I can't get Apache configured correctly El Capitan

Similar Questions

• Can I get a configuration of single language somewhere? How can I find the license key for my installation.

  Original title: single language of windows 8

  I had 8 single language on dell inspiron 15-3521 pre-installed windows. I did repartitioning disks and windows recovery options 8 as 'reset your pc' and "Refresh your pc" has stopped working, saying that the not found recovery partition, but it was intact. I have no recovery disk.

  Can I get a configuration of single language somewhere? How can I find the license key for my installation.

  Hi Mohammed'metwally,.

  Please answer this question to get more clarity on this issue.

  • The application or program that you use the partition of the drive?

  This problem may occur if the partition table is damaged or altered. As a result, the recovery partition does not work. I'm sorry to know that you are facing this problem.

  You will not get the unique language anywhere to download setting. You have an OEM computer that comes with the product key integrated into the BIOS. The product key of Windows 8 on new machines is now integrated in the machine. It uses the Secure Boot technology. When you perform a new installation of Windows 8, the installation program ask a product key and will be automatically get it from your system and proceed with the installation.

  As Windows 8 came pre-installed, you must contact the manufacturer of the computer with this problem for more help.

  http://en.Community.Dell.com/?~CK_=_mn

  Dell technical support: http://www.dell.com/support/contents/us/en/04/category/Contact-Information/Technical-Support?c=us&l=en&s=bsd&cs=04

  Thank you.

• HP Officejet Pro 8000 Wireless, Mac OS 10.7.2 can't get it configured to run wireless

  I have an iMac OS Airport Extreme and an HP Officejet Pro 8000 Wireless Router 10.7.2.  Recently, I replaced my router with an Airport Extreme.  My printer installation CD is for OS 10.4 or 10.5.  I'm trying to configure the 8000 wireless but without much luck.  As I understand it, the HP 8000 Installer is now included in OS 10.7.  I followed some of the elements of an another post about it with OS 10.6.  Somehow I can't get to the place were the installation of the printer asks me to choose a network.  I have updated all the software, installation of a printer connected to a USB cable.

  I figured this out (with the help of the Doc print "is there driver for Deskjet 3050 for Mac OSX 10.7).  Once I stopped thinking like the approach of Mac OS 10.6 with a hp utility things were easy.

  -delete all printers already implemented

  -rub the old hp software

  -Unplug the usb cable from the printer if you have connected

  -restore the network printer hpsetup (press the power button / stop, network 2 x button, cancel 3 x, output power)

  -Print the wireless network test report (updated 2 x key and press the network button). Check the ssid is hsetup

  -change the mac to hpsetup wireless network

  -go to the sys pref > print scanning

  -Add the 8000 printer

  -Click options & supplies, and navigate to the printer Web page

  -use the network wizard and change the network of hpsetup to your network

  -finishing

  -Return to the sys prefs and change the network to your network

  -go to the printer and print the wireless network test report (updated 2 x key and press the network button).  Make sure that the SSID is your network

  -try to print something on your printer.  It might take a bit of time first impression.

• How can I get the configuration file for installed software to the other PC

  Hello

  My car is Zion & I'm managing the all COMPUTER software & hardware requirement, my request is that if I go to the option of payment, how can I get license information and the invoice of Adobe and can you install the software in different PC.

  I am not able to contact by phone if possible please contact me or send me email with the solutions.

  Thanks and greetings

  Executive Shaikh

  [personal information deleted - mod]

  Hi Rafiques27191756,

  Looks like you ask for assistance with a volume license. If this is the case, information about purchase of Adobe programs are available here: Adobe licensing, discounts | Adobe purchase programs. If you buy a volume license, you will be able to view and manage your account as well as learn how to deploy the software on different PC on the Site Web of Adobe License. In the meantime, you can get individual help in contacting customer service by using cat.

  In case you have any questions about the purchase and deployment of a volume license, I'm moving this discussion to the deployment to the Cloud, business, & CS creative team. If you are interested in individual licenses instead, please let me know and I will move the discussion in a more appropriate forum... For the record, every single license can be activated on up to two computers.

  Let us know if we can provide more information or assistance.

  Best,

  Del

• where can I get the installer of windows 8 single language

  I had the unique language of windows 8 on Lenovo z580 pre-installed. I did repartitioning disks and windows recovery options 8 as 'reset your pc' and "Refresh your pc" has stopped working, saying that the not found recovery partition, but it was intact. I have no recovery disk.

  Can I get a configuration of single language somewhere? How can I find the license key for my installation.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3

  Computers laptops Lenovo include a function called the Lenovo OneKey Recovery button, which is used to boot into the recovery environment and to reinstall Windows.

  If this does not work, contact technical support http://www-307.ibm.com/pc/support/site.wss/homeLenovo.do and request replacement CD-ROM

• Where can I get OSM Provisioning Administrator component?

  Hi all
  Can anyone let me know where can I get the configuration administrator OSM component from? I've been Googling for it and was not able to find the necessary things... Thanks in advance.
  
