I can't fix virus/spyware

Similar Questions

• How can I fix a virus problem that made my unusable Safari?

  How can I fix a virus problem that made my unusable Safari?

  Force Quit Safari, then restart Safari while holding the SHIFT key.

• How can I fix STOP: 0 x 00000024 (0x86EEC230, 0xC00000102, 0 x 0019023, 0 x 00000000) error? Is this a virus?

  Hello

  My computer is a Dell Dimension E521 with a 64-bit AMD Athlon processor.

  My PC is running Windows XP Home Edition.

  I restarted my computer and I found myself with a blue screen with an error message that looks like this:

  There is a problem

  Windows stopped to protect your computer.

  If this is the first time, you've seen this screen restart your computer if this isn't the case, disable or uninstall all software antivirus, defrag software, backup software and then restart your computer.

  Techniques: STOP: 0 x 00000024 (0x86EEC230, 0xC00000102, 0 x 0019023, 0 x 00000000)

  How can I fix it?

  I tried following instructions on screen ther, but as I can not even access windows Safe Mode or one of the other options avaialable on the previous black screen I don't know what to do...

  I asked a speaker to the work that might be able to help and I followed her instructions to restart the system from a cd, but all, I found myself with a blue screen which revealed the following:

  Installation of Windows XP Professional at the top and by examining the 238418 MB disk 0 at Id 0 on bus 0 on atapi...

  He also said that it is a virus? Is it? I read that there is a system error or an error in registry!

  How can I solve this problem?...

  When I press F12 to display the boot options, it gives me an option to run the hard drive diagnostics?

  It would help me atall?

  Hi joel.

  Your information really help!

  I tried to restart it a Windows XP disc and got in what concerns the installation of a new installation of Windows XP... then it froze just!

  The screen said something like this:

  Installation of Windows XP Professional at the top and by examining the 238418 MB disk 0 at Id 0 on bus 0 on atapi...

  When he asked me if I wanted to I wanted to repair a current installation of Windows XP or install a new do you think I should have pressed R to repair?

  I was using a professional Windows XP disk and not Windows XP Home Edition, do you think this could be the problem?

  I have a Windows XP Edition family multiboots disc is what it takes?

  Said Chaos_Edit chkdsk causes problems?

  What is the difference between chkdsk /r and chkdsk: / f?

  Thank you bro

  Respect

  Try to repair first.

  Put the disc in and go ahead and use the chkdsk command.

  You have no more options.

  You can't run windows, then you must fix it.

  Equip the drive.

  When the screen

  Press r

  type in

  Chkdsk /f

  Press ENTER.

  and wait.

  If this does not work, I suggest a restoration of the system, or the start of the last known configuration.

  If these two do not work, you will need to reinstall windows.

• Windows Exployer will not respond in 'Normal Mode', in 'Safe Mode' or in 'clean boot '. "Fix it" even does not work. How can I fix this problem?

  Windows Explorer does not work in 'normal', in "Safe Mode" Mode or in "clean boot".  Same 'Fix it' does not.  How can I fix this problem?  I have Win 7, 64 bit.  Thank you.

  Hello

  1. do you receive any error messages?
  2 has there been any changes made on the computer before the show?

  Method 1:
  If this solves the problem, you can run check and the (SFC) System File Checker tool. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the problem persists, you can create a new user account and check if the problem still persists.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 3:

  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
   
  I hope this information helps!

• How can I fix "the program can't start because MSVCP110.dll is missing on your computer. Try reinstalling the program to fix this problem. "

  Hello.  I've been infected by a virus on my Windows 7 desktop.  After all the anti-malware/spyware and repair that I did, I now the above message.  How can I fix it?  Thank you!

  This is part of the redistributable Visual C++ 2012.

  You can download it from

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=30679

  If you have 32-bit Windows, install vcredist_x86.exe.

  If you have 64-bit Windows, install vcredist_x64.exe and vcredist_x86.exe.

• How can I fix svchost?

  How can I fix svchost?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files. Once removed all malware these should help restore the WMP.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• No matter what I do on firefox, I get a message that the action is not reliable. How can I fix it?

  I started this morning, opens Firefox as usual. The normal task bar has been replaced by a taskbar of Bing. I couldn't get rid of him. So, I tried to reset Firefox. The taskbar of Bing was not deleted. I uninstalled firefox and downloaded the latest version and installed. I also uninstalled the taskbar of Bing as found in my list of programs. I opened Firefox and no matter what I select on the menu or on a website a message appears saying that the site is not reliable. It is as far as I can get in Firefox! The message arrives even for internal actions within Firefox. How can I fix it. It's very frustrating!

  Make a check of malware with several malware scanning of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Desktop image freezes, I put computer to sleep, he wakes up on his own and picture freezes. I have image change every 5 seconds. How can I fix?

  Desktop image freezes, I put computer to sleep, he wakes up on his own and picture freezes. I have image change every 5 seconds. How can I fix?

  Get a backup full system, like - especially if you use a Mac Pro with 10.6.8 - then your material is more old enough to be at fault.

  Once you have a full backup and up-to-date...  More information is needed:

  What is the freezing of the entire or just computer screen background image?

  Start in Safe Mode and stop and restart normally and see if that clears the problem.

  If you have the anti-virus or anti-malware installed or any tool that claim to clean, optimize or protect, delete all those which, according to the instructions from the suppliers of package.

  Open Console.app from Applications > utilities and look for repeat blocks of diagnostic messages.   Some diagnostics will look alarming, but they are normal and expected.   Looking for blocks that are repeated quickly.   Post an article - usually five or ten lines at most - of any repetition of blocks.   Please do not share more than one or two sections and lines not more than a hundred post or so and please do not post long blocks of repeat messages.

• How can I fix my exc of duration of fx which is corrupt?

