I can't find a pre-set 4 k to 4 k images

Similar Questions

• I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.

  I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.  I GOOGLED it but the only reference I find tells me to go to the download page on the Microsoft Web site for this product.  I went to this site and the only thing it is limited warranty info and Product Guide.  I downloaded the Product Guide, but it only covers the basic information like it do not immerse in water, do not take part and the various regulations of the FCC about the product.  There is no info in this guide on how to configure or use the keyboard AT ALL.  Guidance on how to use this product is probably somewhere?

  The dongle is not plug it into the keyboard, it plugs into the USB port on the computer.  Wireless keyboards is not related to them - think of that.  :-)

  If you are missing parts to the keyboard, I would just buy a new one.  You can buy wired keyboards for as little as $4 these days, wireless are a little more expensive of course.  Personally, I find the wireless keyboards to be a pain because the batteries always come out in one in-opportune times.  YMMV

  Good luck.

• A6000 more can't find advanced wifi setting

  I'm on a6000 KitKat 151016 update.
  I have problem with my WiFi and need to access the advanced WiFi setting. but I can't find it anywhere. It should be 3 point on the windows on the right low wireless but it is not found.

  Please help me.

  After I get in some forum, he mentions that minimized some of the advanced features in vibeUI that being employed by a6000 / +.

  It is a wifi of end of work.

• Can not find "Main card" setting in the BIOS

  I have an Optiplex 3020 using INTEL HD Graphics, which came with the unit. I recently bought 730 PNY GEFORCE GT NVIDIA graphics card, as was suggested by a Dell representative, in order to output HDMI to my TV Smart. In the section "before you begin" instructions, is said that "If you have on-board graphics, built-in, enter the system BIOS and look for a setting called"Primary Display Adapter", or something similar, then set this to PCI." If you can't find this setting, contact your system manufacturer. »

  Well, I went into the BIOS, but I can't find the setting, so maybe someone can point me in the right direction?

  Thank you

  Harry

  Oh, and I run Windows 10, where it is a problem...

• Where can I find the screen setting?

  Where can I find together to the top of the screen to download recent purchase of upgrade Adobe elements 14? I already have Adobe 11 on my computer. @

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14 | 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• New user Question: How can I find ALL my setting for my layout once I'm working on it?

  I would like to get the screenshots of my settings for each project I do so that I have them for reference.

  Thank you!!!

  OK, I think you're basically on the right track, but I think that the conversion of files to the models might be more useful than printed material. Master pages contain templates (i.e. when the margins and columns are usually changed from the defaults set during the preparation of the original Document (or they may not be modified from these defaults to all), all styles defined for the project and all the shades of color that have been defined, so you don't need to reinvent the wheel) just choose from the available options. They can also have elements of the page (headers and footers, page numbers, images placeholder for the standard page layouts, etc) pre-defined or in place.

  You can do any file in a model while recording a (file > save as... and choose the model from the drop-down list file type), or by changing the file extension to .indt. The only functional difference between a document file and template file is that when open 'normally' documents open the original, you change the document real and models open as an untitled copy, if you edit the copy and accidentally do not change the model. You can remove essentially all of the content (other than objects on a master page) of any file and save as a template and have everything you need to make a new file with the same settings.

  There are scripts available to tell you which styles are defined in a document (you can google for script InDesign Style Reporter, I think), and there may be others who will give you the other parameters. There may be something like this in the Blatner tools plugin, too. If you want a complete script, you will maybe pay someone for writing customized for you, but it would be worth a trip to the forum script (Scripting InDesign) to see what is already written that might help if you want reports.

• How can I find a service set to automatic - it disappeared after I put it in the manual.

  A few re-formats of there, I was just updated and noticed windows norton internet security that crashed, during the installation of update (while I was connected to the internet, always).  When I checked the windows system log, I noticed that a service had crashed at the same time as norton - PORT.  So after reformatting again once I load Windows 7 Home Premium and 'stop' service SEAPORT and set it to "manual".

  I just noticed in the services, it is not listed, plus.  I was going to scroll down to the list of services, after all the update and 'start' again and, standing SEAPORT on 'automatic'... but it's gone.

  Are manual mode automatically filled out the list of services and services that are stopped?  If so, is there a way to start, once again?