  
  
  Kind regards
  Heraud

  Here is a simple procedure to install the required components of the Oracle administrator OSM demanding customer.

  Install one of the following.

  · Oracle 11g Data Access Components for Oracle Client

  · Version of Client instant Oracle 11 g 11.2.0.1

  During installation, make sure that you select (using the custom option) and all dependent components.

  · Oracle OLEDB provider

  · Objects for OLE Oracle

  · Oracle Data Provider for .NET

• I need to install the SP1 for Vista, but get message at the stage of installing "updates are not configured correctly. Change back '

  I need to install the SP1 for vista before SP2 for vista in order to use 2012 TrendMicro internet security. Thanks in advance

  Original title: Hi can someone help me please.  I need to install the SP1 for vista, but get this message at the stage of installing "updates are not configured correctly. How can change recovery"I fix

  I understand that you now have returned back to factory settings and have installed all updates except for service packs.

  .

  You will need to install the required service packs-

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  You will need to install SP1 before installing Sp2.

  Once your computer is up to date, then you can think of Windows 7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  I can't help you with the trend, but from memory, you must allow it's Installer to download to facilitate the download and installation etc.

• Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

  Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.

  Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".

  Hello

   
  You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.
  Reference:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
   
   
   

• Can't get HP 2100 M configured as USB printer

  Recently, I upgraded my systey (Dell, Vista 64-bit) and can't get my HP 2100 M laser printer configured correctly.  The new system has only USB ports, no connection to printer port, so I went thr cable to a USB/parallel printer cable.

  Vista does not recognize the device.  That is, the plug and play is not can not confiugre the printer correctly.

  I downloaded the latest drivers from HP HP and point to them during installation.  Installs the printer, but not properly because it does not work.

  After installation, a few times when I do a Print Test Page, the page just sets in the queue of the printer, and a few times the page disappears.

  When I do an add printer, there is no "Virtual printing Port for USB" port to connect the printer to.

  Any ideas or suggestions.  These USB cables are all the same.  I had to run once (do not know how or why), but now, not at all.  I spent 2 days trying to get it configured.

  Ron in Round Rock

  Are you sure that the printer is compatible with your version of Vista http://www.microsoft.com/windows/compatibility/windows-vista/ and that you use the correct drivers?

  Most likely the driver for the USB parallel cable is not installed correctly. Go to your device manager, find the cable to printer USB, right click and uninstall. Then, unplug the USB cable and install the drivers before plugging back in. Then plug, you should get the ToolTip "new hardware found" and be in good shape (at least for cable).

  You can't add a printer to a UsB printer - it should automatically detect and guide you through the installation process without requiring you need to select a port (it will do so automatically).  I suspect that the problem is the cable and once you set, the installation of the printer will run smoothly.  USB devices are generally very easy to install because of this.  Then again, you get to install (although I don't know correctly) so I wonder f it may really be the cable - but we'll see).

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I get rid of a bad automatic correction?

  My iMac OS X 10.11.3 keeps automatically insert my wrong e-mail address when I try to type my correct e-mail address.  How do I remove this incorrect e-mail address in its memory? I try to type leadart and it automatically inserts the leader.  Can help get rid you of this feature?

  Please watch on http://email.about.com/od/macosxmailtips/qt/Delete_an_Email_Address_from_Auto_Co mplete_in_Mac_OS_X_Mail.htm , I think it will answer your questions.

• How can I get the correct product key for my sleekbook want PC4

  How can I get the correct product key for my sleekbook desire 4 PC

  Hello

  As mentioned in your other post you can get it from Microsoft with your money:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/i-purchase-envy-notebook-PC-4-1100se-how-can-i-get-the/m-p/2853225

  Kind regards.

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Good afternoon__I have lost my installation CD. I have a correct key at the back of my PC. How can I get an another installation CD? ___I trying to reinstall my operating system. The PC is already formatted. ___Thank you in advance. __ANPW__

  Good afternoon

  I lost my installation CD. I have a correct key at the back of my PC. How can I get an another installation CD?

  I'm trying to reinstall my operating system.  The PC is already formatted.

  Thank you in advance.

  ANPW

  How to replace Microsoft software

  Carey Frisch

• Try to use Windows Update to install 2 updates, get "updates are not configured correctly. Restoration of the changes

  Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.

  Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
  After I then connect I get the message ' Windows to not install important updates.

  Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.

  I tried to do this several times on 2 days, but get same problem.

  This gives a shot.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]

  10. restart one last & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  =======================================
  WARNING: MS MVPs represent or work for Microsoft
  http://MVP.support.Microsoft.com/GP/mvpfaqs

• I can't seem to connect to my mail, I tried all the user names I can think. where can I get the correct information?

  I can't seem to connect to my mail, I tried all the user names I can think.  where can I get the correct information?

  Sounds like Hotmail you use. Yes?

  If so, repost to Forums Hotmail - Hotmail Sign In IssuesThreads section:

  http://windowslivehelp.com/forums.aspx?ForumID=b782602b-8e7c-40D8-a66b-b44824497a17