  How can I fix my duration of fx corrupt?

  Hello

  1. what operating system is installed on your computer?

  2. What is the full error message?

  3. Once you get this error message?

  Follow these methods.

  Method 1: You can follow the steps in this article. What is a runtime error?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-runtime-error

  Note: By running anti-virus software, data files that are infected will be deleted, which means that there is a risk of data loss.

  Method 2: If the method above does not help, I you suggest to uninstall the previous version of the Java components that are installed on the system and then reinstall it.
  
  Step 1: follow the steps mentioned in the article to uninstall Java from the system.

  How to uninstall Java on my Windows computer?
  http://www.Java.com/en/download/help/uninstall_java.XML

  Step 2:
  Follow the steps mentioned in the article to install Java on the system.
  How do I manually download and install Java for my Windows computer?

  http://www.Java.com/en/download/help/windows_manual_download.XML

  
  

• My dns server doesn't let me log on to certain websites. How can I fix?

  DNS server

  My dns server won't let me open a session on some sites how can I fix I usually get a message like cannot find signin.ebay.com

  Hello

  1. What is the operating system installed on your computer?

  2. which web browser you are using?

  3. What is the exact error message you are getting?

  4. you are using the proxy settings?

  5. this happens with all sites or with any specific any website?

  6. don't you make changes to the computer before the show?

  If you use Internet Explorer, please follow the methods described below.

   

  Method 1:

  Follow the steps from the link below.

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897

  Method 2:

  Try disabling the security software and check if it works very well.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• How can I fix error 0x800C0133 # for Outlook Express 6

  I had been away from my Outlook Express 6 on this computer for several months and when I went to download e-mail messages that have been accumulated, he kept downloading the same emails again and again until there were about 70 000 e-mails between my account from Comcast and Hotmail via Outlook Express.  When I tried to remove them, I could not, then at some point all of my emails have disappeared and I can send emails, but I can't receive them and I get the error message 0x800CO133 and I don't know what to do.  How can I fix it?

  Error number: 0x800C0133 = a corrupt Inbox.

  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

• The RPC server is unavailable. How can I fix it?

  I have Windows XP SP3 and I try to install a Dell 964 all-in-one printer and every time it almost finished installing it stops and I get a message that says the server RPC is unavailable. How can I fix it? I don't know I asked this question in the right place, but please, someone helped me. Thank you, too, my CD player stopped working. I can fix this? I had to go to Dell and download the installation of the printer, but I also have the CD that came with the printer. And I had to use you same cable to connect the printer to my Dell PC that I used with my HP printer, but it broke and I am trying to replace it. Thanks again.

  Cindy

  Hi Lucinda,

  Thanks for posting your question on the Forums of community of Microsoft.

  You did changes to the computer before the show?

  Here are some ways you can follow to resolve the problem:

  Method 1:

  The Remote Procedure Call (RPC) Service service must be started and startup type must be set to automatic.
  Steps to follow:
  a. Click Start, type services in the start search box and press ENTER.
  (b) in the Services window, find a remote and made procedure call a right click on it to select Properties.
  c. under the general tab, make sure the startup type is automatic and the Service status is started.

  Method 2:
  Disable security programs antivirus or other software installed on the computer and check.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Check out the link and follow the steps:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For the problem with the CD drive, see the link:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this solves the problem.

• Have xp with package 3. How can I fix freguent Runtime error popups?

  Frequently receiving "Runtime error" pop ups in Windows XP Professional WITH package 3

  How can I fix it?

  Frequently receiving "Runtime error" pop ups in Windows XP Professional WITH package 3

  How can I fix it?

  Deciphering...
  You have a computer with Windows XP with Service Pack 3 operating system installed.  You get a few strange popups (guess that just started), and you are concerned.
   
  Without more information about what these 'mistakes of execution' are exactly or when you get them, etc...
   
  (1) try a restore of the system to a date BEFORE the problem started.  If you have "lived with this ' for a while - this may not be a viable option.
  (2) cleaning of the machine a little...
   
  Uninstall all internet plugins (Adobe Flash Player, Adobe Shockwave Player, Adobe Air, Adobe Reader, Apple's Quicktime, Apple iTunes, RealPlayer, Real Alternative, Microsoft Silverlight, Java Runtime Environment (JRE), etc.)  Uninstall internet toolbars (and later - do not re-install an ANY of them.)  Thanks to Add / Remove Programs Control Panel.
   
  Reset Internet Explorer default.
  If used, reset the default values for Firefox.
  [Note: If you don't have any other browsers installed at that time, taste: Mozilla Firefox, Google Chrome and Opera are decent.]
   
  Restart the computer.
   
  Install the following plugins:
  Adobe Reader
  Adobe Flash Player
  Apple QuickTime
  Microsoft Silverlight
  Java Runtime Environment
  K-Lite Codec Pack BASIC
   
  Be careful when installing each of them to NOT install anything other than the application.  No additional software such as bars of tools or scanners virus or other - uncheck options you install (go through the steps of each and READ/UNDERSTAND what you click on!)
   
  Restart the computer.

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Delete everything is found.

  Restart the computer.
   
  There are many clickable links in the text above.  Be sure to use the instructions given to each link to help in what it is complicated and it please, come back to ask more questions, followed or just let everyone know how things went.  Thank you!

• I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?

  I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?

  This happened after the execution of virus / malware scans and found some. The supposedly fixed it, but now I can't access the internet. It still works on my local network.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps from the link below

  http://support.Microsoft.com/kb/299357

• Scanning E-mail gives SMTP response and is not available. I'm not technical; How can I fix it?

  Scanning E-mail gives SMTP response and is not available. I'm not technical; How can I fix it?

  original title: scanning
  We really need the message full error, but for you to save time...
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for many programs AV, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.