  Hello

  You are welcome. Let us know if you need help with Windows in the future.

• Can not find the pre-selection adjustment Local documents - help, please?

  After that technicians Apple wiped my MacBook Pro, I reinstalled all my apps, including 6 Lightroom (CC).  No problem with purchased downloads or the addition of my presets. But oh no! When I tried to add my brushes bought, I could not find the folder of Local adjustment Preset! Where would it be?

  Here's what I see when I click on the folder presets button. Do you have any suggestions as to other where I could look at? I tried Adobe & se troubleshooting forums, but no luck.

  Thanks in advance for any suggested of bugs!

  

  Oh hey, I found a solution in another post, only tangentially related. Thank you to skproductions303 for this!  (Copy and paste the solution here, in quotes, in the case where someone else has the same problems.)

  "I had the same problem, just bought a new Macbook Pro (June 2015) and Lightroom CC was this mistake as well."  Here is the dialog box that I've had with Adobe, and it cures the problem:

  Adobe: Please click on the search option in your Dock at the bottom of the screen.

  Adobe: Then click GO on the MenuBar at the top of the screen.

  Adobe:, and then click GO to folder, and then type: ~/Library/Application Support/Adobe /.

  Scott: OK, I did

  Adobe: Control-click on the folder and choose read information.

  Adobe: Expand the section sharing & permissions.

  Adobe: Click on + icon, and check if the administrator select

  Scott: OK, I chose the Admin

  Adobe: Give read and write to the Admini

  Scott: completed

  Adobe: Click the gear icon and select apply changes to included items

  Scott: OK

  Adobe: In the Finder window, click GO and select GO to folder

  Adobe: Type in
  Adobe: / Library/Application Support/Adobe/ and press enter

  Scott: completed

  Adobe: Control-click on the folder and choose read information

  Adobe: Expand the section sharing & permissions.

  Scott: ok

  Adobe: Give read and write permissions to all users

  Adobe: Then click on the sign + and add the rest of the users from the list

  Scott: completed

  Adobe: Now, please try to use the Lightroom from your computer.

  Scott: Thank you - it works! »

• Where can I find example of vbnet code to snap or capture images

  I find several examples for image capture (Snap, Grab, etc.) written for vb6 and c++, but not one example using vbnet. Am I missing something?

  .NET examples come with our vision acquisition software, but you must specify that you want the samples installed during installation.  Usually this option is automatically selected if the installer can see that you have already installed the development environment.  In order to install the NOR-IMAQdx and other examples of image acquisition driver, you will have to repair/installation of the software, then select examples to install.  First you must go to the Windows Control Panel-> programs and features:

  

  Then select National Instrumenst software the click "uninstall/change".  The following window should appear.

  

  NOR-IMAQdx select on CHANGE

   

  
  

   

  
  Select this option to install the examples in .NET languages support.  Once the samples are installed, they should be located under:

  Start > programs > National Instruments > Vision > textual examples > NOR-IMAQdx > dotNET examples

• How can I find my monitor to display the horizontal of the image instead of vertically. Do not know what is happening. Vista Home Premiun

  The question above.

  Hello

  Try this:

  Press Ctrl + Alt and arrow key TOP.

  If that does not fix it, Ctrl + Alt and try each of the other arrows until the problem is fixed.

  You may be able to use this method if necessary:

  You can right click on an empty part of the desktop > select Graphics Options > then Rotation.

  See you soon.

• How can I find out what filter effect, I used on an image after that I have recorded?

  I used a series of filters that have given an image, a very cool pictorial quality - Impressionist painting.  I forgot what steps I took to get this effect.  I tried to go back and look at the history of the image, but who told me something since I already saved the image.  The finished photo looked like painted brushstrokes swirly with depth as you would get if you painted it in reality.

  I remember an old program as fractal painter used to have filters like this.  I don't think that Fractal painter even exist anymore.  Anyone know what I have done to get this effect, or how I can watch the image data to understand what I used filters?

  It resembles oil paint, but this filter is not included with CC 2014.  Is it possible that you did with the original CC?

• How can I find/get drives of Installation of Windows XP Tablet PC Edition for Toshiba Portege M200? Toshiba has none.

