if that helps:

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  If your computer came preinstalled with the Windows operating system, I suggest contacting the manufacturer of the system and check if it helps.

• I have the wireless option, but if I use it not I can't connect to the internet.

  I have the wireless option, but if I use it not I can't connect to the internet.

  original title: difficulty borrowed from internet

  If it's the Acer utility, it is best to visit Acer support:

  http://support.Acer.com/us/en/default.aspx

• I can't connect to the Internet wirelessly

  I just replaced my wireless device and now I can't connect to the Internet wirelessly

  Hi JimMahoney,

  You have installed the necessary drivers for your new wireless device?

  You receive an error message when you try to connect to the internet using your router?

  What virus protection software is installed on your computer?

  I suggest you try the steps mentioned below.

  Method 1: Run the network troubleshooter utility in Windows 7.

  Please follow the steps below mentioned link to run the network troubleshooter utility

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  Method 2: You can also check the configuration of your new wireless device.

  Contact your Internet Service Provider (ISP) or wireless device manufacturer to check the configuration of your wireless device.

  I hope this helps.

• I deleted a virus from my computer this morning with Security Essentials, now I can't connect to the internet.

  I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000.

  original title: can't get online

  Hello BurnBurn,

  I suggest you to re-installing the driver for your network card. This may involve completely un-installing it and re - install:
  http://support.Microsoft.com/kb/283658

• I can't connect to the internet via my host after uninstalled antivirus software and restart

  I can't connect to the internet via my host after uninstalled antivirus software and restart it.

  I use windows xp on my host computer and all computers in my client. After that I uninstalled the free trial NIS version and restart my host, I lost the internet connection. Tried to restore with the restoration of the system, but when I restarted it, it said the system restore could not be made. I changed it then with my laptop and I can connect to the internet as the host.

  Hello

  This can happen if the uninstall process fails and leaves behind a Symantec registry value. See the following Symantec article.

  Unable to connect to the Internet after uninstalling Norton AntiVirus.

  http://Service1.Symantec.com/support/NAV.nsf/8d071816eedd7cac88256c0e005a96e5/751c3298ab99cf7188256d34006702e2?OpenDocument

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows?

  322756 (http://support.microsoft.com/kb/322756/ )