  Hello

  Can someone please tell me where and how can I find/get a set installation discs for "Windows XP Tablet PC Edition" for a laptop Toshiba Portege M200/tablet?  Repair laptop customers, but I'm in need the installation discs for tablet PC and touch screen features may work correctly.  I, ve contacted Toshiba and they do not have any OEM system to sell records of restoration, so am now need to find a legal set.  I bought a set of disks that were supposed to be the Toshiba Windows XP table PC Edition, but they were false records.  In any case, if someone could help me I sure would appreciate it.

  disaksen

  Hello, Disaksen,

  If the manufacturer does not, while Microsoft can't as well.

  to obtain a replacement disc, Microsoft's orders to the (800) 360-7561 service, phone and ask that your damaged disk. If you are outside the United States, contact the Microsoft subsidiary for your area. To locate your subsidiary, visit the following Web Microsoft World Wide Offices Web site:

  http://www.Microsoft.com/worldwide/
   
  How to get the installation discs for Windows XP for installation of boot floppies - download link included
  http://support.Microsoft.com/kb/310994
  Who should download the installation diskettes? You must download the installation diskettes if all the following conditions are met:
  • You install a new version, full of the retail Windows XP.

    Note An upgrade to Windows XP installation does not require the installation diskettes.

  • You have a working CD drive, but you cannot start your computer from your CD-ROM.
  • You can start your computer with a floppy drive.

• Backup and restore cannot find any backup sets.

  I had to reinstall windows 7 prof 64 using the original recovery partition and want to restore my data files that I had backed up using the backup and restore windows.  The files are on a network drive.  "When I run the restore I have 'Browse' the network choose the folder labeled" backup files aaaa-mm-jj xxxxxx "but it comes back with the error message: Windows could not find the backup sets on \\xxxxx please select a different location.

  Early research indicated it could be a permissions problem and the network drive is not a Microsoft Windows type disk I copied the folder and all the files on my C: drive and checked that they were all showing all permissions to all the users/system/everyone etc.  I tried again.  Same result.  I tried now selection of locations right differnet down the folder hierarchy (for example: in 'Catalogue' records and individual records date) but still get the same message.

  I realize that I could go in the individual zip files and restore everything manually, but the backup set has 9 different files and 525 zip datr files each with a tree long through the files of the hard disk C: before getting to the part of My Documents with data.

  It would be so much easier than Microsofts back/restore program does what it is supposed to do.  The only references I found in the web site of Support MS concerned questions of authorisation and in ensuring that the original folder is in the format "Yyyy-mm-dd of backup files xxxxxx"  I've done both.

  Any help gratefully received.

  Larry Gru

  Original title: restoration of Windows can't find the backup sets

  I solved the problem. It seems that, for a new installation (reinstallation of the operating system), it is necessary to set up a backup to the location of the original backup. After saving the new facility in the same place as the old backups, older backups are available to be applied.

• Where can I find key for business to Vista pre-installed on my laptop?

  Where can I find key for business to Vista pre-installed on my laptop?  Yes, I have a legal authenticated copy of Vista business on my laptop.  I recently had to reinstall everything on my laptop, but had some problems using the backup disks that I initially created for this purpose.  I finally managed to do it, but it would be so much easier in the future if I had a with key correct installation disc.  So, first of all, where can I download an Installation of Vista Business disc; and second, where I look on my current laptop installation to determine the key authenticated for my current installation?  Is this possible?

  Hello

  Many manufacturers of computers DO still have available Vista recovery discs.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Where can I find the setting global Inbox?

  I'm about to go crazy. I got Thunderbird for years, and all my pre-existing accounts work the way I need/want to. But it seems that perhaps TB has moved/deleted an option in an update since then? I created two new email addresses, and they all have two individual inboxes, which I don't want. I want that spills into a single Inbox. As far as I can tell, I have all OTHER folders (sent, drafts, junk mail, etc.) configured to use the global folder settings, but I can't find the global Inbox option anywhere.

  According to the knowledge base, there under Advanced-> server settings, but I'm not in there. What Miss me?

  Are - what you happened to create new IMAP accounts? Global Inbox is only available with the pop accounts

  See this article.

  http://KB.mozillazine.org/Global_Inbox